Hengmao Electronic HP3 Thermal Label Printer User Guide
- June 12, 2024
- Hengmao Electronic
Table of Contents
Product guidelines
Thermal printer
Packing list
Product information
Name: Thermal label printer
Connection: Bluetooth
Print type: Thermal print
Battery capacity: 3.7 V/1000 mAh
Paper bin capacity: 15 * φ45mm
Product size: 81.3 mm in diameter and 37.3 mm in height
Product size: 81.3 mm in diameter and 37.3 mm in height
Paper cutting method: Manual tearing paper
Support consumables: continuous/gap paper (gap distance 10mm）
Model: HP3
Print accuracy: 203DPI
Charging interface: Type-c
Charging instructions
- 5V ****1A input charge, it is recommended to use a mobile phone charger for charging;
- Recommended after the first use after the purchase please charge first;
- Long non-use interval of 3 months to charge once, so as to avoid long -term natural loss of lithium batteries can not be charged.
- Recommended charging time: 2 hours
Warning! This product is not sold with power adapter, if consumers use power adapter supply, they should buy supporting use. CCC certification and meet the requirements of the standard power adapter, adapter output specifications should meet: 5V 1A
Visual description
Power indicator status light description
LED| • Green light often bright: work
• Red light often bright: paper shortage, open cover
• Red light flashing: low power
• Standby: The Green Light is always on.
• Power off: The Green Light Flickers slowly; when it is full, the light goes
out
---|---
Paper roll installation
Connect the print operation steps
Support: IOS/Android system
- Device Boot, long press the boot button, the indicator lights up after release; as follows:
Download the APP, in the mobile APP store to search for“ XEasy Label” or scan the following two-dimensional code, download and install X Easy Label APP, during the installation process, allow the application to obtain the relevant permissions of the mobile phone;https://share.xplable.com/h5/download/download_oversea.html- Connect the APP connection, and the printer will install the paper to boot. At the same time, the Bluetooth of the mobile phone will be turned on. Enter the APP and click the“+” number in the upper right corner to search for the printer device and click the connection. After the connection is successful, the icon next to the model in the top left corner of the APP’s home page lights up;
- Template printing, according to the printer currently placed label Paper Type (continuous or gap label paper) , in the home page to choose the corresponding type (home, skin care, kitchen…) template, click on the template to modify the text or pattern, and then print;
- Click on the middle icon at the bottom of the home page to print the new label. According to the label paper in the body, select the corresponding paper type “Continuous” or “Gap” to edit and print. Later, when you need to change the paper type, at the top of the self-edit page, click toggle (as shown) to switch between “Gap paper label” or“ Continuous paper label”, and then click the label Specification Option, after determining the type and size of the label loaded into the printer, select “OK”, and then enter the corresponding text or pattern in the text box, and then print;
- Text settings, select the text input label, that is, the text appears at the edge of the dotted box, and at the bottom of the screen text settings options, you can “Input” text, select text “Font”, and the text of the “Typesetting” operation
Electronic information products toxic and harmful substances declaration
A poisonous substance or element| Plastic casing| Circuit
board| Internal cable| Batteries
---|---|---|---|---
Aluminum (Pb)| 0| X| 0| 0
Mercury (GG)| 0| 0| 0| 0
Cadmium (CD)| 0| 0| 0| 0
Hexavalent chromium (Cr6)| 0| 0| 0| 0
Polybrominated biphenyls (pbbs)| 0| 0| 0| 0
Polybrominated diphenyl ethers (pbdes)| 0| 0| 0| 0
This form is prepared in accordance with SJ/11364
0: Indicates that the content of the hazardous substance in all homogeneous
materials of the component is below the limit specified in GB/T 25125-2011.
x :Indicates that the content of the toxic substance in at least one
homogeneous material exceeds the limit specified in GB/T 26125 -2011.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and This device must accept
any interference received, including interference that may cause undesired
operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Thank you for using it
Documents / Resources
|
Hengmao Electronic HP3 Thermal Label
Printer
[pdf] User Guide
HP3, 2BCBZ-HP3, 2BCBZHP3, HP3 Thermal Label Printer, Thermal Label Printer,
Label Printer, Printer
---|---