ASHLEY A8010297 Floxville Floor Mirror Instruction Manual
- June 12, 2024
- Ashley
Table of Contents
ASHLEY A8010297 Floxville Floor Mirror
Product Information
Note: Your unit may look different in appearance from the one shown in
the illustrations on this instruction sheet.
Signature Design by AshleyTM
All Rights Reserved. April 2022
Product Usage Instructions
- Refer to the provided illustrations on the instruction sheet for visual guidance on how to assemble and use the unit.
- Contact RTAparts@ashleyfurniture.com or visit www.ashleyfurniture.parts for any inquiries or assistance related to the product.
- For further support, call 1-844-966-0809.
IMPORTANT SAFETY NOTICE
READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Be sure to check all packing materials carefully for small parts may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors.
- Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products that have electric cords (lamps, lights, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves-use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
A MALIRESTO PROPERTY FO LOW ASSEMBLY INSTRUCTIONS. PROPERTY ESSEMBLE FEE
PRODUCT: S R PROPERLY OGSUT A PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN
THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!
NOTE: HARDWARE IS STORED AT THE SIDE OF THE HEADBOARD
WARNING!
The use of the included tipping restraint may reduce, but not eliminate, the
risk of furniture tipping over. Follow the instructions on the plastic bag for
proper installation.