syble XB-C20 2D Bluetooth 2.4G Barcode Scanner User Manual

syble XB-C20 2D Bluetooth 2.4G Barcode Scanner

Structure Chart

1. Button ① or button ②: Press to scan the barcode;
2. Button ③: Press and hold for 5s to enter the pairing state.
   

Product Features

1. Powerful decoding chip to read most standard 1D/2D barcodes;
2. Support Android/ios system, can replace PDA, scanner, mobile phone scanning;
3. Bluetooth connection, simple and fast;
4. Long wireless range up to 50m in open yard.

Technical Parameter

Barcode Scanner

Date Item| Parameter
Light Sources| 527nm Aimer, White LED
Decoding capability| 1D:EAN-13,EAN-8,UPC-A,UPC-E,
ISSN,ISBN,CodaBar,Code 128,
Code 93,ITF-14,ITF-6,Matrix 2 of 5,
Interleaved 2 of 5,GS1 Databar(RSS), Industrial 2 of 5,Code 39,Code 11,
MSI-Plessey.
2D:QR Code,Data Matrix,PDF417,
Micro PDF417,Micro QR,Aztec,
Maxicode,Hanxin Code.
Scan Type| Image CMOS
Resolution| 640*480
Field Angle| 48°(H) x 36°(V)
Precision| ≥4mil
Scan Angle| Yaw45°, Rotaion 360°, Pitch45°
Scan Mode| Manual/Continuous/Automatic Scintillation
Depth of Scan Field| EAN-13(13mil): 4-25cm, Code39(4mil): 4-10cm,

QR code(15mil): 2-170cm

Interface| Bluetooth: HID, BLE, SPP
Transmission Distance| 50M(Open Yard)
Error Rate| 1/5million
Cable Length| 1M
Material| ABS+PC
Working Voltage| DC5V±5%
Operating Current| Working Current ≥250mA
Lithium Battery| 3000mAh
Shock Resistance| Withstands multiple times 1.5m drops to concrete
Operating Temperature| -20℃ – 50℃
Storage Temperature| -40℃~70℃
Relative Humidity| 0% ~95% RH(Non-condensing)

Factory Default

€RD9FF55.

Bluetooth Mode

%%SpecCodeAA|
%%SpecCodeAB|
%%SpecCodeAC
---|---|---

HID Mode Pairing

%%SpecCode99

Bluetooth pairing/disconnection (valid only in HID mode)

HID Mode Pairing Process:

1. Scan Bluetooth HID mode → scan Bluetooth pairing (the blue light flashes quickly);
2. The device searches for the Bluetooth BarCode Scanner HID → click to connect (there will be a “didi” prompt sound if the connection is successful) or press and hold the button ③ for more than 3 seconds to enter the pairing mode;
3. You can output the data on the notepad or other text on the device. If you need to pair with another device, first scan for Bluetooth disconnection (there will be a “dididi prompt” when disconnected), then scan for Bluetooth pairing, and repeat the above pairing process.

BLE mode pairing process:

1. Scan the Bluetooth BLE mode (the blue light flashes quickly) → the device searches for Bluetooth BarCode Scanner BLE;
2. Click to connect (there will be a “didi” prompt tone if the connection is successful) SPP mode.

SPP pairing process:

1. Scan Bluetooth SPP mode (the blue light flashes quickly) → the device searches for Bluetooth BarCode Scanner SPP;
2. Click to connect (there will be a “didi” prompt sound if the connection is successful).

Keyboard ON or OFF in IOS device

%%SpecCode1A

Keyboard ON in IOS device

Note: Scan above QR code to enable or disable Keyboard in the IOS device.

Scan Mode

End Character

Keyboard Caps Lock Control

Sleep Time

Transmit Speed

Keyboard Language

%%SpecCode43

| %%SpecCode4D| %%SpecCode4F
---|---|---|---

Image Reverse

UPC-A to EAN13

Prefix Setting

Eg , Add prefix “A”

Step 1, Scan below code to enter into “add prefix ”
Step 2, Scan below code to add “prefix”
Step 3, Scan the numeric code correspond to “A” , the ASCII value of A in Hexadecimal is “4” “1” Refer to Appendix 1 & Appendix 2
Step 4, Scan “save” code to save(refer to Appendix 1)

Suffix Setting

Note: The method of adding the suffix is the same as the prefix.

Appendix 1:

€S0000FF.

Appendix 2 :

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>