DS18 EN8PLD Universal 2-Way Speaker Enclosures Owner’s Manual
- June 12, 2024
- DS18
Table of Contents
EN8PLD Universal 2-Way Speaker Enclosures
Owner’s Manual
OWNER’S MANUAL
EN8PLD
UNIVERSAL 2-WAY SPEAKER ENCLOSURES
WITH NXL-8/BK AND PRO-TW1L INCLUDED
For all elements
EN8PLD
UNIVERSAL 2-WAY SPEAKER ENCLOSURE WITH NXL-8/BK AND
PRO-TW1L INCLUDED
INTRODUCTION
If you’re looking to maximize your sound system, you may consider adding this
durable Polyethylene Enclosure by DS18. This enclosure includes one 8″
Waterproof Speaker with RGB LED lights (NXL-8BK) and one 3.8” Super bullet
tweeter with RGB LED lights (PRO-TW1L) that your stereo system deserves.
This enclosure comes in pairs (Left & Right) with a black textured finish. It
is universal and very easy to Install with mounting hardware and input cable
included in the box.
FEATURES:
- Pods sold as a set for left and right applications.
- Easy to install – all hardware and wiring included.
- OFC tinned wiring for more power handling and durability.
- 6 core 0.6M Input Wires for RGB Lighting and Speakers.
- Universal application on flat surfaces.
- Black OEM Finish
- Includes one set of 8” NXL-8BK waterproof speaker with RGB LED Lights.
- Includes one set of 3.8” PRO-TW1L super bullet tweeter with RGB LED Lights.
- Durable (PE) waterproof enclosure with UV Protection.
- Sealed type waterproof enclosure.
- Damping material for better speaker preformance.
WHAT’S IN THE BOX:
- Left & Right Speaker Enclosure with NXL-8BK and PRO-TW1L included.
- Mounting Hardware.
- 6 core wiring for each enclosure.
SPECIFICATIONS
GENERAL
Total Impedance …………………………………………………………. 4 OHM
Load Configuration ………………………………………………… Parallel
Input Wire………………………………………………………………… 6 Core (Spk+RGB) OFC Tinned (2ft / 0.6m)
Sold as Pair or Single ……………………………………………….. Pairs (Left & Right)
WOOFER SPECIFICATIONS
Speaker Type | Size …………………………………………………. 8″ Waterproof Coaxial with RGB LED
Lights
RMS Power Handling ……………………………………………………………………..125W
MAX Power Handling ………………………………………………………………………..375W
Sensitivity (1w/1m) ……………………………………………………………………….. 93dB
Frequency Response …………………………………………………………………….35Hz-20KHz
Recommended Hi Pass Crossover …………………………………………. 50Hz
Voice Coil Diameter …………………………………………………………….1.2” / 30.5 mm
Voice Coil Former Material …………………………………………Kapton / Kaptón
Winding Material …………………………………………….CCAW
Cone Material …………………………….Injection Molded Polypropylene + UV Compliant
Surround Material……………………………………….Butyl (Rubber)
Basket Material ……………………………………………………. High Temp Injection Molded Composite
with UV Protection coating
Grill Type…………………………………………………………Injection Molded Composite ASA with UV
Protection coating
Magnet Material ……………………………….Ferrite+Neodymium
Magnet Weight………………………………………………………………….24 Oz + 0.32 Oz
TWEETER SPECIFICATIONS
Speaker Type | Size…………………………………………. 3.8″ Super Bullet with RGB LED
RMS Power Handling ………………………………………………………………………………… 60W
MAX Power Handling ……………………………………………………………………………….120W
Sensitivity (1w/1m) ……………………………………………………………………………………..103dB
Frequency Response …………………………………………………………………. 3.5KHz-20KHz
Recommended Hi Pass Crossover………………………………………… 4KHz
Voice Coil Diameter ………………………………………………………………….1” / 25.4mm
Voice Coil Former Material ………………………………………….Kapton
Winding Material …………………………………………………………………….CCA
Diaphragm Material …………………………………………………………….. Aluminum
Magnet Material ……………………………………………………………………..Ferrite Y30
Magnet Weight …………………………………………………………..8 Oz
BOX SPECIFICATIONS
Box Type …………………………………………………………………… Sealed / Sellado
Box Material …………………………………………………………Polyethylene (PE)
Finish Material ……………………………………………………………….Matte Black
UV Protection ……………………………………………………………….Yes, 100% Stable
Waterproof Rating……………………………………………………………. IP65
MEASUREMENT
Overall Height ……………………………………………………………………………9″ / 230mm
Overall Width…………………………………………………………………………..13.24″ / 336.4mm
Overall Depth …………………………………………………………………………… 5.28″ / 134mm
CONNECTION OPTIONS
- If you have an LED Control Module (LED-BTC), Connect as Shown in the Following Diagram:
- To connect without LED Control Module (LED-BTC), Connect as Shown in the Following Diagram:
• Black wire”BR” connected to battery Positive (+) 12V
• White Color Light “R”; “B” and “G” connected to battery Negative (-)
• Green Color Light “G” connected to battery Negative (-)
• Red Color Light “R” connected to battery Negative (-)
• Blue Color Light “B” connected to battery Negative (-)
• Purple Color Light “R” and “B” connected to battery Negative (-)
• Yellow Color Light”R” and “G” connected to battery Negative (-)
• Cyan Color Light “B” and “G” connected to battery Negative (-)
DIMENSIONS
FOR MORE INFORMATION
PLEASE VISIT
DS18.COM
WE LIKE IT LOUK