LG SQC1 2.1 Channel 160W Sound Bar with Wireless Subwoofer User Guide

SIMPLE MANUAL
WIRELESS SOUND BAR

Installing and Using the Product

Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.

https://www.lg.com/global/ajax/common_manual

A Sound bar
B Function LED / Remote Control Receiver
C Wireless Subwoofer – Install it close to the sound bar.
D External Device – (Blu-ray player, game console, etc.)

1. Connect the sound bar to your TV via an optical cable.

2. If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the TV via an HDMI cable.

3. Connect to power in the following order: wireless subwoofer [ sound bar. Then, turn on the sound bar. When the connection is automatically established with the sound bar, the LED on the wireless subwoofer will light up in green.

4. Using the product with your TV
   1. Press the F button repeatedly or OPTICAL button once until the OPTICAL LED appears on the function LED.
   2.  On your TV’s settings, set the output speaker to [Optical] or [External Speaker].

5. Connecting the product to your smartphone via Bluetooth
   1.  Tap the Settings ****button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( )
   2. Press the F button repeatedly until the blinking Bluetooth LED appears on the function LED.
   3. Find and tap the product on your smartphone. The product appears as “LG SQC1 (XX)”.
   4. When the product is connected to your smartphone via Bluetooth, the Bluetooth LED turns on.

If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the case, connect them in the following order.

1. Press the Power ****button on the sound bar to turn it off.

2. Press the Pairing button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
   – If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.

3. Press the Power ****button on the sound bar to turn it on.

4. When the connection is established, you will see a green LED light on the back of the wireless subwoofer.

• Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference.
  Design and specifications are subject to change without notice.

Specification

Power consumption

• Refer to the main label.
  AC adapter

• Model : A931-230087W-M21

• Manufacturer : Dongguan Aohai Technology Co.,Ltd.

• Input : 100 – 240 V 50/60 Hz

• Output : 23.0 V 0 0.87 A
  Dimensions (W x H x D): Approx. 660.0 mm x 56.0 mm x 99.0 mm (26.0 inch x 2.2 inch x 3.9 inch)
  Bus Power Supply (USB): 5 V 0 500 mA
  Amplifier (Total RMS Output power): 160 W RMS

Industry Canada Statement

[For having wireless function (WLAN, Bluetooth,…)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B) / NMB-003(B)
IC Radiation Exposure Statement
[For having wireless function (WLAN, Bluetooth,…)]
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 nches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED  MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONSCOULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz frequency bands] i. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
ii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 52505350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
iii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 57255850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and
iv. [for devices operating in the band 5250-5350 MHz having an e.i.r.p. greater than 200 mW] antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly indicated.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

https://www.lg.com/global/ajax/common_manual

MFL71933326
2207_Rev01
www.lg.com
Copyright © 2023 LG Electronics Inc. All Rights Reserved.
LG Customer Information Center
1-888-542-2623
CANADA
Register your product Online!
www.lg.com

References

• opt.in - This website is for sale! - opt Resources and Information.
• port.in - This website is for sale! - Port Resources and Information.
• LG Electronics & Home Appliances | Shop Now | LG USA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>