nVent HOFFMAN CCPM4 Panel Conversion Kit Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
CCPM4 Panel Conversion Kit
Product Information: Panel Conversion Kit
| Component | Description |
|---|---|
| Panel Conversion Kit | A conversion kit designed for installing panels in an |
enclosure.
Enclosure Stud| A stud used for attaching the panel conversion kit to the
enclosure.
Enclosure| The main enclosure where the panel conversion kit is
installed.
Adapter M8 Flanged Nut| An adapter nut with a flange, used for securing the
panel to
the enclosure stud.
Flat Washer| A washer placed over the stud on the adapter for added
stability.
Product Usage Instructions
- Ensure you have the Panel Conversion Kit, Enclosure Stud, Enclosure, Adapter M8 Flanged Nut, and Flat Washer.
- Place the flat washer over the stud on the adapter.
- Install the panel onto the enclosure stud.
- ( Note: The panel needs to be ordered separately as it is not included in the kit.)
Panel Conversion Kit
- Install adapter into corner of enclosure by placing adapter over enclosure stud as shown. Install M8 flanged nut and torque to 99 inlbs (11 Nm).
- Place flat washer over stud on adapter.
- Install panel. (order separately)
© 2019 Hoffman Enclosures Inc.
PH7634222211 · nVent.com/HOFFMAN
P/N 64260001 87568787
References
Read User Manual Online (PDF format)
Loading......