boAt 161 Pro Wireless Gaming Earbuds User Manual
- June 13, 2024
- Boat
Table of Contents
AIRDOPES 161 PRO
User Manual
AIRDOPES 161 PRO
Enjoy listening to your favorite tunes hassle-free with your personal pair of
boAt Airdopes 161 Pro.
Please consider this manual as your guiding map to navigate the unparalleled
shores of musical bliss. Knowledge of Bluetooth and device connectivity is
essential for steering this boAt. Therefore, we strongly recommend that this
manual is read thoroughly. Further, you can refer to it at times when you face
difficulties.
PACKAGE CONTENTS
- lx Pair of TWS Earbucl;
- 2x Pahr of Extra Earmuffs-°,
- 1x Type-C Charging Cable
- lx User Manual
- 1 x ‘Warranty Card
- 1x Catalogue
- 1x FAQ Card
- 1x Charging Case
OVERVIEW
- C T C (Capacitive Touch Control) / Power Button
POWER ON (FIRST TIME USER):
Step | To switch the earbuds on (Smart Power On), simply open the hd of the
charging case (when earbuds are inside). Courtesy our [WP (insta Wake N’ Pair)
technology, the earbuds power on automatically, get connected and enter the
connection mode. oR
Long touch the CTC (Capacitive Touch Control) on either the right earbud or
the left earbud for 3-4 seconds to manually power on the earbuds.
Step 2: Once powered on, the earbuds enter the Connection Mode, indicated by
white LED flashes on the earbuds three times in a row.
CONNECTION MODE:
Step 3: Turn on the Bluetooth functionality on your phone/media device to
start scanning.
Step 4. Search for ‘Airdopes 161 Pro’ and pair effortlessly.
Congratulations! Your earbuds are now connected to your device successfully
via Bluetooth
Note :
- Pairing mode lasts for 5 minutes. If the pairing duration is missed, you need to reconnect the earbuds and follow all the steps mentioned above.
- Airdopes 161 Pro remembers previously connected devices for your ease; once switched on. the earbuds will automatically reconnect to the previously connected devices when in the working range.
MONO (SINGLE EARBUD) MODE
Step 1: Please note that both the earbuds can be used In Mono mode. Use
Smart/Manual Power On for switching on the desired Garbutt
Step 2: The selected earbud automatically enters the connection mode indicated
by three LED rashes
Step 3 Turn on Bluetooth on your phone/media device and search for ‘Airdopes
161 Pro’ to connect.
Notes.
- To switch to Stereo mode. simply take out the othor earbud from the case It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.
- You cannot skip tracks or return to the previous tracks In Mono (single earbud) mode
QUICK GLANCE ON FUNCTIONALITIES
3 Second:| | Long touch the left CTC for 2-3 seconds to activate voice
assistant
---|---|---
4 Seconds| Long touch either CTC for 3-4 seconds to manually power on
4 Seconds| Long touch both CTC: for 3.4 second: to manually power off
4 Seconds| Put the earbuds in the charging case Long touch the charging case
button for 10 second: to perform a factory reset
MULTI DEVICE CONNECTIVITY:
Step 1: Switch on the Bluetooth on your first phone/media device and search
for ‘Airdopes 161 Pro’. After the selection is done, the eee ee ee ame eu a Ee
ie}
Step 2. Turn off the Bluetooth function of your first phone/media Gevice. The
earbuds are ready to be paired again
Step 3 Now switch on the Bluetooth function on your second phone/medis device
Scan and select ‘Airdopes 161 Pro’ to Oras
Step 4 Switch on the Bluetooth of the first pnone/media device again. The
earbud is reconnected to the first phone/media device.
Step & Congratutations! Your earbuds are now connected to both your devices
successfully via Biuetooth.
Note: When in multi-device connection mode, long press the CTC on beth earbuds
for 2 seconds at the same time to reject a phone call.
CHARGING THE EARBUDS
Step 1:Please place the earbuds back inside the charging case in the correct
orientation and ciose the lid
Step 2: During charging whenever the hd gets closed. the LED gets switched on
to indicate thet both ieft and right earbuds are getting charged,
respectively.
Step 3: Once the eerbuds get fully charged, the charging cece automatically
switches off to save power.
Note
- Before using the earbuds for the first time. it is recommended to fully charge the earbuds Also, please keep the lid of the charging case closed while charging.
- If the battery dips below 20%, the LED flashes once ovary 10 seconds three times in a row along with a low battery voice prompt
CHARGING THE CASE:
Stop. To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/wall adapter/power bank, etc While the case is getting charged, the LED flashes continuously. Once the case is fully charged, it is indicated by a solid LED
VOICE ASSISTANT:
Step 1 Long touch the CTC on the left earbud for 2-3 seconds to activate the
smart voice assistant.
Step 2: The respective voice assistant screen pops up and you may speak your
commands easily
Tips. You may try out the following commands:
- What is the weather?
- Play a song
- Set a reminder
Note If toe voice assistant is not activated. then the functionality has to be first enabled from your media device settings.
BASIC FUNCTIONS:
- Voice Assistant. Long press the left CTC for 2-3 seconds to activate the voice assistant
- Answer Call_ Single tap the CTC on either earbud to answer an incoming call
- Hang Up / Reject Call. Double tap the CTC on either earbud to end/reject a call
- Play/Pause Music: Single tap either earbud’s CTC to play or pause music Next Track. When playing music, double tap the right earbud’s CTC to listen to the next song
- Previous Track. When playing music, double tap the left earbud’s CTC to return to the previous song Note
- Volume can only be controlled via the media device.
BEAST” MODE:
Long touch the CTC on your right earbud for 2.3 seconds to switch to Low
Latency mode, also known as BEAST'” Mode Once switched on, it is notified via
an audio prompt. To deactivate and return to boAt Signature Sound Mode, long
touch the night earbud CTC again for 2.3 seconds.
Made for the Garners
- By Garners, BEAST” Mode reduces the latency significantly and improves the overall gaming experience
ENX™ TECH
Our ENx”* (Environmental Noise Cancellation) tech algorithm cancels out the
background noise so that you can be heard crystal clear via voice calls. You
don’t have to activate ENx™ as the 2x mics are already equipped with the same
and activated by default,
Deliver your voice without interruptions no matter where you are – traffic,
raiiway stations, airports, workspace: literally anywhere!
SMART POWER OFF
Step 1: After usage, remove both the earbuds from your ears
Step 2. Place the earbuds back into the charging case in correct orientation
and close the lid
The earbuds automatically switch off (and enter charging mode).
MANUAL POWER OFF
Step 1 Long touch both CTCs for 3-4 seconds (one at a time) to manually power
off the earbuds.
Step 2: Once the earbuds are turned off, the white LED flashes thrice. Place
the earbuds inside the case and close the lid
FACTORY RESET
Perform a factory reset if you face difficulbes white operating your Airdopes.
“NOTE: Before you begin to reset. clear “Airdopes 161 Pro” from the
paired device history by forgetting device.
Step 1: Place both the earbuds back inside the charging case in correct
orientation and left the cese lid be remained open
Step 2: Long press the Reset Button on the charging case for up to 10 seconds
to do Factory reset. which gets indicated by the quickly flashing white LED on
the charging case
Step 3: Close the charging case lid,after a few seconds open the same for the
earbuds to automatically restart.
Congratulations! Your Airdopes 161 Pro has been reset!
SPECIFICATIONS
| Headphone Type | TWS |
|---|---|
| Bluetooth Version | VS 3 |
| Musk Playtime | Up to 10 HF15 per charge, Up to 40 HI |
| additional with Case (at 60% volume) | |
| Number of ENO’ Equipped Kilo | 2Mic |
| IWPs Tech | Yes |
| BEAST’ Mode | Yes: 60ms Low Latency |
| Transmission Range | 10 m |
| Driver Size | 10 mrn•2 |
| Supported Codec | AACJSBC |
| Frequency | 20 Hz-20 kHz |
| Battery | 380 mAh (Case): 35 mAi•2 (Earbuds) |
| Charging Time | 25 min-30 min (Earbuds); up to 1 5 HRS (Case) |
| Charging Interface | U58 Type-C |
| Water Resistance | IPXS |
WARNING
- Please follow the irr.tructions to operate
- Please don’t use the earbuds in extreme temperatures
- Please don’t use the product near water
- Please keep the product away from heat sources, as the heat may damage it
- Don’t jam the ports such as charger port, LED port. etc
- It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life
RECOMMENDATION:
The earbuds may start at 100rA volume level when first switched on. You can
adjust the volume to your preferred level using the volume controls on your
phone/media device.
Charging norms & Precautionary Guidelines: –
- Charger/Brick/Adapter 21 Cabl eiWire| : 5V 2A : Standard Cable (20 strands 00.10mm diameter/ strand)
Any other accessory can be paired up with the product as long as the specifications are as per above norms.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>