Amana NGD4655EW Gas Dryer User Guide
- June 13, 2024
- Amana
Table of Contents
Amana NGD4655EW Gas Dryer User Guide
Safety
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it (including cooking
oils).
Items containing foam, rubber, or plastic must be dried on a clothesline or by
using an Air Cycle.
Failure to follow these instructions can result in death or fire.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from dryer.
Do not dry anything that has ever had anything flammable on it (even after
washing).
Failure to follow these instructions can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.
Using Instructions
Step 1. Clean Lint Screen
Step 2. Load Clothes; then Close Door
Step 3. Select Cycle and Settings
Step 4. Press Start/Cancel
Button Descriptions
CYCLE CONTROL KNOB
Use the Cycle Control knob to select available cycles on your dryer. Turn the knob to select a cycle for your laundry load. See the online “Cycle Guide” for details.
Timed Dry
Will run the dryer for the specified time on the control. On models with a
selectable temperature knob, you may choose a setting based on the fabrics in
your load. Drying time and temperature will depend on your dryer model.
Sensor Dry/Automatic Dry
Senses moisture in the load or air temperature and shuts off when the load
reaches the selected dryness level. Gives the best drying in the shortest
time. Drying time will vary based on fabric type, load size, dryness setting,
and temperature setting.
TEMPERATURE
Select a drying temperature based on the fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting.
PUSH TO START/END OF CYCLE SIGNAL
The End of Cycle Signal produces an audible sound when the drying cycle is
finished. Promptly removing clothes at the end of the cycle reduces wrinkling.
Turn the End of Cycle Signal knob to select the desired setting (On or Off).
Press the Push To Start knob to start the dryer.
Not all features, cycles, and options are available on all models. Appearance
may vary.
Cycle Guide – Normal Cycle
Not all cycles and settings are available on all models.
Items to Dry: | Cycle: | Temperature: | Description: |
---|---|---|---|
Jeans, heavy work clothes, towels | Heavy Dry/Very DryNormalEnergy | ||
PreferredLess Dry | High | Automatic Dry/Sensor Dry cycles give the best drying |
in the shortest time. Drying time varies based on fabric type, load size, and
dryness setting.Select a drying temperature based on the fabrics in your load.
If you are unsure of the temperature to select for a load, select the lower
setting rather than the higher setting.
Work clothes, medium-weight fabrics, sheets| Medium
Casual, shirts, pants, lightweight items, synthetics, delicates, athleticwear|
Low
NOTE: Government Energy Certifications for the Gas and Electric models were based on the Timed Dry Cycle with the Maximum Drying Temperature Setting. The as-shipped defaults of AccuDry™, Automatic Dry, Auto Moisture Sensing or Sensor Dry, Normal or Energy Preferred Cycle, Low Heat, Wrinkle Guard or Wrinkle Prevent were not used.
NOTE: If loads do not seem as dry as you would like, select Heavy Dry/Very Dry the next time you dry a similar load. If loads seem drier than you like, select Less Dry the next time you dry a similar load.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.
For information on any of the following items, the full cycle guide, warranty, detailed product dimensions, or for complete instructions for use and installation, please visit https://owners.amana.com/owners/, or in Canada http://amanacanada.ca/owners/. This may save you the cost of a service call.
TROUBLESHOOTER | REGESTRATION | USER MANUALS |
---|---|---|
PARTS | SERVICE PLANS | FAQS |
Contact Us
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–866–616–2664
Amana Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
IMPORTANT: Retain this guide for future use.
Canada:
1–800–807–6777
Amana Brand Home Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
®/™ ©2023 Amana. All rights reserved. Used under license in Canada.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>