VEEV Electronic Cigarette User Guide
- June 13, 2024
- VEEV
Table of Contents
VEEV Electronic Cigarette
TURN ON
Press and hold the Button for 3 seconds, then release; Status Lights will turn on slowly. You can use your VEEV ONE™ device.
CHANGE POD
You can change the VEEV ONE™ pod while your VEEV ONE™ device is turned on. When you insert the VEEV ONE™ pod, status lights will turn on slowly. You can use your VEEV ONE™ device.
TURN OFF
You can turn off the device by pressing the Button for 3 seconds.
VEEV ONE™ device
VEEV ONE™ Pod Button (sold separately)
**Type-C Charging Cable***
*For optimal charging performance, only use a manufacturer-approved Charging Cable (supplied in the box) and a certified AC Power Adaptor which you should obtain from a reputable source.
BATTERY LEVELS
Short press the Button, Status Lights will turn on to indicate battery level.
When battery is equal or lower than 1%, LED 1 blinks 5 times. Your VEEV ONE™ device can not be used until further charging
LOW LIQUID DETECTION
The upper white light will blink for 5 times. Your VEEV ONE™ device can not be used. Replace the VEEV ONE™ pod.
OVER PUFFING DETECTION
If the device blinks twice it means that you have puffed for longer than 5 seconds.
ERROR NOTIFICATION
The bottom light will blink red for 2 times to indicate error. Try to change the pod. If this happens again, reset your VEEV ONE™ device
RESET
Press the button for more than 10 seconds and release, all lights will blink white twice, confirming that the device has been reset.
CUSTOMER CARE
Customer service
Tel: 800 413 413
DISCOVER THE WORLD OF VEEV ONE™
Visit www.iqos.com or scan the QR code to discover our full range of flowers activate our unique variety of services and programmes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>