Bio Tianhua MU01046 Flip TWS Earbuds User Manual
- June 12, 2024
- Bio Tianhua
Table of Contents
Bio Tianhua MU01046 Flip TWS Earbuds
Product Information
The Flip TWS Earbuds are a pair of true wireless earbuds that come with a charging case and a USB Type-C charging cable. The earbuds have a compact size of 1.07in. x 0.6in. x 0.81in. (2.73cm x 1.5cm x 2.05cm), while the charging case measures 2.13in. x 1.77in. x 2.09in. (5.4cm x 4.5cm x 5.3cm). The key components of the earbuds include a touch sensor, LED indicator, and charging port.
Product Usage Instructions
- To charge the case, plug in the included USB Type-C cable to the charging case. While charging, the case LED indicator will flash red. When fully charged, the light will change to solid red. A beep tone will alert you when the battery is low.
- To change the appearance of the charging case, gently press down on the front and swipe up or down to cycle through different designs.
- The earbuds will automatically power on and pair with each other when you remove them from the charging case.
- If the earbuds don’t connect to any device within 5 minutes, they will power off. To turn them on again, place them back into the charging case and then take them out or press the touch sensor for 3 seconds.
- To pair the earbuds with your device, turn on Bluetooth and select “FLIP TWS” from the list of available devices. When the LED light turns off, it indicates successful pairing and you will hear a beep tone.
- To answer a call, short press the earbud touch sensor once. To reject a call, long press the touch sensor for 3 seconds.
- To control music playback, short press the earbud touch sensor to stop or resume playing. Double press the left touch sensor to play the previous song, double press the right touch sensor to play the next song. Triple press the left touch sensor to decrease the volume, and triple press the right touch sensor to increase the volume.
- To turn off the Bluetooth device, long press the earbud touch sensor for 5 seconds until the red light flashes. The earbuds will automatically turn off if they are away from the Bluetooth device for more than 5 minutes. To turn them on again, press the earbud touch sensor for 5 seconds until the blue light flashes.
- To charge the earbuds, place them inside the charging case. A solid red light on the earbuds indicates that they are charging. Once fully charged, a blue light will turn on for 1 minute and then turn off.
- Note that the earbuds and case can be charged simultaneously, but the earbuds will only charge if there is power in the case. The case needs to have a minimum charge to charge the earbuds. It is recommended to charge the TWS earbuds if they have not been used for more than 3 months.
Flip TWS Earbuds
Package Contents
- 1(One) Pair of True Wireless Earbuds 1.07in. × 0.6in. x 0.81 in.
- (2.73cm x 1.5cm x 2.05cm)
- 1(One) Charging Case 2.13in. × 1.77in. × 2.09in. (5.4cm × 4.5cm x 5.3cm)
- 1(One) Type Charging Cable 5.9in. (15cm)
- 1(One) Instruction Manual
Key component
- Touch Sensor
- LED Indicator
- Charging Port
How To Use
- Change the front design of the charging case by pressing down gently and swiping up/down to cycle through the different appearances.
- The earbud(s) will automatically power on and pair with each other when you take off the earbuds from the charging case.
- The earbuds will power off if they don’t connect to any device within 5 minutes. If the earbuds turn off. To turn the earbud(s) on again put the earbuds back into the charging case then take them off from the charging case or press the touch sensor for 3s
- To pair your earbuds, turn on Bluetooth on your device and choose “FLIP TWS” on the list to connect. When the LED light turns off, they are paired successfully and you will hear a beep tone.
- To answer a call, short-press the earbud Touch sensor once. To reject a call, long press the earbud Touch sensor for 3 seconds.
- Short press the earbud Touch sensor to stop the music; press it again to it resume playing.
- Press the L touch sensor twice to play the previous song. Press the R touch sensor twice to play the next song. Press the L touch sensor triple to decrease the volume. Press the R touch sensor triple to increase the volume.
- Long press the earbud Touch sensor for 5s until the red light flashes, then the Bluetooth device is turned off. The earbuds turn off automatically when the earbuds are away from the Bluetooth device for a duration of over 5 minutes. To turn on the earbuds, press the earbud Touch sensor for 5S until the blue light flashes.
How to Charge
- Charging your case:
- Plug in the charging case using the USB Type-C cable included.
- While the battery case is being charged, the case LED indicator will be flashing red
- When the case is fully charged, the light will change to solid red
- When the battery is low, there will be a beep tone.
- Charging your earbuds:
- Place the earbuds inside the charging case and the earbuds will automatically start charging.
- A solid red light on the earbuds will indicate that the earbuds are charging.
- Once fully charged, a blue light will turn on for 1 minute and then turn off.
- The earbuds and case can be charged simultaneously, but the earbuds will not charge if there is no power in the case. The case needs to have at least a minimum charge to charge the earbuds. You must charge the TWS if it has not been used for more than 3 months.
Technical Specifications
- Model Number: MU01046
- Range: 32ft / 10m
- Earbud Battery Capacity : 30mAh
- Battery capacity: 250mAh
- Play Time: 2/3 Hours per Cycle/10-12 Hours Total (50% max volume)
- Charge Time: 1-2 Hours
- Charging Input: 5V —200 mA
- Frequency Response: 20Hz-20 kHz
- Operating Temperature range: 0-45C
FAQ
- Why can’t I start my TWS earbuds?
- Answer: Please ensure that the earbuds are fully charged for your first use.
- Why won’t sound come out of the earbuds?
- Answer: Check whether the playback device and the TWS earbuds are successfully established. If the audio device is not properly connected, please reconnect. Please also adiust your mobile phone or volume to a suitable volume level.
- Why can’t I find these earbuds in my bluetooth options?
- Answer: Make sure the Bluetooth is in “visible mode”. If no pairing occurs, the Bluetooth function will automatically shut off. Please reopen Bluetooth to “visible mode”. If there is a program error, please reboot your phone, and if a program error is caused by your TWS earbuds, please restart the earbuds.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Charge and operate only as indicated in this manual, as improper use may result in damage to the product or injury.
- To avoid the risk of shock or injury, do not dismantle the device or insert any objects into the Headphones.
- To avoid electronic interference and/or compatible conflicts, turn off the product in any facilities where posted notices instruct you to do so.
- Do not pull the Headphone charging cable. Damage may result to the cable.
- Keep out of reach of children. This is not a toy.
- Avoid exposure to moisture, liquids, heat, flame, and high-voltage equipment.
- Retain these instructions as they contain important information.
- Do not short-circuit the input terminals of the Headphones.
- Do not drop, place heavy weight or allow a heavy impact on the Headphones.
- The PCB of the battery should not be crushed and twisted.
- The battery body should not be Bent.
- Do not disassemble and Do not dispose of in fire.
- Do not use the product while driving or crossing the road.
RF warning statement:
- The device has been evaluated to meet the general F exposure requirement.
- The device can be used in portable exposure conditions without restriction.
FCC ID: 2A2H6MU01046
- Distributed by 1616 Holdings, Inc.
- 701 Market Street, Suite 200
- Philadelphia, PA 19106
- Made in China
- Keep All Relevant Information For Future Reference
- The Bluetooth® word mark and logos are owned by the Bluetooth® SIG.
- All other trademarks appearing herein are the property of their respective owners.
- Depends upon third-party device compatibility.
- WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm.
- For more information, go to www.P65Warnings.ca.gov.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>