TURPONE KPO-PZ300 12 Inch Gas Pizza Oven Instruction Manual

TURPONE KPO-PZ300 12 Inch Gas Pizza Oven

Product Information

• Product Name: Gas Pizza Oven
• Model Number: KN-20220901 US-V01
• Intended Use: Outdoor use only

Safety Instructions:

• Do not store or use gasoline or other flammable vapors or liquids near the appliance.
• A gas cylinder not connected for use should not be stored near the appliance.
• This appliance must only be used in an above-ground open-air situation with natural ventilation.
• Do not operate the appliance indoors or with the cover on.
• Place articles or flammable materials away from the appliance.
• Do not store chemicals or spray aerosols near the appliance.

Product Usage Instructions

1. Before using the appliance, read the instruction booklet carefully.
2. Ensure the gas cylinder valve is in the OFF position.
3. Inspect the valve connections, port, and regulator before connecting the liquid propane gas cylinder.
4. To connect the liquid propane gas cylinder, follow these steps:
5. Make sure the burner valve is in the OFF position.
6. Screw the regulator assembly onto the cylinder valve by turning the quick coupling nut clockwise.
7. To disconnect the liquid propane gas cylinder, follow these steps:
8. Turn the oven burner valve OFF and ensure the oven is cool.
9. Turn the liquid propane cylinder valve OFF by turning clockwise until it stops.
10. Detach the regulator assembly from the cylinder valve by turning the quick coupling nut counterclockwise.
11. Place the dust cap provided with the cylinder valve onto the cylinder valve outlet when the cylinder is not in use.
12. If you smell gas or hear a hissing sound, follow these steps:
13. Shut off the gas to the appliance.
14. Extinguish any open flame.
15. If the odor continues, keep away from the appliance and immediately call your fire department.
16. If there is a strong gas smell or excessive humming sound, follow these steps:
17. Call your fire department if the odor continues or if you have a fire you cannot extinguish, but do not call near the gas cylinder to avoid creating sparks
18. To purge air from the gas line or reset the regulator excess gas flow device, follow the instructions provided in the manual.

IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING
THE APPLIANCE! READ THE ASSEMBLY INSTRUCTIONS IN THIS MANUAL BEFORE REMOVING THE CONTENTS OF THIS CARTON

FOR YOUR SAFETY

If you smell gas:

1. Shut off the gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance and immediately call your fire department Failure to follow these instructions could result in fire or explosion which could cause property damage, personal injury or death.

FOR YOUR SAFETY

1. Do not store or use gasoline or other flammable vapours or liquids in the vicinity of this or any other appliance.
2. A gas cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
   • This instruction manual contains important information necessary for proper assembly and safe use of the appliance.
   • Read and follow all warming and instruction before assembly and using the appliance.
   • Follow all warming and instruction before assembling and using the appliance.
   • Keep this manual for future reference.
   • For outdoor use only. Do not use indoors.
   • Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death.
   • WARNING! This pizza oven will become very hot, do not move it during operation.
   • Warning: Accessible parts may be very hot. Keep children and pets away
   • Never leave a lighted pizza oven unattended.
   • Only use the pizza oven on a level surface.
   • Turn off the gas supply at the gas cylinder after use.
   • Any modification of the appliance may be dangerous and will void the warranty.
   • Installer to leave instructions with the consumer and consumer to retain them for future reference.
   • Please ensure all packaging and transit protection materials are removed prior to using the pizza oven.
   • Do not use the pizza oven in a confined or enclosed space such as a garage, carport, tent, marquee, to avoid risk of fire and the accumulation of smoke and fumes.
   • The appliance is not intended for commercial use.

SAFETY INSTRUCTIONS

IMPORTANT: READ THE ASSEMBLY INSTRUCTIONS IN THIS MANUAL BEFORE REMOVING THE CONTENTS OF THIS CARTON

IMPORTANT SAFETY INSTRUCTIONS

This appliance must only be used in an above ground open-air situation with natural ventilation, without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural convection

• This pizza oven is an outdoor appliance only. Under no circumstances should it be use indoors.
• READ ALL OPERATING INSTRUCTION BEFORE LIGHTING
• Do not perform any servicing on the pizza oven yourself. This includes internal adjustment of the regulator and gas valves. Servicing can only be carried out by authorized technicians.
• When gas cylinder is replaced or reconnected, check for leaks.
• Do not store chemicals or flammable materials near this appliance.
• Unsupervised children should not be near a pizza oven while cooking or during warm up or cool down.
• People with flammable clothing such as nylon etc. should keep well away from the pizza oven when it is operating.
• Do not leave food unattended on the pizza oven.
• In case of fat fire, turn gas cylinder off.
• Turn all gas valves off including gas cylinder after use.
• Never leave burners on high for more than 10 minutes unless cooking. If the burner makes hissing sound when lit, it may be burning inside. Turn burner off, allow it to cool and try again.
• Do not allow build-up of unburned gas.
• The appliance is recommended to use on an outdoor incombustible bench top. Do not use under overhead construction. Minimum clearance from side and back of unit to combustible construction: 24″(600mm) from sides and 24″(600mm) from back.
• The supporting bench top must not be tipping as this might cause serious hazard.
• DO NOT OPERATE THIS APPLIANCE BEFORE READING THE INSTRUCTION BOOKLET
• DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE
• DO NOT STORE CHEMICALS OR FLAMMABLE MATERIALS OR SPRAY AEROSOLS NEAR THIS APPLIANCE
• DO NOT OPERATE THIS APPLIANCE INDOORS
• DO NOT ENCLOSE THIS APPLIANCE
• DO NOT LIGHT OR OPERATE WITH THE COVER ON (COVER NOT INCLUDED)

WARNING

A strong gas smell or the hissing sound of gas indicates a serious problem with your gas pizza oven or the gas cylinder. Failure to immediately follow the steps listed below could cause serious bodily injury, death, or property damage.

• Shut off gas supply to the gas pizza oven.
• Turn the control knobs to OFF position.
• Put out any flame with a class B fire extinguisher.
• Get away from the gas cylinder.
• Do not try to fix the problem yourself.

If odour continues or you have a fire you cannot extinguish, call your fire department. Do not call near the gas cylinder because your telephone is an electrical device and could create a spark resulting in fire and/or explosion.
NOTE: The normal flow of gas through the regulator and hose assembly can create a humming sound. A low volume of sound is perfectly normal and will not interfere with operation of the pizza oven. If humming sound is loud and excessive you may need to purge air from the gas line or reset the regulator excess gas flow device. This purging procedure should be done every time a new gas cylinder is connected\ to your pizza oven.

OTHER CONSIDERATIONS

• Strong winds and low temperatures can affect the heating and performance of your gas pizza oven so factor in these elements when positioning your pizza oven outdoors for cooking.
• Never use your gas pizza oven in a garage, porch, shed, breezeway, or any other enclosed area.
• Do not obstruct the flow of ventilation air around the gas pizza oven housing. This gas pizza oven is not intended to be installed in or on recreational vehicles and/or boats.

INSTALLATION COMPLIANCE

• This appliance must be installed in accordance with the installation instructions provided by the manufacturer, local gas fitting regulations, municipal building codes and any other relevant statutory regulations
• The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58; or Natural Gas and Propane Installation Code, CSA B149.1; Propane Storage and Handling, CSA B149.2; or the Standard for Recreational Vehicles, ANSI A119.2/NFPA 1192; and Recreational Vehicle Code, CSA Z240 RV Series, as applicable.

WARNING CARBON MONOXIDE HAZARD
Danger of carbon monoxide poisoning – NEVER light this product or let it smoulder or cool down in confined spaces.

GAS CYLINDER SAFETY INFORMATION

GAS TYPE
Propane(LPG）ONLY

WARNING

• Please always keep the gas bottle in upright position.
• The size for 20 lbs LP gas cylinder is 12.2 inches in diameter and 17.9 inches tall.
• If the appliance is not in use, the gas must be turned off at the supply cylinder.
• The cylinder used must include a collar to protect the cylinder valve.
• The minimum distance for the appliance and the 20lb gas tank is 40 inches apart.

CONNECTING THE LIQUID PROPANE GAS CYLINDER

1. To connect the liquid propane gas cylinder:
2. The cylinder valve should be in OFF position.
3. Make sure the burner valve is in OFF position.
4. Inspect the valve connections, port and regulator assembly. Remove debris and inspect the hose for damage.
5. When connecting the regulator assembly to the valve, use your hand to tighten the nut clockwise until it stops. Use of a wrench could damage the quick coupling nut and result in a hazardous situation.
6. Open the cylinder valve fully by turning the valve counterclockwise.
7. Before lighting the oven, use a soap and water solution to check all connections for leaks.
8. If a leak is found, turn the cylinder valve OFF, and do not use the oven until local liquid propane dealer can make repairs.

DISCONNECTING THE LIQUID PROPANE GAS CYLINDER

1. Turn the oven burner valve OFF and make sure the oven is cool.
2. Turn the liquid propane cylinder valve OFF by turning clockwise until it stops.
3. Detach the regulator assembly from the cylinder valve by turning the quick coupling nut counterclockwise.
4. Place dust cap for cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other type of caps or plugs may result in leakage of propane.

HOSE AND REGULATOR REPLACEMENT
In the case of a problem arising with the hose and regulator please contact your pizza oven supplier for a list of approved replacement parts.
GAS CYLINDER STORAGE
If the appliance is not in use, the gas must be turned off at the supply cylinder. Do not store a spare LP gas cylinder under or near this appliance, never fill the cylinder beyond 80% full, and if not followed exactly, a fire causing death or serious injury may occur. Storage of an appliance indoors is permissible only if the cylinder is disconnected and removed from the appliance. Store gas cylinder in well ventilated area out of reach of children and shall not be stored in a building, garage, or any other enclosed area.

SAFETY WHEN LEAKAGE OF GAS IS SUSPECTED

• Turn off the pizza oven’s gas supply and disconnect the regulator from the gas cylinder.
• Wipe out any open flames and remove possible ignition sources. If the smell of gas is sustained, please contact your gas supplier or the fire department immediately.
• If the gas cylinder appears to be the source of smell/leakage, place this outdoor with good ventilation and away from possible ignition sources.

CONNECTING THE LIQUID PROPANE GAS CYLINDER
This gas fitting is counterclockwise. Make sure that the tank is completely switched off and screw the regulator as far as possible into the gas tank valve.

NOTE.:

• The cylinder supply system must be arranged for vapor withdrawal.
• The cylinder used, if exceed of 2.2 lb(1.00 kg) propane capacity, must include a collar to protect the cylinder valve.

LEAK TESTING

Please check for gas leakage the first time you are connecting the pizza oven to the gas cylinder, and also each time you are replacing the gas cylinder or disconnect/reconnecting any fittings. Inspect the hose before each use. To check for gas leakage, turn on the gas supply at the gas cylinder, but do not switch on the burners inside the pizza oven. The gas hose will now be filled with gas. Then pour water with soap over all connections. Any gas leakage should result in bubbles within 20 seconds. If a gas leakage is detected, tighten the connection. If the gas leakage persist, contact your supplier or place of purchase. As an alternative, you may use a gas leak detector, following the manufacturer’s instructions, available at all major pizza oven retailers. This provides an easier way to check for gas leaks DON’T USE NAKED FLAME FOR LOCATING GAS LEAKS. IF A LEAK PERSISTS, CALL AN AUTHORISED PERSON

1. Add soap and water to spray bottle or soapy water with brush
2. Turn off gas valves

Turn gas cylinder on

1. Spray or apply soapy water on gas connections

2. If leak is present, bubbles will appear

3. LIGHTING PROCEDURE

4. Connect the gas cylinder to the barbecue following the instructions supplied with the regulator. 2. Turn the control knobs to the ‘OFF’ position.

5. . Turn ‘ON’ the gas supply at the cylinder or
   regulator switch following the regulatorconnection and operating instructions. Check the cylinder to regulator connection and hose to barbecue hose inlet connection for leakage using soapy water. Any leakage will show as bubbles in the area of the leak. If leak is found, do not use the barbecue. Consult your gas or barbecue supplier for advice.

6. To light the burner, push down and turn the control knob anti-clockwise to the 90°position  (full rate position). An audible click will beheard, this should light the burner. Check that the burner is lit, and keep knob down for 5 second to allow the thermocouple on work and maintain the gas flow open. If the burner has not lit, repeat this process.

7. If the burner has not lit after two attempts, turn ‘OFF’ the gas tap, and wait 5 minutes before retrying the ignition sequence.

8. When the burner has lit, the burner rate can be adjusted by push down and turn the knob anticlockwise to any position between the full and low-rate position.

9. To turn ‘OFF’ the pizza oven, turn the cylinder valve handle or regulator switch to the ‘OFF’ position by following the regulator instructions. Once the burners have extinguished turn the control knobs to the ‘OFF’ position.

TURNING OFF THE PIZZA OVEN
When turning off the pizza oven, close the gas supply from the gas cylinder first; this will allow the gas remaining in the hose to evaporate. This will only require a few seconds. The burners can then be switched off.
Note: ‘Blowback’ is a situation where the flame burns inside the burner, towards the front, recognized by a sharp roaring sound coming from the burner. It is not dangerous unless allowed to persist. If this occurs, simply turn the burner off, wait a few seconds, and then relight.

TO LIGHT WITH A MATCH

1.  If burner will not light after several attempts using the control knob, the burner may be lit with a match.
2. If you have already attempted to light the burner using the control knob, wait 5 minutes for any gas to dissipate.
3. . Insert a match into the matchstick holder, ignite the match and insert through the oven opening to the burner.
4. . Push and turn the control knob to HI slowly, the burner should ignite immediately.
5. If the burner does not light within seconds, turn the control knob OFF and wait 5 minutes and try again.

CONTROLLING THE FLAMES

The knobs have three basic positions. You can achieve any flame height between low and high by rotating the knob between these positions.

PIZZA OVEN MAINTENANCE

• Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.
• Not obstructing the flow of combustion and ventilation air.
• Keep the ventilation opening(s) of cylinder enclosure free and clear from debris.
• Visually checking burner flames, with pictorial representations.
• Cleaning appliance, including special surface, with recommended cleaning agents, if necessary.
• Check and cleaning burner/venturi tubes for insects and insect nests, A clogged tube can lead to a fire beneath the appliance.
• Store the pizza oven out of direct sunlight and indoors where possible and when storing for extended periods of time
• It should not be exposed to harsh weather conditions such as snow, heavy rain and strong winds.
• Wait for pizza oven to cool completely before moving.
• The outer shell of pizza oven may fade over time and through use. This will not affect performance.

STONE BAKING BOARD MAINTANCE

• DO NOT use the stone over an open flame
• Avoid extreme temperature change to the stone. DO NOT place frozen foods on a hot stone
• The stone is fragile and can break if bumped or dropped
• The stone is very hot during use and stays hot for a long time after use.
• DO NOT cool the stone with water when the stone is hot
• After cleaning the stone with water, please dry the stone before use. This can be done in a conventional oven at 60°C (140°F) for 2 hours.

IMPORTANT INFORMATION

• This product is for outdoor use only.
• Do not use indoors.
• Do not use below ground level.
• Do not store gas cylinders below ground level.
• Gas is heavier than air so if a leak occurs the gas will collect at a low level and could ignite in the presence of a flame or spark .
• Do not store or use gas cylinders on their side as this could allow liquid gas into the supply pipes with serious consequences.
• Leak test your pizza oven before each use. Leak test the hose connections each time you reconnect the gas cylinder.
• Always turn off the gas at the cylinder when not in use.
• Open the door of the frame to inspect the hose before each use. If there is evidence of excessive abrasion or wear, or the hose is cut it must be replaced prior to the pizza oven being put into operation.
• Only use hose supplied from the manufacturer.

You must have the correct gas cylinder, regulatorand hose for pizza oven to operate safely and efficiently. Use of an incorrect gas cylinder, regulator or hose is dangerous and will void the warranty on this product.

**** 5024615

| Turpone Group Inc.

6832 rue Jarry East, Montreal, Quebec, Canada H1P 1W3 CANADA

---|---
PRODUCT NAME| 12INCH GAS PIZZA OVEN
MODEL NO.| KPO-PZ300
TYPE OF GAS| PROPANE(LPG)
GASS PRESSURE| 2.74KPa
INPUT RATE(MAIN)| 12000BTU/HR

ASSEMBLY INSTRUCTIONS

ASSEMBLY TIPS

• Remove all contents from packaging, and make sure all the parts are present before attempting to assemble!
• Tighten all bolt connections by hand first.
• When the pizza oven is fully assembled, re-tighten the screws, nuts and bolts by using a wrench and screw driver.

TOOLS REQUIRED

• Philips screwdriver
• Pliers or adjustable spanner

Parts list in the packaging

• STEP 1
  Install the 2x round feet to the gas pizza oven body

• STEP 2
  Place 4x battery into the battery box its proper position.
  Note: The 4 batteries (size: AA, 1.5V）are not supplied along this packaging.

• STEP 3
  Fix the rubber support feet on to the pizza oven body.

• STEP 4
  Place the pizza plate in the pizza oven in its proper position.

• STEP 5
  Follow the safety instruction to connect with the gas, and enjoy your pizza. Before ignite the pizza oven, make sure the leak test was done.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>