HI-ND OD5517-5301 Outdoor Totem Installation Guide
- June 12, 2024
- HI-ND
Table of Contents
HI-ND OD5517-5301 Outdoor Totem
Product Information
Part Number | OD5517-5301-02 |
---|---|
Description | Outdoor totem for Samsung OH55A-S |
This product is an outdoor totem specifically designed for the Samsung OH55A-S screen. It allows for secure installation of the screen in an outdoor environment. The totem features a top metal list and a second metal list which are used to attach the screen. It also includes a bottom hatch that can be opened with a key, providing access to the interior of the totem. Additionally, the totem has an IP classified box where an external computer and router can be placed.
Product Usage Instructions
- Ensure that there are two persons available for the installation process.
- Attach the top metal list to the screen using the two M8 screws included in the package.
- Attach the second metal list to the screen using the two M8 screws included in the package.
- Securely attach the metal lists to the top and bottom of the screen.
- With the help of two persons, attach the screen to the totem.
- Confirm that the screen is properly attached.
- Use M6 screws to tighten the metal list to the totem.
- Use M6 screws to tighten the metal list to the top of the totem.
- Ensure that the screen is securely attached.
- Open the bottom hatch using the provided key.
- If required, place an IP classified box for an external computer and router inside the totem.
- Refer to the image of the bottom plate for the power and network cable inlet, located in the middle hole (75mm x 105mm).
- The installation process is now complete.
Part no : OD5517-5301-02
Description: Outdoor totem for Samsung OH55A-S
Installation
| 1.Number of persons two (2)
---|---
| 2.Attach the top metal list to the screen with two (2) M8 screws included in
the package
| 3. Attach the second metal list to the screen with two (2) M8 screws
included in the package
| 4.Metal list attached to the top and bottom of the screen.
---|---
| 5. Attach the screen to the totem. Two (2) persons needed
| 6. Screen attached
---|---
| 7. Now use M6 screws to tighten the metal list to the totem
| 8. Use M6 screws to tighten the metal list to the top of the totem
| 9. Screen is now attached
---|---
| 10. The bottom hatch is opened with a key. Included in the shipment
| 11. An IP classified box for external computer and router can be placed
inside the totem
---|---
| 12. Image of bottom plate. Inlet for power and network cable in the middle
hole (75mm x 105mm)
| Finished!
MANUFACTURER
HI-ND Sweden AB
Mekanikervägen 9A, 146 33 Tullinge
Email: info@hi-nd.se