Elkedel MWC-180 retro Kettle Instruction Manual

Elkedel MWC-180 retro Kettle

Product Information

• Product Name: Kettle MWC-180 retro
• Capacity: 1.8 L
• Power: 1000 W
• Voltage: 220-240 V
• Weight: 1.2 kg

Product Usage Instructions

1. Place the device on a flat surface.
2. Fill the kettle with water, ensuring that the water capacity is not lower than the minimum level and not higher than the maximum level (use only cold water).
3. Ensure that the cover is completely closed.
4. Put the kettle on the power base.
5. Insert the plug into the socket.

First Use of the Machine

Before using the device for the first time, boil water and discard it twice.

Cleaning

• Always unplug the device before cleaning it.

Outside Cleaning

• If necessary, clean the outside of the machine with a damp cloth.

Inside Cleaning

1. Fill the kettle with water and add 2 ml of white vinegar.
2. Let the mixture boil.
3. Disconnect the device and empty the kettle.
4. Clean with water at least three times to remove any particles.

General Safety Instructions

• Before commissioning this device, please read the instruction manual carefully.
• Please save these instructions, the guarantee certificate, line sales receipt and, if possible, the carton with inner packaging.
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use.
• Remove the plug from the socket when you attaching accessory parts, cleaning the device or whenever a disturbance occurs.
• Switch off the device before you take out the plug. Pull always on the plug, not on the cable.
• In order to protect the children from the dangers of electrical appliances, never leave them unsupervised with the device. When you selecting the location for your device, do it in such a way that children do not have access to the device.
• This device is not intended for use by persons with limited physical, sensory or mental capacities.
• Test the device and the cable regularly for damage. If there is damage of any kind, the device should not be used.
• Do not repair the device, cord or plug yourself, but rather consult an authorized expert or the manufacturer.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp edges and similar.
• Use only original accessories.
• Do not use the device outdoors.
• Under no circumstances must the device be placed in water or other liquid. Do not use the device with wet or moist hands.
• Should the device become moist or wet, remove the mains plug from the socket immediately. Do not reach into the water.
• Use the device only for the intended purpose.
• Do not move the device while it’s functioning.

Instructions

1. Place the device on a flat surface.
2. Fill the water in the kettle, make sure that the water capacity is not lower than the minimum sign and not higher than the maximum sign (use only cold water).
3. Make sure the cover is completely closed.
4. Put the water can on the base.
5. Insert the plug into the socket.
   • Check if the electrical voltage you want to use is the same as the indication on the device. Details can be found on the label on the base.
   • Only connect the appliance to a grounded 230V~50/60Hz socket that has been correctly installed.
6. Place the can on the base.
7. Turn on the device, check if the indicator light is on.
8. When the water is being boiled, the device switches off automatically and the indicator light goes out.
9. Take the can from the base.
10. Ready to pour in the water.

First Use of the Machine

• Before you use the device for the first time, you must boil the water and throw it away twice.

Cleaning

• Always unplug the device wen you start cleaning.

Outside

• The outside of the machine must, if necessary, get cleaned with a damp cloth.

Inside

1. Fill the kettle with water and add 2 ml of white vinegar.
2. Let the water boil.
3. Take the can of the base and empty it.
4. Clean at least tree times with water to remove the particles

Overview

• A. Handle
• B. Spout
• C. Body
• D. Bottom cover of body
• E. Power base
• F. On/off switch
• G. Water gauge
• H. Cover

Recycling

This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

Declaration of conformity

Gimeg Nederland B.V. declares that the device MWC-180, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the backside of this manual.

Importer

• Gimeg Nederland B.V.
• Strijkviertel 27 3454 PH De Meern
• The Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>