RYOBI RY18LMX40A 40cm Cordless Brushless Lawn Mower Instruction Manual

: June 12, 2024
: RYOBI

RYOBI RY18LMX40A 40cm Cordless Brushless Lawn Mower

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-PRODUCT-
IMAGE

Product Information

The cordless lawnmower is designed with a focus on safety, performance, and dependability. It is essential to read and understand the instructions in this manual before assembling, maintaining, and operating the product.

General Safety Warnings

When using the product, it is important to follow the safety rules outlined in the manual for your own safety and that of bystanders.
Only use the battery packs specified in this manual to operate the product and follow basic safety precautions to reduce the risk of fire, leaking batteries, and personal injury.

Personal Safety
The cordless lawnmower has the potential to cause serious injury or death if safety instructions are not followed. It is important to:

Become familiar with the controls and correct use of the product.
Never allow children, individuals with reduced physical or mental capabilities, or those unfamiliar with the instructions to operate, clean, or maintain the product.
Stay alert, use common sense, and avoid operating the product while tired, ill, or under the influence of drugs, alcohol, or medication.
Wear heavy, long trousers, long sleeves, and sturdy anti-slip footwear. Avoid wearing short trousers, sandals, or going barefoot.
Always wear safety glasses with side shields.
Ensure stable footing, especially on slopes. Walk instead of run while operating the product.

Product Usage Instructions

Follow these steps to safely use the cordless lawnmower:

Read and understand all instructions provided in the user manual.
Ensure that the battery packs specified in the manual are properly installed and charged.
Wear appropriate safety gear, including heavy, long trousers, long sleeves, sturdy anti-slip footwear, and safety glasses with side shields.
Inspect the area to be mowed for any obstacles or hazards. Remove any debris, rocks, or other objects that may interfere with the operation of the lawnmower.
Start the lawnmower according to the instructions provided in the manual.
Mow the lawn in a systematic pattern, moving back and forth in straight lines to ensure even coverage.
Be cautious when approaching edges, corners, or uneven terrain to prevent tipping or loss of control.
If the lawnmower becomes clogged or stops working properly, turn off the power and follow the troubleshooting steps provided in the manual.
After use, turn off the lawnmower and remove the battery packs for storage or recharging.
Clean the lawnmower as instructed in the manual to maintain its performance and prolong its lifespan.

By following these usage instructions and adhering to the safety precautions, you can safely and effectively operate the cordless lawnmower.

Important!
It is essential that you read the instructions in this manual before assembling, maintaining and operating the product.
Subject to technical modification

Safety, performance, and dependability have been given top priority in the design of your cordless lawnmower.

INTENDED USE

The cordless lawnmower is intended for outdoor use only.
The product is designed for domestic lawn mowing. The cutting blade should rotate approximately parallel to the ground over which it is being wheeled. All four wheels should touch the ground while mowing. It is a pedestrian- controlled walk-behind lawnmower designed to be pushed by hand.
The product should never be operated with the wheels off the ground. It should not be pulled or ridden on. It should not be used to cut anything other than domestic grass lawns.
Do not use the product for any other purpose.

**GENERAL SAFETY WARNINGS

**

WARNING
When using the product, the safety rules must be followed. For your own safety and that of bystanders, please read these instructions before operating the product. Please keep the instructions safe for later use.

WARNING
The product should be operated only with the battery packs specified in this manual. When using a battery operated product, basic safety precautions should always be followed to reduce the risk of fire, leaking batteries, and personal injury.

PERSONAL SAFETY

The product is capable of amputating hands and feet, and of throwing objects. Failure to observe all safety instructions could result in serious injury or death.
Be familiar with the controls and the correct use of the product.
Never allow children or people with reduced physical, sensory, or mental capabilities or persons who are not familiar with these instructions to operate, clean, or maintain the product. Local regulations may restrict the age of the operator. Children should be adequately supervised to ensure they do not play with the product.
Stay alert, watch what you are doing, and use common sense when operating the product. Do not operate the product while tired, ill, or under the influence of drugs, alcohol, or medication. A lapse in concentration while operating the product may result in serious personal injury.
Wear heavy, long trousers, long sleeves, and sturdy anti-slip footwear. Do not wear short trousers, sandals, or go barefoot. Avoid wearing clothing that is loose-fitting or that has hanging cords or ties.
Always wear safety glasses with side shields.
Always be sure of your footing especially on slopes. Keep firm footing and balance. Walk, never run.
Use the product across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes.
Do not use the product near drop-offs, ditches, excessively steep slopes, or embankments. Poor footing could cause a slip and fall accident.

WORK AREA SAFETY

Never use product while people, especially children, or pets are within 15 m because of the danger of objects being thrown by contact with the blade.
Objects struck by the lawnmower blade can cause severe injuries to persons. Thoroughly inspect the area where the product is to be used and remove all rocks, sticks, metal, wire, bones, toys, or other foreign objects. Remember, string or wire may entangle with the cutting means.
Always use the product in the daylight or with good artificial light.
Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The product creates sparks which may ignite the dust or fumes.
Do not operate the product on wet grass or in the rain.
Do not use the product when there is a risk of lightning.
Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the product and the mowing activity. Never assume that children will remain where you last saw them.
Keep children out of the mowing area and under the watchful care of a responsible adult other than the operator. Be alert, and turn the product off if a child enters the area.
Use extra care when approaching blind corners, shrubs, trees, or other objects including overhanging shrubs, which may block your view.

BATTERY TOOL USE AND CARE

Read, understand, and always follow the safety instructions that came with your battery and charger. Failure to do so may result in electric shock, fire or other hazardous situations. Keep all the instructions together in a safe place for future reference.
Battery-operated products do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Remove the isolator key whenever you are not operating the product.
Remove the battery pack before making any adjustments, cleaning, or removing material from the product.
Ensure that the isolator key is removed before inserting battery pack.
A battery pack must be recharged only with the charger specified by the manufacturer. Using a charger with an incompatible battery pack may create a risk of fire. Use battery pack only with charger listed.
Use only battery pack intended specifically for the product. Use of any other battery packs may result in a risk of fire, electric shock, or injury to persons.
When battery pack is not in use, keep it away from other metal objects like, paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery pack terminals together may cause sparks, burns, fire or explosion.
Do not place battery products or their batteries near fire or heat. This increases the risk of explosion and possibly injury.
Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Protect the battery pack against moisture and water. Do not charge the product in a damp or wet location. Following this rule will reduce the risk of electric shock.
In case of damage and improper use of the battery, vapour may be emitted. Provide for fresh air, and seek medical help in case of complaints. The vapour can irritate the respiratory system.
Do not leave the battery pack inside a vehicle in hot or cold conditions.
Do not incinerate the battery.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

CORDLESS LAWNMOWER SAFETY WARNINGS

Before use, always visually inspect to ensure blades, blade bolts, and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to preserve balance.
The blade on the product is sharp. Use extreme caution and wear heavy-duty gloves when fitting, replacing, cleaning or checking bolt security.
Bring the product to an authorized service centre to replace damaged or unreadable labels.
Check all nuts, bolts, and screws at frequent intervals for proper tightness to be sure that the product is in safe working condition.
Frequently check the grass catcher for wear, holes, or deterioration.
Replace worn or damaged parts before operating the product.
The product must be started with the user behind the handlebars in the operator safety zone. Never start the product if:
- not all four wheels are on the ground the grass discharge chute is exposed and is not protected by the grass catcher and grass discharge chute cover hands and feet of all persons are not clear of the cutting enclosure
Never operate the product if the on/off switch on the handlebar does not properly start and stop the product.
Never attempt to lock the on/off switches in the on position; this is extremely dangerous.
Do not force the product. It will do the job better and safer at the speed for which it was designed.
Stop the blade when crossing gravel surfaces.
Do not pull the product backwards unless absolutely necessary. If you must back the product away from a wall or obstruction, first look down and behind to avoid tripping or pulling the product over your feet. Turn off the motor and allow the blade to stop if the product has to be tilted for transportation when crossing surfaces other than grass, and when transporting the product to and from the work area.
Never use the product with defective guards or shields, or without safety devices, such as deflectors or grass collectors, in place.
Do not tilt the product when turning on the motor or while the motor is running. If absolutely necessary, you may raise the front of the lawnmower by no more than 5 cm to enable easier starting. Press down on the handlebar to achieve this. Always return the lawnmower to its normal position with all wheels on the ground before cutting. Tilting the lawnmower exposes the blade and increases the probability of objects being thrown and accidental contact with the blade.
Turn on the motor carefully according to instructions and keep hands and feet away from blades. Do not put hands or feet near or under rotating parts.
Never pick up or carry the product while it is running.
Turn off the product, and remove the isolator key and the battery pack. Make sure that all moving parts have come to a complete stop:
whenever leaving the product unattended (including disposal of grass clippings)
before clearing blockages or unclogging discharge chute
before checking, cleaning, or working on the product
before removing the grass catcher or opening the grass discharge chute cover
after striking a foreign object; inspect the product for damage and make repairs as necessary before restarting and operating the product
If the product starts to vibrate abnormally (check immediately)
- inspect for damage, particularly the blades
- replace or repair any damaged parts
- check for and tighten any loose parts
Avoid holes, ruts, bumps, rocks, property stakes, or other hidden objects.
Uneven terrain could cause a slip-and-fall accident. Always ensure that the motor control cable is never trapped, pinched or otherwise damaged during assembly or when folding the handle.

ADDITIONAL BATTERY SAFETY WARNINGS
WARNING
To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

PRODUCT FEATURES

OVERLOAD AND OVERHEAT PROTECTION
The product has an overload protection device. When overloading is detected, the product will automatically turn off. If the overload protector is actuated, the on/off lever must be released. Squeeze the on/off lever to restart the product. The battery pack has overheat protection. Excessive temperatures will cause the battery to stop powering the product. If the battery pack is too warm, allow it to cool down before resuming operation. If the product still does not work, recharge the battery.

NOTE: The battery pack LED indicator will not work if the battery protection feature has caused the battery pack to stop powering the product. Turn off the product or remove the battery pack from the product and the battery pack LED indicator will resume normal function.
The product can be used with one battery in port 1 only, or for added run time, with batteries in ports 1 and 2.

TELESCOPIC HANDLE
The product is equipped with a telescopic handle that can be adjusted for storage and operation. The telescopic handle must be fully extended when setting up the product for use.
NOTE: The product will not function if the telescopic handle is not fully extended and the two latches are not in the correct position.

ON/OFF LEVER

Press the start button and then squeeze the on/off lever (A or B) to start the product. Release the start button and keep squeezing the on/off lever to run the blade. Release the on/off lever to stop the blade.

GENERAL MOWING TIPS
The run time of the battery depends on the condition, length, and density of the grass.
Adjust the cutting height of the lawnmower to suit the current condition of the lawn.

For best performance, always cut off one-third or less of the total height of the grass.
When cutting long grass, reduce walking speed to allow for more effective cutting and a proper discharge of the clippings.
Do not cut wet grass; it will stick to the underside of the deck and prevent proper collection or discharge of grass clippings.
New or thick grass may require a higher cutting height.
To collect the grass cuttings for disposal, remove the mulching plug and fit the grass catcher, making sure that the grass discharge chute cover is properly closed. Empty the grass catcher regularly; otherwise, the discharge chute will become blocked with grass cuttings.
If you are making a light cut and wish for the grass cuttings to remain on the lawn, fit the mulching plug, and close the grass discharge chute cover to cover the discharge opening. It is not necessary to fit the grass catcher in this case.
The product is designed to operate and cut most effectively when moving forwards.
A higher cutting height extends the run time of the battery.

TRANSPORTATION AND STORAGE

Turn off the product, and remove the isolator key and the battery pack. Make sure that all moving parts have come to a complete stop. Allow the product to cool down before storing or transporting.
Clean all foreign materials from the product. Store the product in a cool, dry, and well-ventilated place that is inaccessible to children. Keep the product away from corrosive agents such as garden chemicals and de-icing salts. Do not store the product outdoors.
For transportation in vehicles, remove the isolator key, and secure the product against movement or falling to prevent injury to persons or damage to the product.

WARNING
Use extreme caution when lifting or tilting the product for maintenance, cleaning, storage, or transportation. The blade is sharp; keep all body parts away from the blade while it is exposed.

TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and regulations.
Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

MAINTENANCE

WARNING
Use only original manufacturer’s replacement parts, accessories and attachments. Failure to do so can cause possible injury, can contribute to poor performance, and may void your warranty.

WARNING
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. Have the product serviced by an authorized service center only. When servicing, use only original replacement parts.

Turn off the product, and remove the isolator key and the battery pack. Make sure that all moving parts have come to a complete stop before any cleaning or maintenance task.
You may make adjustments and repairs described in this manual. For other repairs, contact an authorized service Centre.
Replace worn or damaged part for safety.
Check the grass catcher frequently for wear or deterioration.
After each use, clean the product with a soft, dry cloth. Any part that is damaged should be properly repaired or replaced by an authorized service center.
Check all nuts, bolts, and screws at frequent intervals for proper tightness to ensure the product is in safe working condition.
Be careful during adjustment of the product to prevent entrapment of the fingers between moving blades and fixed parts of the product.
When servicing the blades, be aware that even though the power source is turned off, the blades can still be moved.
The blade on the product is sharp. Use extreme caution, and wear heavy-duty gloves when fitting, replacing, cleaning, or checking bolt security.
Replace damaged blades and bolts in sets to preserve balance.
The blade bolts must be adequately tightened. See the manufacturer’s recommendations for blade bolt torque, which can be found in the product specification table in this manual.

CLEARING BLOCKAGES

Turn off the product, and remove the isolator key and the battery pack. Make sure that all moving parts have come to a complete stop.
Always wear heavy-duty gloves when checking or clearing a blockage. The blades are sharp and the blockage itself could be a sharp object.
Remove the grass catcher, check for and carefully clear obstructions.
Check the grass discharge chute, and carefully clear blockages.
Turn the product on its side. Check its underside and the area around the blade. If any blockages are found, remove carefully. Remember, the blade may move during cleaning.

RESIDUAL RISKS
Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk factors. The following hazards may arise during use, and the operator should pay special attention to avoid the following:

injury caused by vibration
- Always use the right tool for the job. Use designated handles and restrict working time and exposure.
injury caused by noise
- Exposure to noise can cause hearing injury. Wear ear protection and limit exposure.
injury from contact with the blades
injury caused by thrown objects

RISK REDUCTION
It has been reported that vibrations from handheld tools may contribute to a condition called Raynaud’s Syndrome. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms. There are measures that can be taken by the operator to possibly reduce the effects of vibration:

Keep your body warm in cold weather. When operating the product, wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud’s Syndrome.
After each period of operation, exercise to increase blood circulation.
Take frequent work breaks. Limit the amount of exposure per day.

If you experience any of the symptoms of this condition, immediately discontinue use and see your physician.

WARNING
Injuries may be caused, or aggravated, by prolonged use of a tool. When using any tool for prolonged periods, ensure you take regular breaks

KNOW YOUR PRODUCT

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-35

start button
On/off lever
Telescopic handles
Handle lock
Grass catcher
Quick release fastener
Rear wheel
Front wheel
Charger
Battery
Mulching plug
Isolator key
Battery door
Cutting height adjustment lever
Grass catcher full indicator
Motor control cable

SYMBOLS ON THE PRODUCT

Read and understand all instructions before operating the product. Follow all warnings and safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate on inclines greater than 15°. Mow across the face of slopes, never up and down.
Do not expose the product to rain or damp condition.
Beware of sharp blades. Blades continue to rotate after the motor is switched off. Remove the isolator key before maintenance.
Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least 15 m away from the operating area.
Beware of sharp blades. Blades continue to rotate after the motor is switched off.
Remove the isolator key before maintenance.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Conforms to all regulatory standards in the country in the EU where the product is purchased
EurAsian Conformity Mark
Ukrainian mark of conformity
The guaranteed sound power level is 94 dB.
Go
Stop

SYMBOLS IN THIS MANUAL

Parts or accessories sold separately
Note
Warning

The following signal words and meanings are intended to explain the levels of risk associated with this product:

DANGER
Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

WARNING
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

Tools

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-33

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-34

Assembly

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-36

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-38

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-39

How To Use?

RYOBI-RY18LMX40A-40cm-Cordless-Brushless-Lawn-Mower-21

Cleaning Operation

Product specifications

English

Product specifications
Cordless Lawnmower
Model
Rated voltage
Width of cut
Height of cut
No-load speed
Weight (without battery)
Grass catcher capacity
Blade bolt torque
Vibration level (in accordance with Annex FF of EN 60335-2-77)
Uncertainty of measurement
Noise emission level (in accordance with Annex GG of EN 60335-2-77)
A-Weighted sound pressure level at operator’s position
Uncertainty of measurement
A-Weighted sound power level
Uncertainty of measurement

Vibration level
The declared vibration value has been measured with a standard test method and may be used to compare one tool with another.
The declared vibration value may be used in a preliminary assessment of exposure. The vibration emission during actual use of power tool can differ from the declared
total value depending on the ways in which the tool is used. Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.

RYOBI® WARRANTY APPLICATION CONDITIONS

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

The warranty period is 24 months for consumers and commences on the date when the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly-acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
any damage to the product that is the result of improper or lack of maintenance
any product that has been altered or modified
any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
any damage caused by non-observance of the instruction manual
any product not displaying the CE approval mark on the rating plate
any product that has been attempted to be repaired by a non-authorized warranty service center or without prior authorization by Techtronic Industries
any product connected to improper power supply (amps, voltage, frequency)
any product used with inappropriate fuel mixture (fuel, oil, ratio of oil/ fuel mixture)
any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
normal wear and tear spare parts
inappropriate use, overloading of the tool
use of non-approved accessories or parts
Accessories provided with the tool or purchased separately including but not limited to blades, saw chains, cutting lines, etc.
Any periodic adjustments to or maintenance cleaning of carburetors
Components (parts and accessories) subject to natural wear and tear, including but not limited to bump knobs, drive belts, clutch, blades of hedge trimmers or lawnmowers, harness, cable throttle, carbon brushes, power cord, tines, felt washers, hitch pins, blower fans, blower and vacuum tubes, vacuum bag and straps, guide bars, saw chains, hoses, connector fittings, spray nozzles, wheels, spray wands, inner reels, outer spools, cutting lines, spark plugs, air filters, gas filters, mulching blades, etc.
For servicing, the product must be sent or presented to a RYOBI authorized service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organization. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.
A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected.
This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey and Russia. Outside these areas, please contact your authorized RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE
To find an authorised service centre near you, visit http://uk.ryobitools.eu/header/service-and-support/service-agents.

DECLARATION OF CONFORMITY

Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
Herewith we declare that the product

Cordless Lawnmower

Brand: RYOBI
Model number: RY18LMX40A

Serial number range: 47515201000001-47515201999999 is in conformity with the following European Directives and harmonised standards
2006/42/EC, 2014/30/EU, 2000/14/EC, 2005/88/EC, 2011/65/EU,
EN 60335-1:2012 +A11:2014+A13:2017, EN 60335-2-77:2010,
EN 55014-1:2017, EN 55014-2:2015, EN 62233:2008, EN IEC 63000:2018

Measured sound power level: 88.5 dB(A)
Guaranteed sound power level: 94 dB(A)

Conformity assessment method to Annex VI Directive 2000/14/EC amended by 2005/88/EC.
The notified body involved:
No.0197 – TÜV Rheinland LGA Products GmbH
Tillystraße 2 – 90431 Nürnberg – Germany
Todd Chipner
Sr. Director, CPT Quality and Asia Regulatory & Safety Winnenden, Dec. 26, 2019
Authorised to compile the technical file:
Alexander Krug, Managing Director
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
RYOBI is a trademark of Ryobi Limited, and is used under license.
© 2019 Techtronic Cordless GP. All rights reserved.

Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden, Germany
961479021-01