BOSCH BVMS Video Management System User Guide

: June 12, 2024
: Bosch

Table of Contents

BVMS Video Management System
BVMS 11.1.1 System Manager package 1.1
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Invented for life
BVMS Video Management System
User Guide BOSCH BVMS Video Management System Release Notes
BVMS 11.1.1 SystemManager package 1.1
Date: 22-Jun-2023

BVMS Video Management System

Document History

Date	Version	Changes
22.06.2023	1	Initial release

BVMS 11.1.1 System Manager package 1.1

The BVMS_11.1.1_SystemManager_package_1.1.zip is an update release of software package BVMS_11.1.1_SystemManager_package_1.0.zip for the DIVAR IP System Manager application. It is used to choose DIVAR IP all-in-one 4000 and DIVAR IP all-in-one 6000 operation mode and install corresponding software applications. When used together with the DIVAR IP System Manager application version 2.0.0 and higher, it is also suitable to choose DIVAR IP all-in-one 7000 (DIP-73xx) operation mode and install
corresponding software applications for a factory-default system, including one equipped with Boschsupplied 18TB capacity drives.
Operation modes:

Full video recording and management system, including BVMS, VRM and iSCSI storage.
Pure video recording system, including VRM and iSCSI storage.
iSCSI storage expansion for a BVMS or VRM system.

2.1 Installation prerequisites and operation notes

The system must be connected to an active network during initial boot and package installation.
DIVAR IP all-in-one 4000/6000: DIVAR IP System Manager application shall be installed and started. It is recommended to use the DIVAR IP System Manager application version 2.0.0 or higher. Please refer to the DIVAR IP all-in-one 4000 / 6000 systems Installation Manuals and User Manuals for detailed instructions.
DIVAR IP all-in-one 7000(DIP-73xx): DIVAR IP System Manager application version 2 .0.0 or higher shall be installed and started. For further details please refer to the DIVAR IP System Manager 2.0.0 Release notes and to the Application Note “DIVAR IP all‑in‑one Remote Portal connectivity” in the product catalogue.
To download the BVMS 11.1.1 System Manager package 1.1, go to https://downloadstore.boschsecurity.com/. Then, under the Software tab, select BVMS Appliances from the list and click Select.
Locate the BVMS_11.1.1_SystemManager_package_1.1.zip file from the list of all available software packages, and save it to a storage medium such as a USB stick. Unzip the files on the storage medium. Do not change the folder structure of the unzipped files.
Connect the storage medium to your DIVAR IP all-in-one system and follow Initial system setup and Choosing operation mode instructions in the DIVAR IP all-in-one 4000 / 6000 systems Installation Manuals and User Manuals, and in the Application Note “DIVAR IP all‑in‑one Remote Portal connectivity”.

2.2 New features

Updated to use together with the DIVAR IP System Manager application minimum version 2.0.0, to choose DIVAR IP all-in-one 7000 (DIP-73xx) operation mode and install corresponding software applications for a factory-default system, including one equipped with Bosch-supplied 18TB capacity drives.
Updated Video Streaming Gateway component to version 8.1.1.2

2.3 Fixed issues

Fixed – with the initial release of software package
BVMS_11.1.1_SystemManager_package_1.0.zip it might happen that an operation mode cannot be installed on a DIVAR IP all-in-one 7000 (DIP-73xx) system, equipped with Bosch-supplied 18TB capacity drives, due to long LUN formatting time on these high-capacity drives.

2.4 Known limitations and issues

The DIVAR IP all-in-one system must be connected to an active network during initial boot and package installation.
DIVAR IP System Manager application version 1.5.0 may become non-responsive while updating the user interface data, if many packages are installed. This issue is fixed in the version 2.0.0. Please make sure you update DIVAR IP System Manager application to version 2.0.0 or higher.

2.5 Subcomponent software versions