QIAO HYB-02 Flame Essential Oil Diffuser User Manual
- June 12, 2024
- QIAO
Table of Contents
QIAO HYB-02 Flame Essential Oil Diffuser
Product Information
The product is a transmitter that requires mobile configurations. It is designed to comply with FCC RF exposure compliance requirements. The transmitter should be used with antennas that are installed to provide a separation distance of at least 20 cm from all persons. It should not be co- located or operated in conjunction with any other antenna or transmitter.
Product Usage Instructions
- Ensure that the product is used only in mobile configurations.
- Install the antennas with a separation distance of at least 20 cm from all persons.
- Do not co-locate or operate the transmitter with any other antenna or transmitter.
SAFETY INFORMATION
Warning
- Do not submerge the base in water,all electronic components are not waterproof.
- Do not pull the power cord when unplugging the adapter.
- Do not convert or repair this product on your own.
Guidelines
- Stop using if power cable is damaged or not working properly.
- Power cords must be replaced with professional soft wire, if damaged.
- Please keep this product away from children.
- Please keep all power cords away from moisture while in use.
- Please use 24V 0.8A Adapter.
Tips
- Please do not wrap power cords over the product to avoid damage.
- Please use clean and maintain this product under supervision by a guardian to who do not have a full capacity or relevant knowledge (including children).
- Maximum water tank capacity is 500ml (16.9 oz).Do not fill the tank over the water line. It will affect the misting vapor process or damage the product.
- Please use the original charging cable that comes with the box for the best result. Using any replacement charging cables may affect the misting vapor process.
- Please use pure water for the best lifespan of this product Chemicals in tap water could cause malfunction.
- There will be some noise when the motor is running.
PRODUCT DETAILS
- Cool Mist Vent
- Flame Light
- Block water mist
- LED fog lamp
- Water Tank
- Water Line
- Left button
- Middle button
- Right button
- LED Profile lights
- Audio
HOW TO USE BLUETOOTH
Bluetooth pairing
-
Long press the right button,
Bluetooth pairing and removal, upon successful pairing, there will be a prompt sound and the left indicator light will flash.
Successful connection -
Then turn on the Bluetooth function of your mobile phone, click to select the”PCXC600″ device name in the Bluetooth device: automatically enter the pairing, after the pairing connection is successful, there will be a prompt tone.
OPERATIONAL INSTRUCTION
- a. On/Off
- b. Light mode
- c. Night light
- d. Fog light
- e. Brightness+
- f. Sleep and Bluetooth
- g. Natural sound
- h. Volume+
- i. Volume-
- j. Brightness-
- k. Timing switch
- a. On/Off
- b. Light mode
- c. Fog light+
- d. Brightness+
- e. Fog light-
- f. Timing switch
- g. Brightness-
BASIC PARAMETER
- Model: HYB-02
- Electric Current: 500mA~800 mA
- Watt: 20W
- Water Tank Capacity: 500ml (16.9 oz)
- Mist Capacity: 20ml/h
- Origin: Shenzhen China
- Weight: 600g
- Voltage: DC24V/ 0.8A
- Dimension: 200 x 100 × 136 (mm)
- Material: ABS/ Silica/ PCBA/PC
- Compliance:
- GB4706. 1-2005
- GB4706. 48-2009
Electronic Device Hazardous Substances Declaration
The hazardous substances and any corresponding components shown in this
table will not cause any harm to human and the environment under normal use of
the product. This table is to provide relevant instructions to consumers and
recycling practitioners, for proper disposal reference.
INCLUDED IN THIS BOX
- Essential Oil Diffuser: × 1
- Power Adapter: × 1
- Power Cord: × 1
- Remote control: × 1
- User Manual: × 1
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:(1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radiofrequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, whichcanbedetermined by turning the equipment
off and on, the user is encouraged to try to correct the interferencebyoneor
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver disconnected.
- Consult the dealer or an experienced radio/TV technician for help important announcements.
Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only mobile configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>