boAt Rockerz Bliss Wireless Neckband User Manual

ROCKERZ
BLISS
USER MANUAL

Thank you for choosing boAt Rockerz Bliss. This manual is meant to guide you through the functionality of the wireless earphone neckband. Knowledge of Bluetooth end device connection is essential for the usage of the headset. Therefore, we strongly advi:zhe that this manual is thoroughly read before use, and referred to in times of clifficultyb so that you can always be easily gurded towards the shores of musical bliss.

PACKAGE CONTENTS

• 1 x Rocker( Bliss
• 1 x USB Type C charging cable
• 3 x Pairs of additional earmuffs (Small & Large)
•  1 x Manual
• 1 x Catalogue
•  1 x Warranty Card

PRODUCT OVERVIEW

TO PAIR WUTH BLUETOOTH

1.  When switched off, press and hold the MFB (*Multifunction Button) for 3 seconds to switch on the wireless sarphones and put them Into pairing mode. The sarphones automatically enter pairing mode with a voice prompt, the blue & red LEDs flach alternatively toindicats the same.
2. Open Blustooth functionality on your media devics and search for “Rockerz Bliss” from the lict of available devices.
3. Choose “Rockerz Bliss” from the list and If asked for a passcode, enter the pairing code “0000″ to establish Blustooth connectivity.
4. Onca succassfully connected, The blue LED flashes once every 10 seconds to Indicate the same.

Note: The wireless neckband automatically trns off I there s ro pairng establhed in 5 minite:

SPECIFICATIONS

portion of Swipe (5 sec) simultaneously Red and blue LED stays for 2 sec to indicate the same
BEAST” Mode| Long press mfb for 3 seconds to activate BEAST’ mode for low latency
Voice Assistant| Triple press MFB.
Note: It the voice assistant doesn’t get triggered then the functionality has to be hest enabled 1) nut media device
Spatial Bionic Sound (Powered by Dirac Virtuo)| Double press MFB to turn on/off Spatial Bionic Sound. Long tone confirms Spatial Bionic Sound on and short tone confirms Spatial Bionic Sound off

BEAST'” MODE
Long press MFB for 3 seconds to activate BEAST'” Mode for low latency Made for the Garners – By Garners, BEAST'” Modereduces the latency significantly and improves the overall gaming experience.
ENx”‘ TECH
Our ENx'” tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx'” as the mic is equipped with the same and activated by default. Deliver your voice without interruptions anywhere – traffic, railway stations. airports. work space; literally anywhere!
SPATIAL BIONIC SOUND (POWERED BY DIRAC VIRTUO)
Dirac Virtuo provides Spatial Audio sound, which has been created to turn any audio content into an immersive listening experience for the user. With a more accurate soundstage and superior sound quality. the combination of Rockerz Bliss with Dirac Virtuo allows users to enjoy a more balanced sound as well as expanded soundscape. To enter Into the Spatial mode, simply double press MFB, To switch off Spatial sound, double press the MFB once again.
TO CHARGE
Use the provided USB Type C charging cable to charge the earphones through either laptop / adaptor/ powerbank.
(1) Low Battery: When the remaining battery is below 20%, there is a ‘Battery Low’ prompt every few minutes and red LED quickly flashes every few seconds to indicate the same (2) Charging: Solid red LED indicates that the earphone is being charged (please note that the earphone cannot / should not be turned on while charging). (3) Fully charged: Red LED turns off to indicate the same
SPECIFICATIONS

SAFETY CAUTIONS

• Please don’t dismantle the product in any way or remove the product’s battery by yourself, a; this can lead to a firs or electrical breakdown Any maintenance or servicing of the earphone; should be done only through a qualified service provider/manufacturer
• Please clean the earphones with the utmost of care with only a damp soft cloth. if cleaning is required. Pease do not use any oily volatile liquid In addition, ensure that the earphones are kept away from extremely hot or cold substances.
• Any damage to the earphones that is NOT a manufacturing issue will make the products warranty null and void.
• Do not use earphones when it is unsafe to be wearing them, such as while operating a vehicle, crossing a street, or during any activity where tuft awareness of your surroundings is required.
• To avoid damage to your hearing, make sure that the volume on your music player is at an appropriate level when you are putting on the earphone. Exposure to any noise levels at or above 85 dB can gradually coed to a loss of hearing.

CHARGING NORMS & PRECAUTIONARY GUIDELINES: –

1. Charger/Brick/Adapter SV/2A
2. Cable/Wire: Standard Cable (35 strands ci0 lOrnm diameter/ strand) Any other accessory can be paired up with the product as tong as the specifications are as per above norms.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>