IDEAL 36-600 Standard Drill Tap User Guide
- June 13, 2024
- IDEAL
Table of Contents
Drill Tap Use & Care Guide
36-600
36-600 Standard Drill Tap
For optimal performance:
-
Keep drill tap bit perpendicular to work surface.
-
Do not slow bit when approaching the threading step. Use full recommended RPM throughout the intitial cut.
-
To remove the bit, put the drill in reverse, pull the drill tap up so that the threads are engaged with the bottom of the hole.
Then, slowly reverse the bit through the hole, making sure to keep the bit vertical. -
Use with cordless or impact rated drills.
-
Use a fully charged battery.
-
Use the recommended RPM range of 300 to 1500 RPM.
WARNING Electrical and eye injury hazard. Contact with live voltage may
cause injury or death. Do not use on or near live voltage. Wear eye
protection.
WARRANTY: See www.idealind.com or call
Customer Assistance for warranty details.
IDEAL INDUSTRIES, INC.
Sycamore, IL 60178 U.S.A.
800-435-0705 •
www.idealind.com
IS 0003-1 Made in Taiwan
Test Equipment Depot – 800.517.8431 – 5 Commonwealth Ave, MA 01801
TestEquipmentDepot.com
Documents / Resources
|
IDEAL 36-600 Standard Drill
Tap
[pdf] User Guide
36-601, 36-600, 36-600 Standard Drill Tap, Standard Drill Tap, Drill Tap, Tap
---|---