STERNGLAS Marus Black-Rubber Watch Instruction Manual
- June 12, 2024
- sternglas
Table of Contents
Manual Marus
How to setup your timepiece
01 Before you can start, you have to loosen the screw-down crown by unscrewing it from the winding. Carefully turn the crown counterclockwise until you feel the resistance ease. The crown is now in position 1.
02 In the next step, you have to ,,wind up” your timepiece. To do so, wind the crown (in position 1) clockwise about 15 times. You will notice that the mechanism in the movement moves and a slight whirring sound can be heard.
03 Now you are ready to set the time. To do so, pull the crown to position 3 and turn until the hands are in the correct position.
04 To set the date, push the crown to position 2. Wind the crown counterclockwise until the correct date is displayed.
05 To secure the crown into the case again, move it to position 1. With a little counterpressure while turning it clockwise, screw it back into the thread. Keep screwing until the crown does not move any further.
Note: Your date changes at noon? This is because the movement does not ,,know” if it is noon or midnight. If so, simply wind your timepiece forward by 12 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>