SMPLABS TAG6 Battery-Powered Wearable Bluetooth Device User Manual
- June 13, 2024
- SMPLABS
Table of Contents
**SMPLABS TAG6 Battery-Powered Wearable Bluetooth Device User Manual
**
TAG6
The TAG6 is a battery-powered, wearable Bluetooth device containing a single button used to signal for duress as part of the SMP Staff Secure solution. The TAG6 is designed so that it can be easily worn as part of an individual badge real on their uniform.
Features
- Double-tap activation mechanism
- Raised, protective button edge to minimize accidental button presses
- Soft carbon-pill based, ergonomic button designed for comfort and durability
- Designed to work with the Strongline Staff Safety system
- Easily mounted
- Operational self-check feature
- Piezoelectric speaker used to provide audible feedback on alert trigger
- Flashing red light to indicate alert receipt by Strongline Cloud Services
- Minimal radio spectrum footprint
Specifications
- Wireless: BLE 5.0
- Power Consumption: < 15 µA in normal mode < 200mA during alert mode
- Operating temperature: -20° C to 60° C
- Battery Type: CR2477
- Battery Life: 10 – 12 years
- Dimensions & Material: 38 x 54 x 16 mm 1.50 x 2.13 x 0.62 inABS
- Waterproof: IP66
- Certification: CE; FCC
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>