LEGO 71387 Adventures with Luigi Starter User Guide

October 26, 2023
Lego

LEGO-logo

LEGO 71387 Adventures with Luigi Starter

Syringe Pump Assembly with A2 Plus ...

Syringe Pump Assembly with A2 Plus Workbench | FreeCAD Assembly | A2 Plus Workbench |

LEGO-71387-Adventures-with-Luigi Starter-01 LEGO-71387-Adventures-with-Luigi Starter-02 LEGO-71387-Adventures-with-Luigi Starter-03 LEGO-71387-Adventures-with-Luigi Starter-04 LEGO-71387-Adventures-with-Luigi Starter-05 LEGO-71387-Adventures-with-Luigi Starter-06 LEGO-71387-Adventures-with-Luigi Starter-07 LEGO-71387-Adventures-with-Luigi Starter-08 LEGO-71387-Adventures-with-Luigi Starter-09

Important information about batteries
Never use different types of batteries together, or a combination of old and new batteries. Always remove the batteries if the product is not to be used for a long time or if the batteries have run down. Never use damaged batteries. Only use alkaline type batteries. Insert the batteries so that the poles are correctly positioned. Never attempt to recharge non-rechargeable batteries. Never short-circuit the battery holder.

Protect the environment by not disposing of this product with your household waste.
Check with your local authority for recycling advice and facilities.

LEGO-71387-Adventures-with-Luigi Starter-10

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.
    Caution : changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
    Operation is subject to the following two conditions:
  1.  This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The LEGO Group hereby declares that above product/products comply with the essential requirements and other relevant provisions of Directive 2014/53/EU. Complete declaration on WWW.LEGO.COM

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

Please retain the leaflet and packaging as they contain important information.

LEGO.com/productfeedback

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals