BOSCH DWZ2CB1I4 Clean Air Stand Instruction Manual

DWZ2CB1I4 Clean Air Stand
Instruction Manual 9001620888 (030328)
Installation instructions

DWZ2CB1I4 Clean Air Stand

**** General information

• Read this instruction manual carefully.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• The appliance can only be used safely if it is correctly installed according to the safety instructions.
• The installer is responsible for ensuring that the appliance works perfectly at its installation location.
• This instruction manual is intended for the installer of the optional accessory.
• Only a licensed expert may connect the appliance.
• Switch off the power supply before carrying out any work.

Safe installation

Observe the safety instructions when installing the optional accessory.

**WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
▶ Keep packaging material away from children.
▶ Do not let children play with packaging material.
WARNING ‒ Risk of injury!**
Components inside the appliance may have sharp edges.
▶ Wear protective gloves.
Included with the appliance
After unpacking all parts, check for any damage in transit and completeness of the delivery. → Fig. 1 , → Fig. 2

Installing the circulating-air guide

1. Remove the flue duct.
   You can find information on how to remove the flue duct in the installation instructions for your appliance.

2. Fit the circulating-air guide into the angle brackets.  → Fig. 3

3. Use the 2 hose clips to secure the hose to the circulating-air guide and the air-pipe connector. → Fig. 4

4. Tighten and, if required, shorten the hose.

5. Fit the flue duct.
   The slots on the inner flue duct section point upwards.
   You can find information about the installation of the flue duct in the installation instructions for your appliance.

Odour filter for circulating-air mode
Odour filters bind odorous substances in air recirculation mode. Regularly replaced odour filters guarantee a high level of odour removal.
With normal use (approx. one hour a day), the odour filter must be replaced every 6  months. The odour filter cannot be cleaned or regenerated.
Replacing the odour filter

1.  Remove the grease filters.
   You can find information about removing the grease filters in the operating instructions for your appliance.

2. Insert the filter holder. → Fig. 5 , → Fig. 6

3. Position the odour filter, push it upwards and fold it up. → Fig. 7
   The foam must be compressed when you insert it.
   When inserting the odour filter, ensure that the arrows indicating the air flow direction are pointing upwards.
   a Once the odour filter remains in place in the appliance without falling out, it has been inserted correctly. → Fig. 8

4. Insert the grease filters.
   You can find information about installing the grease filters in the operating instructions for your appliance.

5. Dispose of the old odour filter with the residual waste.
   The odour filter does not contain any harmful substances.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>