TOPRO 814785 Taurus Hydraulic Walker Instruction Manual

June 12, 2024
TOPRO

TOPRO 814785 Taurus Hydraulic Walker

Product Information

  • Product Name: TOPRO Taurus H
  • Variants: Basic, Premium
  • Model Number: 814785
  • Gross Weight: 18 Kg
  • Safe Working Load (SWL): 150 Kg
  • Intended Use: The TOPRO Taurus H is a forearm walker designed to provide support to users with reduced balance and/or walking ability. It is intended for adult users and should be pushed, not pulled. The walker can be operated by the patient or an assistant. Height and weight restrictions apply.
  • Contraindications: Not suitable for persons with low strength in arms and legs, very poor balance, or considerable cognitive disabilities.
  • Product Label: Includes important information and identification details.

Product Usage Instructions

  1. Get to know your TOPRO product:
    • A. Forearm support
    • B. Release lever for height adjustment
    • C. Lever for adjustment of forearm support
    • D. Front wheels
    • E. Rear wheels
    • F. Foot brakes
    • G. Handles (Basic)
    • H. Adjustable handles (Premium)
    • I. Hand brake (Premium)
    • J. Brake cable (Premium)
    • K. Lock wheel for the handle (Premium)
    • L. Directional block (Premium)
    • M. Product label
  2. Safety precautions:
    • Walk straight and keep the walker as close to your body as possible.
    • Walk between the rear wheels, not behind them.
    • Do not modify the product as it may compromise safety and void the guarantee.
    • When stationary or parked, activate the parking brakes on both sides.
  3. Indoor use recommendation: The TOPRO Taurus H is designed and approved for indoor use on plain foundation. Exercise caution when using in private homes with narrow doorways, as the maximum width of the walker is 660 mm.

Congratulations with your choice of a new TOPRO walker Every TOPRO product is developed, designed and manufactured in Norway.

The product conforms to Medical

  • Device Regulation (EU) 2017/745. It is tested and approved according to EN ISO 11199-3:2005. On receipt of the goods, please check your product. If you have any queries, please contact your mobility shop or dealer immediately.
  • If you have problems reading this user manual, an electronic version is available on topromobility.com.

Intended use

  • The TOPRO Taurus H is a forearm walker, which shall give support to users with reduced balance and/or reduced walking ability. It is designed to be pushed, not pulled. The intended user is an adult.
  • Height and weight restrictions apply. The main user of the product is the patient him-/herself; however, the walker can also be operated by an assistant.
  • Contraindications: The product is not suitable for persons with low strength in arms and legs, with very poor balance, or with considerable cognitive disabilities.
  • The product is designed and approved for indoor use on plain foundation. We advise caution when using the TOPRO Taurus in private homes with narrow doorways, as the maximum width of the walker is 660 mm.
  • To get to know the forearm walker and learn how to use it properly, training by a professional is recommended.

The grey numbered circles in this user manual refers to the numbered information graphic and illustrations inside the cover

Get to know your TOPRO product

  • A Forearm support
  • B Release lever for height adjustment
  • C Lever for adjustment of forearm support
  • D Front wheels
  • E Rear wheels
  • F Foot brakes
  • G Handles (Basic)
  • H Adjustable handles (Premium)
  • I Hand brake (Premium)
  • J Brake cable (Premium)
  • K Lock wheel for the handle (Premium)
  • L Directional block (Premium)
  • M Product label

Safety

  • To give the right support and safety, walk straight and make sure the walker is kept as close to your body as possible (A). Walk between the rear wheels (B), not behind them (C).
  • Do not push the walker forward if the front wheels have stopped at an obstacle.
  • The walker may tilt and cause an accident.
  • Do not use the walker on stairs. Be careful when passing thresholds etc.
  • Be aware that some parts of the walker might feel hot or cold when exposed to extreme temperatures.
  • Be aware not to put your fingers in open holes or between stationary parts.
  • Check the brakes before use every time.
  • Do not modify the product as this might put your safety at risk and the guarantee will become void.
  • When stationary or parked, make sure the parking brakes on both sides are activated.
  • Do not use the walker to transport heavy loads or persons.
  • Do not use the walker on slippery surfaces.
  • Keep the walker away from fire and hot items.
  • Do not climb on the walker or let children play with it.

Assembling and adjusting

TOPRO Taurus H is delivered with two levels of equipment:
Basic (814785) Adjustable arm pads and brakes on all wheels. Delivered partly assembled. Assembling: Please follow the steps in illustration 3. Premium (814787) Has in addition to the basics adjustable handles and driving and parking brake on the handles. The rear wheels have a swing lock (directional block). Delivered completely assembled.

Height adjustment / Forearm supports / Handles

Height adjusting: Pull the release levers (A) upwards. Use a little body weight to press down to decrease the height or reduce the counterweight to increase the height. Release the levers at the required height.

Recommended height: Stand with relaxed shoulders and position your elbows at a 90-degree angle (B). The level of the forearm supports should align to the level of your elbows. To help ensure a correct posture, a professional should help you with the adjustment of the forearm supports and the handles.

Adjusting the forearm supports:
The forearm supports can be adjusted individually. Unscrew the lever under the forearm support (C) until the cushion is moveable. Adjust to the required position and tighten the screw. NB! If the lever protrudes, it can be dangerous. Pull it down and rotate it away to be safely hidden.
Adjusting the handles (TOPRO Taurus H Premium): Unscrew the lock wheel (D). Pull the handle (E) backwards or push it forwards and tilt it to the desired angle (F). After adjusting the handle,tighten the lock wheel (D). Be careful to not hurt your fingers in the process.

Foot brakes / Directional block

TOPRO Taurus H Basic – all wheels / TOPRO Taurus H

  • Premium – front wheels:
    Step on the foot brakes on the rear wheels (A) and when required also on the front wheels (B), until you hear a clicking sound. The wheels are now in the locked position (C). To release them, step on the top of the foot brake pedal.

  • TOPRO Taurus H Premium – rear wheels:
    Step on the foot brakes on the rear wheels (A) once until you hear a clicking sound. The wheels are now in the directional blocked position (E). Push the foot brakes further down until you hear a second click. The wheels are now locked (F). To release them, step on the top of the foot brake pedal (D).

  • Hand brakes
    (Taurus H Premium)
    Ensure the brakes are working properly before every trip. Do not drive or push the forearm walker while the parking brakes are activated or when the wheels are partly locked using the brakes.

  • Parking brakes: Push both brake levers forwards (A) to activate the parking brakes. Be aware that the lever has some resistance before it stops and locks the rear wheel. Pull both brake levers towards you to release the parking brakes.

  • Driving brakes: Pull both brake levers towards you (B) to reduce speed. It is a two-handed braking system, which means that the brake is activated for the rear wheel on the same side of the walker as the brake lever. When applying only one of the brakes, the walker will turn to the same side when walking. Releasing the lever will stop the braking. Do not continuously use the brakes when the walker is in motion.

  • Adjusting/checking: Loosen the nut (C). Tighten/loosen the brake cable with the adjustment screw (D). Ensure that the brakes are working properly and only touching the wheels when in use.
    Adjust the brakes evenly on both sides.

  • Maintenance: Inspect the brakes regularly by following the information above. For an optimal grip, wipe off the tires with a damp cloth. The wheels and brakes can be replaced if they are worn out or damaged.

  • Transport
    The walker can be transported either in vertical or in horizontal position. It should be set in the lowest height position to save space and facilitate handling. Ensure that the foot brakes are activated. Be careful when loading the walker into a vehicle, giving attention to securing it.

Storage
The walker should be stored indoors and in an upright position. Do not place heavy items on top of it while stowed away.

Cleaning
The walker can be hosed and washed with normal household detergents.
Do not use scrub detergents,steam- or high-pressure cleaners.

Troubleshooting

Brakes

  • Worn out / defect wheel –> Change the complete wheel
  • Not braking effectively –> Adjust the brake cables
  • Worn out / defect brake mechanism on wheel –> Change the entire back wheel section
  • Worn out / defect brake handle –> Change the complete brake handle
  • Worn out / damaged brake cable –> Change the brake cable

Height adjustment

  • The gas spring is worn out or damaged –> Change the gas spring
  • The height adjustment handle is maladjusted –> Adjust the handle

Disinfection
Disinfection must only be carried out by authorized personnel and by wearing sufficient protective equipment. The surface of the walker must be cleaned with a disinfectant containing 70–80 % ethanol. We advise against disinfectant that contains chlorine or phenol. The manufacturer cannot be held responsible for any damage or injuries that might occur using harmful disinfectant or disinfection carried out by unauthorized personnel.

Inspection / Maintenance / Re-use
The wheel bearings are sealed and maintained free. The parts do not need to be lubricated. It is recommended that inspection and maintenance are carried out regularly (frequency is determined by how and how often the walker is used). Check the following items: Tubes, frame, screws, handles, forearm supports, brakes, wheels and accessories. This also applies when the walker is to be prepared for re-use.
Please read detailed instructions about maintenance of brakes and cleaning/disinfection of the walker in this user manual.

Material / Recycling
The walker is made of plastic-coated aluminium tubes, plastic couplings, push handles of polyamide-6 and TPE, and forearm cushions made of polyurethane.
Most parts can be recycled.
Dispose the walker and its packaging according to the applicable regulations in your country. For information, please contact your public authorities.

Warranty

TOPRO Taurus H is guaranteed free of faults and defects for 2 years. Damage caused by incorrect use or parts that are exposed to natural wear and tear (e.g., brakes, wheels, and handles) are exempt from the 2-year warranty. For repairs during the warranty period, please contact your local mobility shop or dealer.
The warranty is void if unauthorised spare parts or accessories have been or are being used on the product. The expected lifespan of the product is estimated to be 10 years if it is used in the correct manner according to this user manual and its safety and maintenance instructions.

Product label

  1. Manufacturer
  2. Consult Instructions for use
  3. Model name
  4. Model number
  5. Maximum user weight
  6. Maximum height of walker
  7. Maximum width of walker
  8. Gross weight
  9. Intended for indoor use
  10. Medical Device
  11. CE marking
  12. Date of manufacture
  13. Serial number
  14. GS1 DataMatrix
  15. Global Trade Item Number
  16. Caution! – Read Instruction for use

Accessories

TOPRO Item No.

Accessories mounted on the walker may influence stability; we therefore advise you to use them with care. Accessories can be ordered separately to enable the forearm walker to be customised to individual needs. Contact your mobility shop, dealer or TOPRO for an updated overview of available accessories or visit our homepage topromobility.com.

TOPRO products are developed, designed and manufactured in Norway by:

TOPRO Industri AS
Rambekkveien 5, NO-2816 Gjøvik, Norway
(+47) 61 13 46 00
info@topromobility.com
www.topromobility.com

Learn more

topromobility.com

Art. No. User Manual: 104210 – Revision D, 2022-04

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals