NIZ X108EC Gaming Keyboard

Keyboard Function Illustrate

Menu for backlight

FN+| ****

~`

| ****

=

| Specific lights| Programming software definitions, press to in ， Shutdown

memory.

---|---|---|---|---

!1

| ****

Back color

| Every click RGB lights of the keyboard will loop switch between

red-green-blue-purple-green-white-off-sunset-relax; Shutdown memory.(sunset is warm colour,relax is cold

colour, dynamically)

@2

| Led effect color| Every click RGB lights of the keyboard will loop switch between red-green-blue-purple-green-white-random;

Shutdown memory.

3

| ****

Led effect mode

| Led effect select.the back color of effect are chosen by specific lights and back color switch; the color of effect are chosen by led effect color switch;the time lights stranded

are chosen by FN+_-/+=; Shutdown memory.

$4| Effect exit| Exit led effect mode; Shutdown memory.
F10| Backlight off| Open/Close backlight;Shutdown memory
↑| =| luminance +| Add luminance in 5 levels,regulate the indicator luminance

when close backlight;Shutdown memory.

↓| luminance –| Minus luminance in 5 levels,regulate the indicator

luminance when close backlight;Shutdown memory.

←| Direction left| Regulate the direction of led effect demo;Shutdown

memory.

→| Direction right| Regulate the direction of led effect demo; Shutdown

memory.

Special keys Function table

FN+| ****

ESC

| ****

=

| ****

Keyboard Lock

| Bluetooth version: Lock/Open the keyboard ； if the keyboard has been locked ， it won’t react to the press. The shutdown doesn’t memory

No Bluetooth version:press the switch in the upper left corner to lock/open the keyboard; Shutdown doesn’t

memory.

---|---|---|---|---
| ****

F9

| | Adjust trigger point| Adjustable Trigger point (high/fit/low stage) and indicator flash 1/2/3 times,

Shutdown memory.Default in fit trigger point.

---|---|---|---|---

L-Ctrl

| Caps/Ctrl

exchange

| Press 3 seconds to Achieve the exchange between “left

Ctrl” and “Caps”. The shutdown doesn’t memory

Win

| Win Lock| Press 3 seconds to Lock/Open Win,App key. Disable in

Mac OS; Shutdown memory

L-Alt

| ****

Win/Mac

| Press 3 seconds for indicator flash 2 times, Match Mac OS( Achieve the exchange between “left Win” and “Left Alt”, “Right Alt be place of Right Win”,“Menu be place of Right Alt”). Press 3 seconds for indicator flash 1 times, match Win OS(key to return), Shutdown

memory

Delete

| ****

BD1

| Long press 3s into pair status,BD1 led flash

quickly;short press into reconnect status,BD1 led flash slowly;shutdown memory

End

| ****

BD2

| Long press 3s into pair status,BD2 led flash

quickly;short press into reconnect status,BD2 led flash slowly;shutdown memory

Page Down

| ****

BD3

| Long press 3s into pair status,BD3 led flash quickly;short press into reconnecting status,BD3 led flash

slowly; shutdown memory

Insert

| ****

bluetooth start

| 1. keyboard link to adapt: Start or close Bluetooth 2. keyboard link to computer: Bluetooth mode/Wire of

USB swap,

Press the ”M” Key to exchange Office mode and Program mode, ”M” Light is turned off at Office mode, ”M” Light is turned on at Program mode. Shutdown memory.

Bluetooth Operation Instruction

The keyboard can be paired 3 Bluetooth devices, and the keyboard can be connected to different devices to achieve rapid connection by pressing the key. Keyboard reset and default to connect the last use of the device. If the keyboard is in the state of cable, you can switch to the Bluetooth state by FN+P; then one more time to click FN+Pto back to the cable mode.

1. Bluetooth indicator instruction:

   • The indicator flashes quickly, into pairing status.
   • The indicator flashes slowly, into reconnecting status.
   • The indicator is always on, int connected status .and after 5 seconds, the indicator is put out.

2. Bluetooth pair instruction:
   Before pairing, need to close the Bluetooth of the device that has paired to the keyboard. For example,After the completion of the Bluetooth 1 paired phone a, if you need to match the Bluetooth 2 and B cell phone, then need to first turn off the phone a Bluetooth, then FN+I long by 3S, Bluetooth indicator lights flash, open the phone B Bluetooth, Bluetooth keyboard selection, according to the prompts to enter pairing code and after pairing then open a phone’s Bluetooth. At this time through the FN+U/I short press, the connection of the mobile phone A/B switch. Similarly, if you need to Bluetooth 3 and mobile phone 3 pairing, you need to turn off the phone A, Bluetooth B mobile phone, until the completion of the pairing and then open it.

3. The following operation is an error operation:
   The keyboard has been connected, FN+U/I/O long-press the matching operation, the keyboard does not respond to the operation; FN+U/I/O short press the heavy even operation, if heavy even the equipment is not matched for the null device, the keyboard does not respond to the operation, the indicator light flash 2 under the return; (3) Connected devices have not been off, forced into the pairing operation, which is the keyboard will quickly connect to the paired devices, there will be 2 Bluetooth connections is the same device. At this time, please turn off the Bluetooth device, and then repairing one of the Bluetooth.

4. Battery indicator:
   The battery indicator is below in the F12button. Always on for charging; Always off for charging completion; flash for low power.

USB, PS/2 Interface settings
Press “FN + Backspace” for 5 seconds, indicator flash 1 time to USB, indicator flash 2 times to auto-identify for USB,PS/2.and restart the keyboard. The default settings is set to USB.

Bluetooth Sleep and Power down settings
Press “FN + T” for 5 seconds, indicator flash 1-3 times are power down time set to 1-3 hours.The default power down time is set to 1 hours.

Clear Key Counter
Press “FN + Delete” for 5 seconds, the indicator flash, and the key counter will be clear .

Restore factory settings
Press “ESC + L-ctrl + ~`+ Right” for 5 seconds will restore factory settings, and restore factory settings will restart the keyboard.

Keyboard configuration

There are two modes for the keyboard, OFFICE mode and Custom mode. OFFICE mode is also Standard mode, as for Custom mode, you can make different configurations to the keyboard, the details for how to configure and save under custom mode are in below.

NOTE:
Press the save of main screen to save the configure when the configure be completed.

How to configure the backlight

• Single click the “LightSet” Key in the main screen of Programming software, the dialog box of “Backlight settings panel” will pop out.
• Single press the “Set All” key, choose the color in the dialog box of “color” that pops out, and confirm. Then fast set up all the key colors as the chosen color.
• Single press the “Multi key” key, and the dialog box of “Set Multi Key panel” will pop

out, choose the key of needs to be set and it will show the chosen status. Then single press the key, choose the color in the dialog box of “color“ that pops out and confirm. Then set up many key color as the chosen color.
A single press on any key on the backlight interface, choose the color in the dialog box of that pops out and confirm. Then fast set up the chosen key color as the chosen color. Click into the Key after set up the backlight, and finish the setup for the custom backlight. Custom backlights are available under both modes. Exchange custom backlight and normal backlight with FN+.

Backlight settings interface

Set Multi Key interface

How to configure the keyboard:

Under OFFICE mode, press the “M” key on the top right corner, “M” light turns on, then goes into a custom mode of program1, the “M” light flashes, then goes into a custom mode of program2. And goes into the OFFICE mode in the light off.

All keys on the keyboard are divided into the None layer and Left FN layer and the Right FN layer, Left FN layer can output only when combined with Left FN, Right FN layer can output only when combine with Right FN. When finishing the setup of all keys in programming software, to save and synchronize the configuration with keys, single click the “WriteKeys” in the main screen. Single click the “Read configuration” in the main screen, it will read the standard configuration of OFFICE mode when under the OFFICE mode and read the custom configuration under custom mode. When the “M” light is on or flashing, the keyboard is under the custom mode, all the custom functions can be used.

Programming Software Main Interface

single key/ combine keys

1. Single click on the key you need to configure, click “Uni/ combo” in the “KeySettings” surface.
2. Choose “Single” or “Combo”, single click “Record” to record the keys, combine keys can record six at most.
3. single click “OK”.

Single/Combo keys surface

Macro definition

The keyboard can be defined in the overall definition under a custom mode and shows a strong programmable feature.

What is Macro
Macro is the whole series of actions that you can specify in order to the keyboard. Accurately speaking, a series key presses and key releases, recording every single time of the key press, release and delay. Among these, it can automatically input when delayed, that is all the time between press and release can automatically input.

How to define a macro?

1. Choose the key you need to configure, and click “macro ”;
2. Choose “New” on the left side of the appearing window;
3. Choose a new macro, select the style of output and automatic delay in the macro edit on the right side, then click “Record”, type the keys that need to be defined on the keyboard and click “Stop Rec”;
4. Single click “OK”.

How to set up delay

• Delay is the time between the press and the release of keys. the keyboard has an automatic delay record and can modify delay time:
• Set up automatic delay record: drive automatic records the time that typing actions need;
• Modify delay time(50ms-60000ms, 1000ms=1s): after defining a macro, single click the delay time two keys already have, then the delay time will become to be editable and edit the delay time .sigle click the other area of record list to exit the editable status.

How to insert mouse and delay
After recording a macro, right-click the key in the edit list, choose to operate insert mouse, and delay.

Macro definition key interface

Simulate keystroke

What is simulating keystroke?
Simulate keystroke is the function that after you click the simulate key, the keyboard will simulate the keystroke in a fast speed, it ends when the key bounce, it can also set up the speed of the keystroke.

How to set up a simulated keystroke?

1. Single click the key you need to configure, click “keystroke” in the “keys set up panel”;
2. Choose “New” in the left side of the appearing window;
3. Choose a new-built keystroke, set up the keystroke time in the edit list on the right side, single click “Record”, type in the keys that need define, then click “Stop Rec”, simulate keystroke can record six at most;
4. Single click “OK”.

simulate keystroke interface

Multi-Media

The keyboard supports the usual function of multi-media, custom multi-media simplifies the layout of the keyboard.

1. Single click the key you need to configure, single click “Multimedia”;
2. Choose custom multi-media in the multi-media interface, then click “OK”.

Mouse

The keyboard support Mouse.Unit Time refers to the time required by a mouse cursor to move to a cell; Unit Pixel refers to the number of pixels that move a cell in the mouse cursor; First Delay refers to the interval between the mouse cursor moving the first cell to the second cell.

1. Single click the key you need to configure, click “Mouse” in the dialog box of Key Settings that pops out;
2. Choose custom mouse functions in the mouse panel, then click “OK”.

Mouse interface

Function Key

The control key are divided into key function and backlight function.

1. Single click the key you need to configure, click “Funcion” in the dialog box of “key Settings” that pops out;
2. Choose custom functions in the control key panel, then click “OK”.

Function key interface

Power

The keyboard support power function.

1. Single click the key you need to configure, click “power” in the dialog box of “ KeySettings” that pops out;
2. Choose custom functions in the power panel, then click “OK”.

Power interface

Empty configuration

There are two circumstances for an empty configuration, one is an empty single key configuration, and the other is an empty all the configured keys. To empty a single key configuration, just single click the key and choose “Clear” in the set window. To empty all the configurations, single click “Clear” in the function bar on the main screen.

How to save and open configuration

Every configuration document corresponds to a kind of keystroke mode, so it will be more convenient for the users to configure the common programs of the keyboard. The configuration information includes a key set up information and backlight setup information. You can save those configurations that don’t need in a short time on your PC and direct import them next time when needed. This can avoid set up repeated. You can still import the documents saved in a PC when using another computer,

The specific ways are below:

Open the configuration

1. Single click “open” at the function bar in the main screen, choose the catalog and the corresponding configuration in the dialog box of open configuration that pops out.
2. Single click “Open”.

Save configuration

1. Single click “Save” at the function bar in the main screen, choose the catalog and type in the name of the configuration in the dialog box of save configuration that pops out.
2. Single click “Save”.

How to Get key usage times
Single click Counter at the function bar in the main screen, after reading the completion, the mouse moves to the corresponding button position, the information box can see the number of times the button is hit.

How to upgrade keyboard firmware
Upgrade keyboard firmware in order to improve the performance of the keyboard and the function that is designed for users’ experiences.

1. Single click “Get Version” and can get the firmware‘s name and version.
2. Single click “Open”, choose .bin document, and single click “Update”, then update the firmware of the keyboard with the tips.

upgrade keyboard firmware interface

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>