KleanTake Touchless Lid Dispenser User Guide

June 13, 2024
KleanTake

Touchless Lid Dispenser
User Guide

Touchless Lid Dispenser

Congratulations on your purchase! The KleanTake Touchless Lid Dispenser provides a solution to messy, unsanitary conditions at beverage stations. It will elevate the image of your facility, help improve hygiene, increase operational efficiency and help to reduce  waste. If you are unsatisfied with this product for any reason, please contact us via the methods below.

WARNING – READ ALL INSTRUCTIONS PRIOR TO OPERATION – SAVE THESE INSTRUCTIONS
Read entire manual before beginning assembly and before operating the unit. Save these instructions for future reference. Always place in a upright position for proper operation. Do not plug in cord or connect battery until product is fully assembled. Use only provided power supply. Do not contact moving parts. Only use attachments recommended or sold by the manufacturer. Do not use outdoors. This appliance can be used by children from the age of eight and above and persons with reduced physical, sensory, or  mental capabilities or lack of experience and knowledge if they have been given supervision or instruction on safe operation and potential hazards involved. For a cord- connected unit: To disconnect, turn all controls to the off (“O”) position, then remove plug  from outlet. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when not in use and before servicing or cleaning. For a battery unit: Use only the charger supplied by the manufacturer to recharge. Use only approved  batteries. If there are missing or damaged parts, contact help@webstaurantstore.com before assembly. Do not attempt to repair or service parts. Never operate unit in any way other than intended. Never operate unit if it was damaged, dropped, or has malfunctioning parts; contact our service department for support.

Operating Temperature 65°F–95°F (18°C–35°C) Unit Weight: 10lbs (4.5kg) Use only approved lids.
Commercial use only. Do not discard packaging until assembly is complete and unit is operational.KleanTake Touchless Lid Dispenser

  • This equipment complies with the Public Limits in accordance with the Council Reccommendation 1999/519/EC on the limitation of exposure of the general public to electro magnetic fields (0 Hz to 300 GHz).
  • A-weighted sound pressure level is below 70dB.
  • No user adjustable or serviceable components
  • No user maintenance required

WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer.
For more information, visit www.P65Warnings.ca.gov

CLEANING INSTRUCTIONS

INSPECT DAILY & KEEP CLEAN AND FREE OF DEBRIS
BASE UNIT (A) : Always unplug the unit / disconnect battery before inspection and/or cleaning. Never handle unit or cord with wet hands. Inspect and clean the unit periodically. Remove the Gravity Tube (B) and the four screws on the top cover to access and clean the internal components. Clean only with a dry cloth or air duster. Never submerge the unit, and do not use spray cleaners. This unit is not to be cleaned with a water jet or used in areas where a water jet could be used.
GRAVITY TUBE (B) : Always unplug the unit / disconnect battery & disconnect from base before inspection and/or cleaning. Inspect and clean periodically. Clean only with mild soap and a damp cloth. Do not use ammonia- based cleaners. Never handle the unit or plug with wet hands.

PRODUCT COMPONENTS

KleanTake Touchless Lid Dispenser - PRODUCT COMPONENTS

STEP 1

Remove all parts from packaging. DO NOT discard packaging until unit is assembled & operational. Do not use Slider Feet (C) if unit is in a designated fixed location on a counter. If the unit will be moved frequently, attach the Slider Feet (C) to the bottom of the Base Unit (A) as shown below by press fitting.

STEP 2

A : Lay the Gravity Tube (B) down on a flat surface. Leaving the plastic bag on, insert a package of lids with the bag open to the bottom into the Gravity Tube (B). B : Tip the Gravity Tube (B) up,open the lid bag at the bottom and gently pull the bag off from the top.
C: Place lid on top of the Gravity Tube (B) in the correct position.

STEP 3KleanTake Touchless Lid Dispenser - lids IMPORTANT: Ensure the lids are seated properly onto the gravity tube fingers (Fig. 1), and align the Gravity Tube (B) while lowering onto Base Unit (A).

STEP 4KleanTake Touchless Lid Dispenser - Gravity Once the Gravity Tube (B) is seated, you should hear a “click”. The Gravity Tube (B) release lever should be engaged, locking the parts in place. Ensure that the latch is fully engaged as shown in Fig. 2.

STEP 5

Place the unit in the desired location:
Wall Plug: plug the Electrical Cord (E) into the Base Unit (A) and connect to a standard outlet.KleanTake Touchless Lid Dispenser -
desiredBattery Power: Ensure the Battery (F) is fully charged on Battery Charger (G), and insert into the Base Unit (A).KleanTake
Touchless Lid Dispenser - Battery STEP 6

The blue indicator light should flash 7 times and remain lit. If indicator light does not remain lit, unplug the unit, inspect for obstructions, plug back in and restart. Test the unit by waving your hand in front of the sensor.KleanTake Touchless Lid Dispenser - indicator Optional:
Apply the chosen decal as shown.KleanTake Touchless Lid Dispenser -
decal

Warranty information

Select ServSense products are backed by a 1-year replacement warranty. Select ServSense products are warranted only to be free from defects in material and workmanship for a period of 1 year from the date of delivery. Proof of purchase is required to obtain  warranty coverage. This warranty is only valid to the original purchaser and only to products purchased in the contiguous United States.
Covered Products:
This warranty is valid on select ServSense branded products, including select products branded “KleanTake by ServSense”.

This Warranty Does Not Cover

  •  Products sold or used outside of the contiguous United States.
  • Products purchased used or sold by an unauthorized reseller.
  • Products that have been improperly installed, used, or maintained.
  • Products that have been subject to abuse, misuse, harsh chemical action, damage caused by flood,fire,orotheractsofGod.
  • Products missing proof of purchase.
  • Products damaged as part of shipping and handling.

If required by ServSense, customer shall return to ServSense for examination any failed product or part to confirm that the product has failed as a result of material or workmanship. ServSense at its option will replace the item at no charge or issue a credit memo  against future purchases.
This warranty provides the exclusive remedy against ServSense relating to ServSense products, whether in contract or in tort or under any other legal theory, and whether arising out of warranties, representations, instructions, installations or defects from any  cause. ServSense shall not be liable, under any legal theory, for loss of use, revenue or profit, or for substitute use or performance, or for incidental, indirect, or special or consequential damages or for any other loss of cost of similar type. The laws of some  jurisdictions limit or do not allow the disclaimer of consequential damages. If the laws of such a jurisdiction apply to any claim by or against ServSense, NO limitations and disclaimers contained here shall be the greatest extent permitted by law. ServSense shall  not be liable for more than the purchase price of the product, inclusive of applicable freight and sales tax.

To Make a Claim
To obtain warranty information or make a claim against this warranty, please contact the location where you purchased the product.
www.WebstaurantStore.com
Please use the online chat feature or email help@webstaurantstore.com. You will need your order number to make an inquiry or claim.
The Restaurant Store
Please contact your local store directly.
www.TheRestaurantStore.com
Please use the online chat feature or email help@therestaurantstore.com. You will need your order number to make an inquiry or claim.
Clark Food Service Equipment, PRO Marketplace, Hometown Provisions
Please contact your account manager directly. If you do not know your account manager, please call 717-392-7363 for CFSE and Pro Marketplace or 717-464-4165 for Hometown Provisions
Residential Use Warranty
Due to the commercial nature of ServSense, residential and non-commercial use is warranted for a period of 30 days from the date of delivery to the original purchaser.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals