DXRACER King Series Gaming Chair Instruction Manual
- June 12, 2024
- DXRACER
Table of Contents
DXRACER King Series Gaming Chair
Product Information
The product is a chair designed for seating purposes. It is not intended to be used as a ladder, wheelchair, or for any other unintended activity. The chair has armrests that are meant to support your arms while sitting correctly on the chair and should not be used for sitting or any other unintended activity. The chair has a maximum weight limit of 150 kg and is classified as Type C according to EN 1335-1:2020 standards.
Product Usage Instructions
- To prevent damage to the product, do not wear clothes with rivets, studs, or other sharp objects while using the chair.
- Avoid wearing clothes that may cause discoloration of the chair while using it.
- To prevent the chair from tipping over, do not use the reclining function at the same time as the lifting function.
- Ensure that the tilt mechanism is locked when fully unfolded.
- For safety purposes, perform smooth and controlled movements while using any function of the chair to ensure the safety of the product, people, animals, and the environment.
- When sitting on the chair, avoid sitting on the edge as it may cause the chair to tip over.
- Always sit with your back against the chair and avoid sitting in a reversed position.
- When the chair is fully unfolded, keep both feet on the ground to prevent tipping.
- Be cautious not to trap your hand or fingers in the gaps when using the reclining function of the chair.
- Avoid applying excessive force when adjusting the height of the chair by pulling the handle.
- When using the chair’s wheels, ensure that the surrounding area is clean and free of obstacles.
Note: The above instructions are provided in multiple languages. Please refer to the corresponding language section for the relevant instructions.
EXPLODED VIEW
PARTS LIST
INSTRUCTION
FUNCTIONS
MEASUREMENTS
For all warranty related issues, please contact the reseller from whom the product was purchased. The reseller will assist you with your inquiry. —————————————————————————-
WARNING!
For your own safety and warranty eligibility, make sure to carefully follow
the safety instructions below:
- The assembly instructions must be followed closely to prevent danger or malfunctions.
- Children must be supervised by an adult while assembling or operating the product.
- Do not, under any circumstance, ingest any liquids or materials from the product.
- Make sure to thoroughly wash your hands after handling any parts with oil or grease.
- The product is designed for the use of one person at a time.
- When placing yourself in the chair, do so carefully to avoid applying excessive pressure to the gas lift cylinder, which could result in exceeding the set maximum load capacity.
- Whilst using the chair, refrain from using clothing with rivets, sequins or other sharp objects attached, to avoid damage on the product.
- Whilst using the chair, refrain from using clothing which may cause the chair to be discolored.
- To prevent the chair from falling or tipping over, refrain from using the recline function whilst operating the tilt function.
- Make sure that the tilt mechanism is locked when fully reclining the chair.
- While operating any function of the chair, always use smooth and controlled movements to ensure the safety of the product, humans and animals, as well as the surrounding environment.
- The armrests of the chair are merely intended to support your arms while seated in the chair properly, and are not built for being seated upon or any other unintended activity.
- If too much weight is applied upon the front edge of the seat, you may run the risk of falling over. Therefore, do not sit upon the edge of the seat.
- Make sure to only be seated with the back of your body towards the chair, and not reversed.
- The product is merely intended and designed to be used as a chair. Do not use it as a step stool, wheelchair or for any other unintended activity.
- When fully reclining the chair, it is highly recommended that both feet remain on the ground to prevent the chair from tipping or falling over. Sudden or excessive force on the backrest could also result in the same consequence.
- Do not use excessive force or over-extend when operating the recline function.
- When operating the recline function of the chair, please mind the gap to prevent your hand or fingers from getting caught.
- When adjusting the height of the chair by pulling the handle, do not use excessive force.
- While operating the casters of the chair, be sure that your surroundings are clear, to avoid rolling into or over anything/anyone. The casters of the chair are only intended to be used on floors that may not be damaged by the casters. To prevent the floor being damaged by the casters, please use a protective carpet between the casters and the floor.
- To ensure the safety of the product, all parts and functions are to be checked on a monthly basis.
- In the event of parts being loose, missing or damaged, contact the reseller from whom it was purchased. Avoid using the product until the situation has been resolved.
- Warning! Only trained personnel may replace or repair seat height adjustment components with energy accumulators.
- Do not disassemble or in any way tamper with the gas lift cylinder. Unauthorized tampering with the gas lift cylinder may result in explosive related danger and injury.
- Do not use spare parts or accessories from third party suppliers.
- Avoid leaving the product in direct sun light for a long period of time, to prevent color fading, or cracks in the plastic material.
- When cleaning the product, please use a gentle cloth. Do not scrub excessively. Avoid using strong detergents.
- Approved limit for gas lift 150 kg.
- Type C (EN 1335-1:2020).
Copyright © 2023 by DXRacer Europe
All rights reserved. No part of this publication may be reproduced, copied,
modified, distributed, or transmitted in any form or by any means, including
photocopying, recording, or other electronic or mechanical methods, without
the prior written permission of the publisher, except in the case of brief
quotations embodied in critical reviews and certain other noncommercial uses
permitted by copyright law. For permission requests, write to DXRacer Europe,
addressed “Attention: Copyright Permissions” at the address below.
ABOUT COMPANY
- DXRacer – European Headquarter
- DXRacer Europe, Johanneslundsvägen 2, 194 61 Upplands Väsby, SWEDEN
- info@dxracer-europe.com
- www.dxracer-europe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>