STRIPLOX Pro 23 Rapid Assembly Connector Installation Guide
- June 12, 2024
- STRIPLOX
Table of Contents
STRIPLOX Pro 23 Rapid Assembly Connector Installation Guide
To be used in conjunction with the Striplox Pro 23 installation guide.
Attach male Striplox Pro 23 onto the object following Striplox Pro 23 installation guide. Use the female Striplox Pro 23 part on the wall.
Attach the Striplox Pro 23 Jig onto the Striplox Pro 23 part by sliding into its fully locked position.
Position object and push against the wall firmly. The jig will indent the corner screw positions for the opposing Striplox Pro 23 part.
Fix the Striplox Pro 23 part into position using the indented markings using sufficient screws for satisfactory embedment. (note: dry wall mountings may need to be used)
Place the object onto the wall push and slide into position ensuring the parts have interlocked.
Striplox™ use is subject to variable material and conditions. Technical information and load capacities are a guide only without warranty
Striplox™ and Joinlox® are trademark and patent protected internationally. – Installation Guide Pro 23 Jig
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>