HILTI SIW 2­A12 Cordless Impact Wrench User Manual

HILTI SIW 2­A12 Cordless Impact Wrench

Product Information

• Product Name: SIW 2A12
• Language Options: Deutsch, English, Nederlands, Italiano, Dansk, Svenska, Norsk, Suomi, Eesti, Latviesu, Lietuvi, Polski, Cesky, Slovencina, Magyar, Slovenscina, Hrvatski, Srpski

Product Usage Instructions

1. Ensure that the product is used according to the instructions provided in this manual.
2. Pay attention to the symbols used in the manual and illustrations:
   • The “Bedienungsanleitung beachten” symbol indicates the need to follow the instructions provided in the manual.
   • “Umgang mit wiederverwertbaren Materialien” symbol indicates the proper handling of recyclable materials.
   • The “Li-Ionen Akku” symbol indicates the presence of a lithium-ion battery. Do not use the battery as a striking tool.
   • The “Gleichstrom” symbol indicates the use of direct current.
   • The “Bemessungsdrehzahl” symbol indicates the rated speed.
   • The “Rechts-/Linkslauf” symbol indicates the availability of forward and reverse rotation.
3. Ensure workplace safety by keeping the work area clean and well-lit.
4. Follow electrical safety guidelines and ensure proper connection of the power plug into the socket.
5. Pay attention to personal safety by being attentive and careful during product usage.
6. Service and repair of the product should only be done by qualified professionals.
7. Avoid direct eye contact with the LED light and do not shine it on other people’s faces to prevent glare.
8. Switch on the product only when it is in the working position.
9. Wait for the product to come to a complete stop before placing it down.
10. Product Description:
    • Akku-Ladezustandsanzeige (Battery charge level indicator)
    • Akku-Entriegelungstaste (Battery release button)
    • Steuerschalter (Control switch)
    • Werkzeugaufnahme (Tool holder)
11. Product delivery contents:
    • Not specified
12. Battery charge level indications:
    • 4 LED lights: 75% to 100% charge level
    • 3 LED lights: 50% to 75% charge level
    • 2 LED lights: 25% to 50% charge level
    • 1 LED light: 10% to 25% charge level
    • 1 blinking LED light: less than 10% charge level
13. Technical specifications:
    • Bemessungsspannung (Rated voltage): Not specified
    • Weight without battery according to EPTA Procedure 01: Not specified
    • Bemessungs-Leerlaufdrehzahl (Rated idle speed): Not specified
    • Operating temperature: Not specified
    • Storage temperature: Not specified

Original operating instructions

Information about the operating instructions

About these operating instructions

• Read these operating instructions before the product is used or operated for the first time. This is a prerequisite for safe, trouble-free handling and use of the product.
• Observe the safety instructions and warnings in these operating instruc-tions and on the product.
• Always keep the operating instructions with the product and make sure that the product is accompanied by these operating instructions only, when the product is given to other persons.

Explanation of symbols

Warnings

• Warnings alert persons to hazards that occur when handling or using the product. The following signal words are used:

DANGER!

• Draws attention to imminent danger that will lead to serious personal injury or fatality.

WARNING!

• Draws attention to a potential threat of danger that can lead to serious injury or fatality.

CAUTION

• Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the equipment or other property.

Symbols in the operating instructions

• The following symbols are used in these operating instructions:

| Comply with the operating instructions
---|---
| Instructions for use and other useful information
| Dealing with recyclable materials
| Do not dispose of electric equipment and batteries as household waste
| Hilti Li­ion battery
| Hilti charger

Symbols in illustrations
The following symbols are used in illustrations:

2| These numbers refer to the illustrations at the beginning of these

operating instructions.

---|---
3| The numbers in illustrations refer to important work steps or to components important for the work steps. In the text, the corresponding numbers draw attention to these work steps or components, e.g. (3).
11| Item reference numbers are used in the overview illustration and

refer to the numbers used in the key in the product overview section.

| This symbol is intended to draw your special attention to certain points for handling the product.

Product-dependent symbols

General symbols
Symbols used in relation to the product.

| The product supports near-field communication (NFC) technology

compatible with iOS and Android platforms.

---|---
| Li-ion battery
| Never use the battery as a striking tool.
---|---
| Do not drop the battery. Never use a battery that has suffered an

impact or is damaged in any other way.

| Direct current (DC)
N| Rated speed
| Forward / reverse

Product information

• products are designed for professional users and only trained, authorized personnel are permitted to operate, service, and maintain the products. This personnel must be specifically informed about the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
• The type designation and serial number are printed on the rating plate.
• Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product.

Product information

Declaration of conformity

• The manufacturer declares, on his sole responsibility, that the product described here complies with the applicable legislation and standards. A copy of the declaration of conformity can be found at the end of this documentation.

The technical documentation is filed here:

• Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany

Safety

General power tool safety warnings

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instruc- tions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130° C (265 °F) may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Safety warnings for screwdrivers and impact wrenches

• Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasten-ers contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Additional safety instructions

• Use the product and accessories only when they are in perfect working order.
• Never tamper with or modify the product or accessories in any way.
• Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed accessories are secure.
• Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some examples are: lead or lead-based paints; brick, concrete and other masonry products, natural stone and other products containing silicates; certain types of wood, such as oak, beech and chemically treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and bystanders by means of the hazard classification of the materials to be worked. Implement the necessary measures to restrict exposure to a safe level, for example by the use of a dust collection system or by the wearing of suitable respiratory protection. The general measures for reducing exposure include:
• working in an area that is well ventilated,
• avoidance of prolonged contact with dust,
• directing dust away from the face and body,
• wearing protective clothing and washing exposed areas of the skin with water and soap.
• Do not look directly into the light source (LEDs) of the power tool and do not aim the beam at other persons’ faces. Risk of dazzling or eye damage.
• Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
• Avoid touching rotating parts. Touching rotating parts, especially rotating accessory tools, may lead to injury.
• Wear protective gloves when changing the accessory tool. Touching the accessory tool can result in cuts and burns.
• Switch the product on only after you have brought it to the working position.
• Wait until the product has come to a complete stop before you lay it down.
• Take frequent breaks and do physical exercises to improve the blood circulation in your fingers. High vibration during long periods of work can lead to disorders of the blood vessels and nervous system in the fingers, hands and wrists.
• Before beginning work, check the working area for concealed electric cables or gas and water pipes. External metal parts of the product could give you an electric shock or cause an explosion if you accidentally damage an electric cable or a gas or water pipe.
• Secure the workpiece. Use clamps or a vice to hold the workpiece in position. The workpiece is thus held more securely than by hand and both hands remain free to operate the power tool.

Careful handling and use of batteries

• Comply with the following safety instructions for the safe handling and use of Li-ion batteries. Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
• Use only batteries that are in perfect working order.
• Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely harmful to health!
• Do not under any circumstances modify or tamper with batteries!
• Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C (176 °F).
• Never use or charge a battery that has suffered an impact or been damaged in any other way. Check your batteries regularly for signs of damage.
• Never use recycled or repaired batteries.
• Never use the battery or a battery-operated power tool as a striking tool.
• Never expose batteries to the direct rays of the sun, elevated tempera-ture, sparking, or open flame. This can lead to explosions.
• Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects. This can damage the battery and also cause material damage and personal injury.
• Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits, electric shock, burns, fire and explosions.
• Use only chargers and power tools approved for the specific battery type. Read and follow the relevant operating instructions.
• Do not use or store the battery in explosive environments.
• If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the document entitled “Instructions on safety and use for Hilti Li-ion batteries”.
• Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries. → page 30
• Read the instructions on the safety and use of Hilti Li-ion batteries that you can access by scanning the QR code at the end of these operating instructions.

Description

Product Overview

1. Forward / reverse switch
2. Grip
3. Light
4. Installation opening for accessories
5. Battery state of charge indicator
6. Battery release button
7. Control switch
8. The tool holder (3⁄8″ square drive)

Intended use

• The product described is a hand-held cordless impact wrench. It is designed for tightening and releasing nuts, bolts, anchors and wood screws.
• Use the cordless wrench only for applications that do not require a precise/ specified torque.
• For this product, use only Hilti lithiumion batteries of the B 12 series.
• Use only Hilti battery chargers of the C4/12 series for charging these batteries.

Items supplied

• Impact wrench, operating instructions
• Other system products approved for use with this product can be found at your local Hilti Store or at: www.hilti.group

Charge status display

• The charge status of the Liion battery is displayed after pressing one of the release buttons lightly (press only until slight resistance is felt).

• The battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds after releasing the control switch.

Technical data

Product information

Weight in accordance with EPTA procedure

01, without battery

| 0.75 kg
Rated speed under no load| 0 /min … 2,750 /min
Ambient temperature for operation| −17 ℃ … 60 ℃
Storage temperature| −20 ℃ … 70 ℃

Battery

operating instructions

Ambient temperature for operation| −17 ℃ … 60 ℃
Storage temperature| −20 ℃ … 40 ℃
Battery charging starting temperature| −10 ℃ … 45 ℃

Noise information and vibration values in accordance with EN 62841

• The sound pressure and vibration values given in these instructions were measured in accordance with a standardized test and can be used to compare one power tool with another. They can also be used for a preliminary assessment of exposure.
• The data given represent the main applications of the power tool. However, if the power tool is used for different applications, with different accessory tools, or is poorly maintained, the data can vary. This can significantly increase exposure over the total working period.
• An accurate estimation of exposure should also take into account the times when the power tool is switched off, or when it is running but not actually being used for a job. This can significantly reduce exposure over the total working period.
• Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for example: maintaining the power tool and accessory tools, keeping the hands warm, and organization of work patterns.

Noise information

Total vibration

Vibration emission value when tightening screws/bolts and nuts of the maximum

permitted size ah

| 5.3 m/s²
---|---
Uncertainty (vibration emission value) K| 1.5 m/s²

Preparations at the workplace

WARNING

• Risk of injury by inadvertent starting!
• Before inserting the battery, make sure that the product is switched off.
• Remove the battery before making any adjustments to the power tool or before changing accessories.
• Observe the safety instructions and warnings in this documentation and on the product.

Charging the battery

1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.

Inserting the battery

WARNING

• Risk of injury by short circuit or falling battery!
• Before inserting the battery, make sure that the contacts on the battery and the contacts on the product are free of foreign matter.
• Make sure that the battery always engages correctly.

1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.

Removing the battery

1. Press the battery release button.
2. Remove the battery from the product.

Fall arrest

WARNING

• Risk of injury by falling tool and/or accessory!
• Use only the Hilti tool tether recommended for your product.
• Prior to each use, always check the attachment point of the tool tether for possible damage.
• Do not secure a tool tether to the belt hook. Do not use a belt hook to lift the product.
• Comply with the national regulations for working at heights.
• As a drop arrester for this product, use only a combination of the Hilti retaining strap and the Hilti tool tether #2261970.
• Secure the retaining strap to the installation openings for accessories.
• Check that it holds securely.
• Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a load-bearing structure. Check that both carabiners hold securely.
• Comply with the operating instructions of the Hilti retaining strap and those of the Hilti tool tether.

Operation

• Observe the safety instructions and warnings in this documentation and on the product.

Installing an accessory tool 2

CAUTION

• Risk of injury through use of the wrong type of accessory tool!
• Do not use worn or damaged accessory tools.

1. Clean the connection end of the accessory tool.
2. Push the accessory tool fully on to the tool holder.
3. Check that the accessory tool is held correctly.

Setting forward or reverse rotation 3

• An interlock prevents switching while the motor is running.
• The control switch is locked when the forward/reverse switch is in the middle position (switch-on interlock).
• Set the forward/reverse switch to the desired direction of rotation.

Switching on

• Press the control switch.
• The speed of rotation is regulated by the distance the control switch is pressed.

Switching off

• Release the control switch.
• Removing the accessory tool

CAUTION

• Risk of injury by the accessory tool! The accessory tool might be hot or have sharp edges.
• Wear protective gloves when changing the accessory tool.
• Pull the accessory tool off the tool holder.

Care and maintenance

WARNING

• Risk of injury with battery inserted!
• Always remove the battery before carrying out care and maintenance tasks!

Care of the product

• Carefully remove stubborn dirt.
• Carefully clean the air vents, if present, with a dry, soft brush.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as these can attack the plastic parts.
• Use a dry, clean cloth to clean the contacts of the product.

Care of the Liion batteries

• Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.
• Avoid unnecessary exposure of the battery to dust and dirt. Never expose the battery to high levels of moisture (e.g. by being dipped in water or left in the rain).
• If a battery has been soaked by moisture, treat it as a damaged battery.
• Isolate it in a non-flammable container and consult Hilti Service.
• Keep the battery free of extraneous oil and grease. Do not permit dust or dirt to accumulate unnecessarily on the battery. Clean the battery with a dry, soft brush or a clean, dry cloth. Do not use cleaning agents containing silicone as these can attack the plastic parts.
• Do not touch the contacts of the battery and do not remove the factory applied grease from the contacts.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as these can attack the plastic parts.

Maintenance

WARNING

• The danger of electric shock! Improper repairs to electrical components may lead to serious injuries including burns.
• Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all function correctly.
• Do not use the product if signs of damage are found or if parts malfunction. Immediately have the product repaired by Hilti Service.
• After cleaning and maintenance, install all guards and protective devices and check that they are in full working order.
• To help ensure safe and reliable operation, use only genuine Hilti spare parts, consumables and accessories. Spare parts, consumables and accessories approved by Hilti for use with your product can be found at your Hilti Store or online at: www.hilti.group

Installing/removing friction ring and O-ring 4

1. Using suitable pliers, remove the worn/damaged friction ring and the O-ring.
2. Seat the new O-ring in the groove in the tool holder.
3. Seat the friction ring in the groove in the tool holder.
4.  Make sure that the accessory tool is securely installed in the tool holder.

Transport and storage

Transport of cordless power tools and batteries

CAUTION

• Accidental starting during transport!
• Always transport your products with the batteries removed!
• Remove the battery/batteries.
• Never transport batteries loose and unprotected. During transport, batteries should be protected from excessive shock and vibration and isolated from any conductive materials or other batteries that may come in contact with the terminals and cause a short circuit. Comply with the locally applicable regulations for transporting batteries.
• Do not send batteries through the mail. Consult your shipper for instructions on how to ship undamaged batteries.
• Prior to each use and before and after prolonged transport, check the product and the batteries for damage. Storage of cordless power tools and batteries

WARNING

• Accidental damage caused by defective or leaking batteries!
• Always store your products with the batteries removed!
• Store the product and the batteries in a cool and dry place. Comply with the temperature limits stated in the technical data.
• Do not store batteries on the charger. Always remove the battery from the charger when the charging operation has been completed.
• Never leave batteries in direct sunlight, on sources of heat, or behind glass.
• Store the product and batteries where they cannot be accessed by children or unauthorized persons.
• Prior to each use and before and after prolonged storage, check the product and the batteries for damage.

Troubleshooting

If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service.

Product does not

work.

| The battery is not fully

inserted.

| ▶ Insert the battery.

→ page 27

The battery does

not engage with an audible click.

| The retaining lugs on the

battery are dirty.

| ▶ Clean the retaining lugs and engage the

battery in the working position.

The battery runs

down more quickly than usual.

| Very low ambient tem-

perature.

| ▶ Allow the battery to warm up slowly to

room temperature.

Running speed sud-

denly drops consid- erably.

| Battery is discharged.| ▶ Charge the battery.

→ page 27

The power tool or

the battery becomes very warm.

| Electrical fault.| ▶ Switch the power tool off immediately,

remove the battery, keep it under obser- vation, allow it to cool down and contact Hilti Service.

The tool is overloaded

(application limits ex- ceeded).

| ▶ Select a suitable power tool for the

application.

The control switch

can’t be pressed, i.e. the switch is locked.

| The forward/reverse

switch is in the middle position.

| ▶ Set the forward/reverse

switch to the desired position. → page 28

Disposal

• WARNING Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
• DO NOT send batteries through the mail!
• Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
• Dispose of your battery out of the reach of children.
• Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public health and safety resources for disposal instructions.
• Most of the materials from which Hilti products are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
• Do not dispose of power tools, electronic equipment or batteries as household waste!

Manufacturer’s warranty

• Please contact your local Hilti representative if you have questions about the warranty conditions.

Further information

• For more information on operation, technology, environment and recycling, follow this link: qr.hilti.com/manual/?id=2384752
• This link is also to be found at the end of the operating instructions, in the form of a QR code.

EC Declaration of Conformity

• UK Declaration of Conformity

Manufacturer:

• Hilti Corporation
• Feldkircherstraße 100
• 9494 Schaan Liechtenstein

UK Importer:

• Hilti (Gt. Britain) Limited
• No. 1 Circle Square, 3 Symphony Park
• Manchester, England, M1 7FS
• Hilti Corporation
• LI-9494 Schaan
• Tel.:+423 234 21 11
• Fax:+423 234 29 65
• www.hilti.group

Documents / Resources

| HILTI SIW 2­A12 Cordless Impact Wrench [pdf] User Manual
SIW 2 A12 Cordless Impact Wrench, SIW 2 A12, Cordless Impact Wrench, Impact Wrench, Wrench
---|---

References

• Главная страница - Hilti Россия

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>