boAt Airdopes 207 Premium Wireless Earbuds User Manual

boAt Airdopes 207 Premium Wireless Earbuds

AIRDOPES 207

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 207 Please consider this manual as your guiding map towards the unparalleled shores of auditory realm Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTENTS

• 1x Pair of TWS Earbuds
• 1x Warranty Card
• 2 1x Charging Case
• 1x Catalogue
• 3 1x Type-C Charging Cable
• 1x FAQ Card
• 4 1x User Manual

OVERVIEW

1. CTC (Capacitive Touch Control)

POWER ON (FIRST TIME USER)

• Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy our IP™ (Insta Wake N° Pair) technology, the earbuds power on automatically, get connected and enter the connection mode OR Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds
• Step 2: After powering on, the earbuds enter the Connection Modo, indicated by alternate red and blue LED flashes on primary earbud and blue LED flashes once every 5 seconds on the secondary earbud

CONNECTION MODE

• Step 3: Turn on the Bluetooth functionality on your phone/media device and scan
• Step 4: Search for *Airdopes 207′ and pair accordingly. Congratulations! Your earbuds are now connected successfully via Bluetooth.

Note:

• Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure.
• Airdopes 207 remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range.

QUICK GUIDE ON FUNCTIONALITIES

CHARGING THE EARBUDS

• Step 1: Please insert the earbuds back inside the charging case in correct orientation and close the lid
• Step 2: in charging status, the red LED turns on for 2 secs when case lid gets opened. LED stays off when the lid stays closed.
• Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power, and the red LED stays turned off.

Note
Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.

CHARGING THE CASE

Step. To charge the case, plug one end of the provided cable into the case and connect the other end to a computer wall adapter/ powerbank, etc.

Remaining case battery led indications

Case LED indication when Earbuds are getting charged from the case

• This is to indicate the earbud getting charged from the case (whon case lid gets closed)
• CYAN for 5 seconds to indicate LEFT bud is charging from theCase
• PURPLE for 5 seconds to indicate RIGHT bud is charging from the Case
• If both are property charged, BLUE for 5 seconds

BASIC FUNCTIONS

• Voice Assistant: Long touch either TC for 3 seconds to activate default voice assistant
• Answer: Single tap the CTC on either earbud to answer an incoming call
• Hang Up / Reject Call: Double tap the CTC on either earbud to end / reject call
• Play/Pause Music: Single tap either earbud’s CTC to play or pause music
• Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song
• Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song

Note: Volume can only be controlled via the media device

BEAST™ MODE

• Triple tap the left CTC to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt. Triple tap the left CTC once again, to turn it off and rotur to standard
• Music Mode
• Made for the Gamers – By Gamers, BEAST™’ Mode reduces the latency significantly and improves the overall gaming experience.

VOICE ASSISTANT

• Step 1: Long touch the CTC on either earbud for 3 seconds to activate the smart voico assistant
• Step 2. The respective voice assistant screen pops up and you may place your commands at easo

Tips: You may try out the following commands

• What is the weather?
• Play a song
• Set a reminder

Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.

ENx™ TECH

• Our ENx tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENX” as the quad mics are equipped with the same and activated by default.
• Deliver your voice without interruptions anywhere – traffic, railway stations, airports, work space; literaily anywhere!

SMART POWER OFF

• Step 1. After Usage, remove both the earbuds from your ears
• Stop 2 ; Place the earbuds back into the charging caso in correct orientation and close the lid
  The earbuds automatically switch off (and enter charging mode),

MANUAL POWER OFF

• Step 1 : Long touch either CTCs for 5 seconds to manually power off the earbuds
• Step 2. Once the earbuds get turned off, place them back inside the caso and clote the lid

FACTORY RESET

• Perform the factory reset in case you fool any difficulty while operating your Airdopes.

“NOTE: Bafore performing reset, clear “Airdopes 207” from pairing device history by forgetting device

• Step 1 Take out the earbuds from the charging case, and long touch the CTC for 5 seconds on both the earbuds,
• Step 2. Place the earbuds Inside the Case (Earbuds will automatically power-off in the charging case).
• Stop 3 : Close the lid, wait for 5 seconds. After succossful factory  reset, Red LED blinks quickly 5 times on Case and Earbuds.
• Step 4 ; Take out the earbuds from the charging caso and perform a fresh connection.
  Note: To complete the factory reset, all of the above steps should be performed,

Congratulations! Your Airdopes 207 has been Reset

SPECIFICATIONS

WARNING

• Please follow the instructions to operate.
• Please don’t use the earbuds in extreme temperatures.
• Please don’t use the product near water. Please keep the product away from heat sources, as the heat may damage it.
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing & extend the ear-buds’ service life.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>