MyCharge 2-in-1 Charging Stand User Manual
- June 10, 2024
- myCharge
Table of Contents
MyCharge 2-in-1 Charging Stand
QUICK START GUIDE
System components
1. Open the charging stand from flat
2. Plug AC adaptor Into wall & Insert cable Into adaptor Input.
3. Choose landscape or portrait charging.
- Landscape for Netillx, HBO Max. Hulu end other streaming services.
- Portrait for totting, FaceTlrne, -Mick and other apps of your choice.
Note : You must center phone dIrecity over the charging coils as shown:
Adjusting the shelf
Audible tones
The 2-in-1 Charger was designed to tell you 2 important things:
1. When your phone Is properly pieced end charging is inthated, you will hear
en “up” tore. When you remove your phone from the charge you Ml hear a ‘down”
tone.
2. If you did nat place your phone correctly overthe charging coil, the
charger WM say the word ‘image, Indicating that you need to reposition your
phone more accurately.
Note : We recommend that you keep the audible tones on to ensure thee your phone Is charging. However, If you meter no bones or voice press the MUTE button on the bottom of the unit
LED Charging Lights
When you’ phone Is charging, the LED will appear for 10 seconds and then turn oft. This Is in order to keep rex room dark at night LED will blink when phone Is not centered & unable to charge.
Charging a 2nd Device
The 2-in-1 Charger is designed with a high-Speed 20W USB-C port to charge a second device with yam own supplied charging cable. Whether fts anor phone, tablet, earbuds, headphones or e-reeder the 2-In-1 charges all of your favorite devices.
For FULL user manual and more information, scan the QR code with your smartphone camera or go to: support.mycharge.com
DOWNLOAD
MyCharge 2-in-1 Charging Stand User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>