TABLETOP SCENICS TTSCW-DCS-159 PCPD: Wall Sections Instruction Manual

TABLETOP SCENICS TTSCW-DCS-159 PCPD: Wall Sections

Product Information

The TTSCW-DCS-159 PCPD is a set of wall sections that are designed for assembly. These wall sections are made from bendy wood, which is specifically designed to curve around a designed frame. The product comes with a series of icons that are used throughout the instructions to assist with assembly. It is important to note that some parts or their placement may be optional, and the process order or specific parts used may vary.

Product Usage Instructions

1. Before starting the assembly, carefully read through the entire set of instructions to familiarize yourself with the process.
2. Do not use glue during the assembly process.
3. For each wall section, carefully score and fold the indicated parts according to the instructions.
4. Some parts or their placement may be optional. Refer to the instructions to determine if a specific part is required.
5. Pay close attention to each step and ensure that the process order or specific parts used are followed as indicated.
6. If instructed, repeat the process of making a specific part for the specified number of times.
7. At certain points in the instructions, you may need to assemble the same part from a different angle. Follow the instructions carefully to ensure correct assembly.
8. Once a sub-assembly is complete, it is ready to be added to the main kit.
9. Once all the assembly steps are completed, check if there are any additional optional parts that need to be added according to the instructions.
10. Handle the wall sections with care as they may be fragile. Do not bend them unless it is required to fit around a designed frame.

SYMOLS

These are a series of icons that may be used throughout the instructions to help your assembly. If in doubt, scroll ahead to confirm.

• Do not glue

• Carefully score and fold

• This part or its placement is completely optional

• Look closely at this step. The process order or part used, may be specific

• Repeat making this part for the specified numberof times

• The next instruction step will be the same assembly but from a different angle

• Sub-assembly complete. This smaller construction is ready to aidd to the main kit

• Assembly Complete! There may be more optional parts so check to the very end of the instructions

• FRAGILE: DO NOT BEND. “Bendy wood” is designed to curve around a designed frame only

ASSEMBLING INSTRUCTION

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>