VIVOHOME VH785 Electric Automatic Pasta Ramen Noodle Maker Machine User Manual
- June 4, 2024
- VIVOHOME
Table of Contents
VIVOHOME VH785 Electric Automatic Pasta Ramen Noodle Maker Machine
Parts Description
Tips:
The extruding pile contains a plastic washer that can be removed for
cleaning.
The washer must be replaced after cleaning, otherwise the appliance will not
operate properly.
- Top cover: Operate locking device in the body, with safe protection function.
- Mixing axle: Mix flour and water.
- Mixing bowl: Hold flour and other ingredients.
- Extruding pipe: Take over the mixed dough and send to extruding axle.
- Extruding axle:extruding pasta.
- Extruding discs: Make different shapes of noodles.
- Extruding head: Fix extruding discs
- Discs nut: Fix extruding head.
- Body: The power source of product, provide power.
- Drawer :Storage the extruding discs
- Cleaning scraper: Scrape flour when measuring flour, cut noodles, clean discs with two heads of needle
- Water cup: Measure water, vegetable juice and the mixture of egg and water.
- Flour cup: Measure flour.
Operating Manual
ATTENTION:READ THIS MANUAL
All the device users do not have to activate the device without having
previously read the content of this operating manual carefully, which should
be kept with care for further consultation.
The home appliance must be used only following the modality explained in this operating manual, paying caution and attention Any inaccurate use can generate hazards and/or damage to people or things.
Unpacking, Assembly
ATTENTION:RISK SUFFOCATION
Don’t allow children or people with restricted physical abilities to play with
the packing materials. plastic bags and polystyrene parts represent a real
suffocation danger!
Extract the home appliance and any respective accessorize from the box.
Remove the device and any respective accessorize from the plastic envelopes,
carton packages and or polystyrene parts
It is suggested to keep the original packages for at least 30 days artier the
purchase, also in case in the future you will need to pack up again the
device.
Before every usage, remove all the packaging material and wash any removable
component which will get in contact with food (as shown at the paragraph
“CLEANING AND MANTAINANC E ”
Make sure that everything will be completely dry before reassemble the device.
Assemble the device as shown in this operating manual.
Control that the device is complete with all the accessorizes, and that it
doesn’t present abnormalities, failures or damages and therefore that it is
perfectly working.
In case it turns out that the device is not complete or it shows clear
aesthetic damages due to collisions or tumbles, do not insert the power plug
in the socket and bring it to an authorized assistance point for a check up.
Packages Disposal
Paper and carton of this home appliance are recyclable.
In any case do not deposit the package in the common garbage or scantier it in
the environment. Packages must be disposed in a differentiate way, separating
them by typologies as per the rules in force in your country in order to
favours the recycle process of raw materials.
Contact your Municipality or to authorized garbage dump centre point for
related and more detailed information.
This home appliance has been applied to the law relating to the recycling of
packaging for consumption goods through the National Packaging Consortium.
Instruction And General Safety Rules
ATTENTION:RISK OF ELECTROCUTION.
Do not open, dissemble or modify the home appliance. Inside the device there
are dangerous tensions or high voltage electric current. Do not dismantle, do
not open, do not try to repair the home appliance by yourself, not even atier
the warranty period.
Do not use the product for purposes/uses different from what displayed in this
operating manual. Make sure that the voltage of the socket corresponds to the
voltage shown on the home appliance’s label. If there is no correspondence
between what is indicated on the home appliance’s label and the system of the
place where it will be used do not insert the plug in the socket.
Do not leave the home appliance unattended when it’s working or not even
switched off with the plug into the socket.
Use this home appliance only for domestic use and not professional use.
This home appliance is not adapt to be used by groups, mutual companies, or
other situations however similar to a professional use.
If possible avoid to use extension leads; if this is indispensable adopt
exclusively extension leads in keeping with the European’s instructions, of
the shortest length possible.
It is important to make sure that the cables section and the maximum
absorption allowed are compatible and well proportionate to the device to
connect.
Do not use more than one extension leads connected among each other.
Do not handle or use home appliances with wet or humid hands.
Before cleaning the home appliance, always unplug it from the socket.
Remove the plug from the socket when the appliance is not in use.
Switch off the device before removing the plug from the socket.
Remove the plug from the socket by holding it firmly and not by pulling it from
the cable.
The voltage shown on the label of the product is present until the product
itself remains connected to the socket.
ATTENTION:RISK OF ELECTROCUTION.
Children or people with restricted physical abilities don’t distinguish the
hazards connected to a incorrect use of electric appliances, therefore do not
allow them to use. Do not allow children to play with the home appliance.
Supervise and help, people with restricted physical abilities, for a correct
and secure use of the home appliance. This home appliance is not adapt to be
used with external timer or additional remote monitoring systems.
ATTENTION:RISK OF ELECTROCUTION
Keep away from water!!! In any case do not immerse the hands in the liquid to
retrieve the device without having before removed the plug from the socket. Do
not use home appliances close to bins containing liquids, taps, sinks, bath
tubs, etc.
Do not immerse the device into water or any other liquid. Do not wet the plug.
Do not allow people who are taking a bath or a shower to use or to get in
contact with the device if this is connected to the socket. do not use the
device if it is accidentally wet or even just dampen. Do not wash the home
appliance with water.
If the home appliance will accidentally fall into water or other liquids, with
dry hands immediately extract the plug from the socket.
If the home appliance will get in contact with water or other liquids, do not
insert the plug into the socket and do not reuse the home appliance before
having it checked by an authorized assistance center point. Noncompliance of
this precaution is the cause of dangerous electric shocks with very serious
consequences.
We will not be considered responsible for damages caused, both to the user and
to third party, in case of incorrect handling or wrong use and/or different
from what explained in this operating manual.
The utilization of non-original accessorizes might cause damages to third
party or to the user and compromise the functionality of the home appliance
itself.
The utilization of the device with not original accessorizes or not correctly
assembled invalidates the warranty of the product.
An incorrect and inaccurate use may damage the device and cause damage to the
user.
Do not hold and lite the home appliance by the cable.
Never twist, kink or wrap the cord around the appliance as this may cause the
cord insulation to weaken and split, particularly where it enters the unit.
Avoid the home appliance’s electric cable to get in contact with sharp rough
edges.
Absolutely do not use the home appliance if:
- It is damaged
- The cable or the plug are damaged
- It fallen
- It is wet
- It fell in water (even if then it dried)
- In these cases it is necessary to contact an authorized assistance point center for a checkup, and if necessary, have it fix.
- Avoid the home appliance to get in touch with real flames or sources of heat.
- Do not use the home appliance to damage objects or to offend people and animals.
- Avoid using the home appliance in presence of solvents and or paints, in a corrosive and explosive atmosphere, in presence of dust or sawdust, risk of fire and explosion.
- In the case the home appliance will show malfunctioning or abnormalities at the first start, switch if off immediately and contact an authorized assistance point center.
- Do not use the home appliance in external environments like for instance: colonnade, terraces, gazebos, balconies, granaries, stables, catile sheds or similar.
- This unit has been permanently lubricated and requires no further oiling.
Warning And Particular Safety Rules
ATTENTION : FIRE HAZARD
To avoid overheating, do not cover the appliance.
ATTENTION : RISK OF CUTTING
Moving mechanical parts!! take care and don’t hurt body.
Avoid contacting any part when it works. Keep hands, hair, clothing, spatulas
and other utensils away from the parts during operation.
Do not touch the parts, especially when the appliances is plugged.
Never reach into the appliance with your fingers or an object while the
appliance is running.If the parts get stuck, unplug the appliance before you
remove the ingredients that block the blades.Please contact the Assistance
point if maintenance is needed during using. Do not disassemble by yourself,
to avoid danger.
Please check the power cord, plug, mixing bowl, mixing axle and other
detachable parts for damage. Please stop using and contact the Assistance if
any damage. Do not disassemble and repair by yourself, to avoid danger.
Be sure the detachable parts are assembled to right position before connecting
the power, to avoid danger.
Do not use the microwave to disinfect all the components to prevent
deformation and damage. Do not put the product into water or other liquid, nor
rinse it with water or other liquids.
Do not clean the product with steel wool, abrasive cleaners
or corrosive liquids.
Do not exposure this product, in order to avoid the discoloration of
appearance.
Do not disassemble or alter this product by yourself.
Do not heat any part of this product.
Disassemble instructions
Disassemble steps
Be sure to turn off the machine and disconnect the power before disassembling.
-
Unscrew the disc nut in a counterclockwise direction and take out the disc.
-
Take out the extruding axle and extruding head
-
Press the top cover hook, lift the end surface of top cover, and remove it
-
Take out the extruding pipe.
-
Take out the mixing axle.
-
Take out the mixing bowl.
Assemble Instructions
Assemble steps
Be sure to turn off the machine and disconnect the power before assembling.
- Mount mixing bowl on body ,insert mixing axle into exposed motor Shatin mixing bowl with pointing to the hexagon holes. lf it is cocked, rotate the mixing axle slighting, it will be successfully installed to right place.
- Insert the extruding pipe on the mixing bowl.
- Insert the extruding axle
- Insert the extruding head
- Tighten the disc nut in a clockwise direction。
- Insert top cover into housing with bayonet pointing to hole in front of mixing bowl. Press it down, finish assembly with a click sound..
Usage Methods
Choose disc
Discs supplied as below 
Be
sure to tighten the disc nut avoid affecting making noodles.
The pasta extruding time is related to the shape of discs. Due to the small
hole of thin spaghettis, it is a normal phenomenon that need about 3 minutes
for extruding before noodles come out.
ATTENTION: During the operation is possible to change the extruding discs
ONLY artier switch OFF the pasta maker.
Instruction For Use
BUTTON OPERATING INSTRUCTIONS
“Confirm/cancel ”
Connecting to the power, the machine will have beep sound, and displays”—-“.
Pressing any function button, displays “ON”, the machine will enter standby
mode.
If no any action within 60 seconds, the machine will enter standby mode.
The machine will stop working and standby if press the “confirm/cancel” during
the working process..
“Chewy Noodle, Fast Noodle, Dumpling Wrapper ”
Select the function and the indicator will blink under standby mode, press”
CONFIRM/CANCEL” button, the machine start to work ,and it will stop
automatically after extrusion finished, this progress will take around 15
minutes. It will display ”OFF” after this progress and alert.
“Extrude”
After automatically function finished, if there are some dough left in the
mixing bowl, please press “Extrude” function to extrude the remained dough.
The countdown time for “Manual” function is 5 minutes.
Do not use this function before water and flour are mixed well.
Otherwise may cause malfunction, affecting the life of the machine.
If only need to mix the dry flour with water ,please press “Knead” button, and
press” confirm/cancel” button ,the machine will knead the dough for 4 minutes,
and the ready dough can be took out from the machine after it stopped.
This product can intelligent identify the hardness of mixing flour and water.
It is a normal phenomenon that the mixing axle will repeatedly reverse in the
working process. If the digital
display indicates “E1” after repeatedly reversing, please check whether the
flour is too dry or some foreign bodies inside.
If no foreign bodies inside, please add proper amount of water and choose
“Extrude” function after two minutes’ mixing. If it still cannot work normal,
we suggest to disconnect the power and clean flours in disc and check whether
it is blocked by flours or other bodies.
Please reconnect the power and continue to use, if it still display “E1”,
please contact the Assistance for maintenance.
Do not add any non-liquid foreign body except flour during the working process.
(Eggs are required mixing with water.)
Do not open the top cover, unscrew the disc nut to open the fastening plate or
touch the mixing axle by hand in the working process, to avoid accident.
Measuring ingredients
Reference table for flour and water ratio:
Eggs liquid must be mixed with water before using.
The Ultrathin Spaghettis water added amount needs 10ml more than standard, as
the holes on this disc are very small, it will need 2-3 minutes more to be
normal extruding.
The maximum amount of dry flour is 480g (three cups), water added amount is
160ml (±10ml deviation according to flour humidity).
The minimum amount of dry flour is 160g (one cup),water added amount is 60ml
(±5ml deviation according to flour humidity).
Carefully add flour and water in accordance with the recommended amount in
reference table. Otherwise the noodle is too dry or too wet, can cause parts
damaged.
Do not kneading dough before ensure the flour and water are mixed uniform when
use manual function, in case the discs’ holes are blocked by dry flour, which
will lead to parts damaged.
This product with intelligent control program; it will stop automatically
after a noodle-made period. If you want to continue to use, please waiting for
20-30minutes, until the motor is cool, this method help to extend the product
life.
It is forbidden to use beyond capacity.
Be sure to operate in strict accordance with recommended ratio of flour and
water. Abnormal failure caused by not operating according to manual is out of
the scope of warranty.
Noodles making process
-
Open the top cover
-
Measuring flour:
Measuring standard: As shown in Figure B, please use the cleaning scraper lever the flour. The flour quantity is subject to flat cups. Figure A is excessive, it is forbidden -
Measuring water:
Please put the water measuring cup on the flat table, check the scale line from a horizontal viewing, Figure A is forbidden -
Pour flour into the mixing bowl
-
Insert the top cover to the right place in body. Connect to power;
Press the function button and press “confirm/cancel” button. When the mixing axle start moving, pour proper amount of water into mixing bowl, according to the ratio of flour and water in reference table. -
After about 10 minutes, the machine alarm, noodles making are finished automatically.
Tips: The holes in top cover cannot be choked, must be able to drip water
slowly.
Please mix eggs together with water to measure when making egg noodles. Do not
add egg liquids into flour directly.
ATTENTION: Do not use vegetables blended but only juice .
Cleaning Method
- Disassemble all the parts, keep aside to be dry in the open air.
- Use the cleaning scraper to clean the mixing bowl after it’s dry
- Use the cleaning scraper to clean the mixing axle after it’s dry
- Use the cleaning scraper needles to clean the extruding discs after it’s dry
ATTENTION: Do not clean all the parts immediately after using, put aside in the open air or in refrigerator around 2 hours, then it will be much easier to clean with cleaning scraper.
F.A.Q.
-
Pasta maker cannot connect to power. The plug off or poor contact.
-
Pasta maker does not extrude noodles.
-
Put too much water: Take out the dough in mixing bowl, tear it as little peanut size, add proper amount of flour, and press Extrude function.
-
Put too little water: Take out the using extruding discs, replaced with a new disc, add proper amount of water, and press extrude function.
-
What kind of noodles can we make?
We provide 13 different discs, which can make 13 different shapes of noodles. You can also add egg or juice to make different flavors of noodles. -
How to deal with the overmuch remaining dough?
-
The dough is too wet or flour is damped. Please make sure flour is stored in dry vessel. Make noodles again after adjust the water amount according to reference table of flour and water ratio.
-
Have not cleaned mixing bowl, mixing axle and extruding disc before using. Please make sure the related parts are dry.
-
Adding water in wrong order or using wrong flour.
-
How to use flour measuring cup correctly?
Scoop full of flour by flour cup. Use the cleaning scrapers crapes off the excess flour on the top of cup. That is a cup of flour (For 1-2 people, around 160g). -
Noodles burr or crack?
-
The noodles have more burrs or cracks at the beginning and at the end of extruding, because of mixing reason. Add eggs or proper amount of cooking oil, noodles can be smooth.
-
If you have enough time, you can tear the noodles as little peanut size dough and put them back to mixing bowl. Then press Extrude function, extruding the dough again. The more times of repeating, the more smooth and chewy noodles.
-
Not convenient to clean discs?
After the flour in disc dry, knock it on hard surface, flour will fall off automatically. -
How to successfully make noodles?
-
Use our flour measuring cup and water measuring cup to hold flour and liquids. The proportion of flour and liquid must be in strict accordance with the instruction.
First pour flour into mixing bowl, cover the top cover, after machine running, slowly and evenly pour the liquids from the holes on the top cover. -
Any requirement for using flour?
We recommend use middle or high gluten flour. -
There is a small amount of flour remaining after finishing making, how to deal with it?
First turn off the machine, take out the remaining dough and put them together. After put the dough back to mixing bowl, press “Extrude” button, the machine will continue to extrude noodles. -
Noodles are hot when come out, they will stick together, how to deal with it?
-
After noodles come out, sprinkle some flours, can make noodles more chewy, and not easy to stick together.
-
Please cut noodles in proper length.
-
Why noodles will break?
In most case, it is because water is not enough, please add water in strict accordance with the instructions propor on.