Montana Fire Pits Adjustable Pressure Propane Regulator Instructions
- June 12, 2024
- Montana Fire Pits
Table of Contents
Adjustable Pressure Propane Regulator Instructions
Propane Regulator + Hose + Fitting
For Liquid Propane only not for use with natural gas
Quick Setup Guide
Adjustable Pressure Propane Regulator
IMPORTANT: Some fittings require pipe sealant and all connections require leak testing. If you’re unfamiliar with installing gas components, contact a plumber or licensed gas professional to do the installation for you. You may smell propane for several minutes after burning even if there are no leaks. If the smell continues over time, test each connection again for leaks.
-
Apply Gas Pipe Sealant to the threads on the 3/4″ side
-
Connect the 3/4″ end to the key valve fuel inlet and tighten with a crescent wrench
-
Turn the adjustment knob counter-clockwise 3-5 full rotations to decrease the pressure before lighting the fire
-
Connect the regulator end to your propane tank
• No pipe sealant on this connection
• This connection is reverse-threaded
• Turn counter-clockwise to tighten
• Snug it up tight with a wrench -
Connect the hose to the flared end of the fitting
• The flared side (smaller end) of the fitting does not require pipe sealant
• Hand-tighten, then snug up with a wrench
• Test each connection for leaks
MONTANAFIREPITS.COM
( 8 3 3 ) 2 2 8 – 5 2 4 4
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>