mujin MT-MWC01 Magsafe Wireless Charger User Guide

June 13, 2024
mujin

mujin-logo

mujin MT-MWC01 Magsafe Wireless Charger

The Components

mujin-MT-MWC01-Magsafe-Wireless-Charger-fig-1

  • Wireless Charger
  • User Guide
  • USB type C Cable

How to Connect

  • Read User Manual before using
  • Mujin magsafe wireless Charger and follow all instructions.
  • Connect an enclosed USB Type cable with a power adapter and Mujin magsafe wireless Charger.
  • Accurately matching the mobile device to the charging pad enables stable charging.
  • Make sure there is any metal or small objects between the charging device and the wireless charger. It may cause malfunction or errors.
  • Please use 15W or higher power adapter (Power Delivery, AFC,
  • QC2.0/3.0 or Higher compatible charger) to charge the device property.

Precautions

  • Do not strike, bend, drop, wet or apply excessive force to wireless charger. This may cause damages to the product
  • Do not disassemble or damage wireless charger. If the wireless charger has been disassembled by user, all warranties will be void
  • Before connecting and using the product with other devices, check if the device is compatible with the product.
  • It is recommended charging or use the wireless charger with ambient temperature ranging between 0℃~35 ℃. If the temperature is too high, the performance of the wireless charger may drop.

Safety Notes

  • Avoid using in the environment of high temperature, humidity, strong static electricity.
  • For your safety, please do not use a wet hand plug and unplug electrical appliance.
  • Avoid putting the charger in a place easily accessible to infants and children.
  • Do not use the product if is contaminated with water or dirt. This product does not support waterproofing.
  • Non professional personnel are not allowed to open and repair without authorization.

Warranty Policy

  • Mujin Tech Magsafe Wireless Charger covered by 1 year limited warranty from the original purchase date.
  • Pursuant to the terms of Mujin warranty policy. Mujin will provide proper warranty service if product fail under normal use.
  • For the products that ant our of warranty period hereunder, Mujin may refuse to provide any warranty service. If the product service it not available, please contact resellers.

Warranty Limitations

  • The warranty stated herein does not apply if any product failure caused by
  • Act of improper use such as prolonged exposure to
  • Malfunction of other equipment
  • Act of nature
  • Defects or damages from moving or dropping after purchase
  • Damaged connector or cable

Product Specification

MagSafe Wireless Charger

Model| MT-MWC01
Input rated| 5V≒2.0A, 9V≒2.0A, 12V≒2.0A
Output rated| 15W (MAX)
Dimension| 95(L) × 70(W) × 20(H)mm
Weight| 350g
Manufacturer| Mujin Tech., Ltd (Korea)

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may mot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changers or modification (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void your authority to operate equipment under FCC rules.

FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals