MINDEO MP719 Barcode Scanner User Guide

MINDEO MP719 Barcode Scanner

Note

A standard packing includes an imager, a USB cable.
Accessories include a RS232 cable, a 5V DC adaptor.
Use a piece of dry and soft cloth when cleaning the imager is in need.

Parts of the imager

Installing the cable

1. Refer to the below pictures, connect the host with the imager based on different cables;
2. Ensure that all connections are secure. If the installation is successful, the beeper will beep and LED will light.
   
   

Return default parameters and version information

Default value initialization

Firmware version list

Programming instruction and example

Two programming modes have been provided as bellows:

▶ Single-scan setting

Example: Enable UPC-A

Example: Enable UPC-A.
▶ Multiple-scan setting

Reading techniques

1. Press and hold the trigger, the imager projects a green LED square which allows positioning the barcode within its field of view, and turns on a white LED for illumination.
2. When reading a barcode, the green LED square will be smaller when the imager is closer to the barcode and larger when it is farther from the barcode. Please hold the imager at an appropriate distance from the barcode, and center the green LED square on the barcode.
3. On a successful barcode reading, the imager will beep once, and the green LED square and white LED will be turned off. Then the imager transmits barcode message to the host.

Note:

1. More details refer to User Manual.
2. For better readability, please print this document with laser printer.
3. Version: MP719_QG_EN_V1.1.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>