Vidar ThermTec Thermal Imaging Sight Instruction Manual
- June 12, 2024
- Vidar
Table of Contents
Vidar ThermTec Thermal Imaging Sight
Vidar Upgrade Manual
| Section | Content |
|---|---|
| 1. Physical connection | Please use a magnetic cable to connect the device and |
computer
as shown in the picture below.
2. Copy the firmware to the device directory| Copy the firmware file to the
device directory.
3. Device Upgrade| To upgrade the device, follow these steps:
1. Go to Menu
2. Select System
3. Choose Update
4. Firmware version confirmation| To check the device version, follow these
steps:
1. Go to Menu
2. Select System
3. Choose Reset
Physical connection
Please use magnetic cable to connect the device and computer as shown in the
picture below.
Copy the firmware to the device directory
Device Upgrade
Upgrade the device from following path:
【Menu】->【System】->【Update】
Firmware version confirmation
From the below path to check the device version is matched or not.
【Menu】->【System】->【Reset】
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>