BECHARA LEME Panel TV Shelves User Guide
- June 12, 2024
- BECHARA
Table of Contents
BECHARA LEME Panel TV Shelves
PARTS IDENTIFICATION
REAR VIEW
FINAL APPEARANCE
Description
| N.° ID | Description | Description | Quantity |
|---|---|---|---|
| 01 | Left Central Panel | 1602 x 450 x 12 | 1 |
| 02 | Right Central Panel | 1602 x 450 x 12 | 1 |
| 03 | Side Panel | 1602 x 300 x 12 | 2 |
| 04 | Top Shelf | 1350 x 160 x 15 | 1 |
| 05 | Bottom Shelf | 900 x 260 x 25 | 1 |
| 06 | Top Panel | 1350 x 238 x 15 | 1 |
| 07 | Rear Column | 1597 x 60 x 15 | 2 |
| 08 | Rear Bar | 1050 x 124 x 15 | 2 |
| 09 | Front Frame | 1352 x 70 x 15 | 1 |
| 10 | Side Frame | 238 x 54 x 15 | 2 |
IMPORTANT! The required or recommended tools for assembly are not included and not supplied with the product.
- Simple and Phillips screwdriver.
- Simple hammer.
- Measuring tape.
- Electric screwdriver with Philips tips.
Read carefully and consider all instructions before and during the assembly and keep this product guide for future reference. Two people are required to assembly and install this product. Curved walls or uneven surfaces are not recommended or may not allow the installation of the Leme Panel, because it leads to incorrect fixation and can cause warping of the parts and the detachment and fall of the panel. Before starting the installation, check all the conditions of the wall, notably regarding resistance to weight and the existence and position of hydraulic, electrical or gas lines, avoiding damage to these structures when running holes. The Móveis Bechara is not responsible for problems caused by inexperience, inadequacy or failure to follow due recommendations in the assembly and installation of their products by third parties. The Leme Panel is adequate for fixing LCD/LED/ Smart TV up to 60 inches with weight up to 25 kg, since observing the dimensional and installing specifications of the televisions. The supports and bolts for TV are not included in the product Leme Panel. The holes that will be executed on the panel for fixing the TV or other purpose are the responsibility of the customer and the installer or assembler, not leaving it to them the right to require from the Móveis Bechara the replacement product, in whole or in part, by damage from these operations or where possible exchanging equipment would entail the need for additional holes or leave visible the holes already executed. To clean, use dry cloth or slightly moistened with water. Do not use chemical and abrasives products and do not expose the furniture to direct sunlight and humidity. Recommended maximum weights: TV up to 25 kg; and more 25kg evenly distributed in the shelf. Never use anypart of the panel as a support or as a step to climb the panel itself or the wall. FAILURE TO FOLLOW THE RECOMMENDATIONS FOR ASSEMBLY, INSTALLATION, AND USE MAY CAUSE FUNCTIONALITY PROBLEMS AND THE LOSS OF THE WARRANTY CONDITIONS.
ACCESSORY AND BOLTS
- Bolt 5,0 x 50mm flat head phs.
- Bolt 4,5 x 25mm flat head phs
- Bolt 3,5 x 12mm flange head phs.
- Glue sachet
- Plastic Bushin 8mm for wall.
- Bolt 5,0 × 60mm flange head phs.
- Plastic Cover 040mm.
- Junction/Steel plate 13 × 50mm.
- Plastic bracket.
- Metal bracket.
IMPORTANT! Check the measures of the bolts on the scale or with a measuring tape before applying them in parts.
STEP 1: FIXING THE REAR COLUMN (07) ON THE PANELS (03) AND FIXING THE REAR BAR (08) IN THE PANELS (01). (02) AND (03):
- Line the floor with the cardboard and thefoam mantle of the packing to protect the parts and arrange the Panels (01), (02) and (03) with the rear face upwards, correctly checking the position of the each as holes and as the drawing.
- Joining the Panels (01), (02) and (03) correctly aligning its edges and fix them with the steel plates (H) and bolts 3,5 × 12mm (C).
- Fix the Rear Columns (07), positioning them correctly in the Panels (03) with bolts 4,5 x 25mm (B).
- Fix the Rear Bar (08), positioning them currectly in the Panels (01), (02) and (03) with bolts 4,5 x 25mm (b).
- Fixing distance of the Bar (08) with the Panels (01), (02) and (03).
STEP 2: FIXING FRAME (09) AND (10) ON THE TOP (06):
- Fix the Frames (09) and (10) on the Top (06) with angular support (I), metal angle bracket (J) and 3.5 x 12mm screw (C).
STEP 3: FIX THE SHELVES (04), (05) AND TOP (06) ON THE PANELS (01), (02) AND (03):
- Fix the Shelves (04), (05) and Top (06) on the Panels (01 ), (02) and (03) with 5.0 x 50mm screws (A).
STEP 2
STEP 5
CONTACT
- Indústria de Móveis
- Bechara Nassar Eireli.
- Av. Bechara Nassar Frange, 113
- Jd. Brasilia,
- Tanabi, São Paulo – Brasil
- CEP 15170-000
- Telefones: (17) 3272 9900 (17) 3272 9919
- www.moveisbechara.com.br.