C URBAN OUTFITTERS SCNSP2339A Sanna Sconce Instruction Manual
- June 13, 2024
- C URBAN OUTFITTERS
Table of Contents
SANNA SCONCE
URBAN OUTFITTERS
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED:
Pencil, Drill / Scre w driver
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface.
Use a TYPE A 40W MAX BULB DO NOT EXCEED SPECIFIED WATTAGE
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning
vents. Adjust levelers so that the furniture sits flat on uneven floors. Blot
spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
STEP 1
A) Locate the desired position of the sconce on the wall. If attaching to
drywall, Place the Mounting Bracket (D) on the wall and mark the location of
the the holes in the bracket on the wall.
B) Remove the Mounting Bracket (D) from the wall and pre-drill holes for the
Wall anchors
(G) with a drill and then insert the anchors.
C) Place the Mounting Bracket (D) back over the wall anchors and insert the
Screws (F).
Tighten with a Phillips head screw driver or a drill.
D) If drilling into a stud, Place the Mounting Bracket (D) on the wall and
insert Screws (F). through the bracket into the drywall. Tighten with a
Phillips head screw driver or a drill.
STEP 2
Place the Base (A) over the Mounting Bracket (D) as shown and insert the
Screws (E).
Tighten with a Phillips head screw driver. Screw a Type A 40W bulb into the
Base (A).
Plug in the sconce to complete assembly.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent
rights.
Any unauthorized reproduction, adaptation, distribution or other infringement
will be prosecuted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>