SIMBA 7FT Strike Multi Games Table Instruction Manual

SIMBA 7FT Strike Multi Games Table

Product Information

The 7ft Multi Games Table is a versatile gaming table that incorporates three different games: Air Hockey, Pool, and Table Tennis. It comes with various parts and accessories for each game, including a pool table, table tennis surface, legs, leg end panels, leg side panels, latches, leg levelers, support brace, bolts, plastic covers, screws, plastic barrel nuts, nuts, washers, axle sleeves, wood plugs, billiard ball, triangle rack, chalk, cue sticks, plastic brush, hockey strikers, hockey pucks, table tennis paddles, table tennis balls, table tennis net, and an Allen key tool.

Product Usage Instructions

Step 1: Before assembling the pool table, count all the parts and quantities according to the parts list provided in the manual.
Step 2: Assemble the pool table using the following steps:

1. Refer to Figure 1 and attach the leg end panels (P4) and leg side panels (P5) to the pool table (P3).
2. Refer to Figure 2 and attach the leg levelers (H4) to the pool table (P3).
3. Refer to Figure 3 and attach the support brace (H10) to the pool table (P3) using the provided screws.
4. Refer to Figure 4 and attach the rotation shaft to the pool table (P1) using the provided bolts (H5 and H7).
5. Refer to Figure 5 and attach the leg (P6) to the pool table (P2) using the provided screws (H8).
6. Refer to Figure 6 and attach the leg side panel (P8) and leg (P2) to the pool table (P3) using the provided screws (H9).
7. Refer to Figure 7 and attach the hockey strikers (A9) and hockey pucks (A10) to the air hockey surface.

Note: Please follow the warnings in the manual, as two adults are needed for assembling the pool table. Ideally, four adults are required for lifting.
Please keep these instructions for future reference. Adult assembly required. This table is not a toy & is intended for use by or under the supervision of adults.

Tool required: Philips Screwdriver (not included), Standard (flat head) Screwdriver (not included), Allen Key (included)

• Philips Screwdriver-not included
• Standard( flat head ) Screwdriver-not included
• Allen Key-included

Note: electric screwdrivers may be helpful during assembly however please set a low torque & use extreme caution.

Assembly Tips

1. Read the entire manual before starting the assembly.
2. Some drawings or images in the manual may not exactly match your product.
3. Ensure you have a second adult to assist with assembly, and ideally, four adults for lifting.
4. Keep all packing materials until the parts have been inspected and the table is assembled.

Remember to keep these instructions for future reference. Adult assembly is required, and this table is not a toy but intended for use by or under the supervision of adults.
Make sure you understand the following before you begin to assemble your game table.

Unpack the pieces

1. Lay the box a flat surface (the floor). You may want this near your area of assembly.
2. Unpack the boxes & parts bags. inspect & count the parts. The parts identifier page can be uses to record your results.

PARTS IDENTIFIER

ASSEMBLY INSTRUCTIONS

WARNING: TWO ADULTS NEEDED ASSEMBLE POOL TABLE

Instructions before assembly:
Count all the parts and quantities according to the parts list to prepare the assembly below.

WARNING: TWO ADULTS NEEDED ASSEMBLE POOL TABLE

WARNING: YOU WILL NEED A SECOND ADULT TO ASSIST WITH THIS ASSEMBLY (INDEALLY 4 ADULTS NEEDED FOR LIFTING)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>