boAt UM-01 Airdopes Zing Wireless Earbuds User Manual
- June 12, 2024
- Boat
Table of Contents
UM-01 Airdopes Zing
Wireless Earbuds
User Manual
UM-01 Airdopes Zing Wireless Earbuds
Get ready to immerse yourself in musical bliss with your very own pair of boAt
Airdopes Zing. Please consider this manual as your guiding map towards the
unparalleled shores of auditory realm. Knowledge of Biuetooth and device
connectivity is essential for steering this boat and therefore we strongly
recommend thorough reading of this manual. Also, you may refer to the same at
times when you face any sort of difficulty. 
PACKAGE CONTENTS
- 1x Pair of TWS ELITLIJW
- 1x Charging Case
- 1x Type-C Charging Cable
- 1x User Manual
- 1x Warranty Caro
- 1x Catalogue
- 1x FAO Card
OVERVIEW
- CTC (Capacitive Touch Control)
POWER ON (FIRST TIME USER)
Step 1: To switch the earbuds on (Smart Power On) simply open the lid of
the charging case (when earbuds are inside). Courtesy our (lnsta Wake N’ Pair)
technology, the earbuds power on automatically, get connected and enter the
connection mode
OR
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to
manually power on the earbuds
Step 2: After powering on, the earbud., enter the Connection Mode,
indicated by alternate red and blue LED flashes on primary earbud and blue LED
flashes once every 5 seconds on the secondary earbud
CONNECTION MODE
Stop 3: Turn on the Bluetooth functionality on your phone/media device
and scan
Step 4: Search for *Airdopes Zing’ and pair accordingly. Congratulations!
Your earbuds are now connected successfully via Bluetooth
Note.
- Pairing mode lasts for 5 minutes, If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure
- Airdopes Zing remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range.
SINGLE EARBUD USAGE
Step 1: Please note that both tho oarbuds can be used in mono mode. Use
Smart / Manual Power On for switching on the desired earbud
Step 2: The selected earbud automatically enters the connection mode
indicated by red and blue LED flashes
Step 3: Tum on Bluetooth on your phone/media device and search for
‘Airdopes Zing’ to connect
Notes:
- To switch to Stereo mode, simply take out the other earbud from the case It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
- You cannot skip tracks or return to the previous tracks in Mono (single-earbud) mode
QUICK GUIDE ON FUNCTIONALITIES
| 3 Seconds | Long touch either CTC for 3 sec to activate voice assistant | |
|---|---|---|
| 3 Seconds | Long touch both CTCs for 3 seconds to manually power on | |
| 5 Seconds | Long touch both CTCs for 5 seconds to manually power off | |
| 5 Seconds | Long touch both CTCs for 5 seconds to perform factory reset |
CHARGING THE EARBUDS
Step 1: Please insert the earbuds back inside the charging case in
correct orientation and close the lid.
Step 2: In charging status, the red LW turns on for 2 secs when case lid
gets opened. LED stays off when the lid stays closed.
Step 3: Once the earbuds get fully charged, the charging case
automatically switches off to save power, and the red LW stays turned off.
Note
- Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case Closed while charging.
CHARGING THE CASE
Step: To charge the case. plug one end of the provided cable into the case and
connect the other end to a computer/ wall adapter/ powerbank, etc.
Remaining case battery led Indications
| Casc | Normal State | Charging State |
|---|---|---|
| Low Battery | Red LED Winks thrice upon opening the cote lid | First shows the |
normal state then goes Into slow breathing red LED
30%-70% Battery| White LED blinks thrice upon warming the amend| First shows
the normal state then goes Into slow breathing white LED
70%-99% Battery| Green LED blinks thrice upon opening the case lid| First
shows the normal state then goes Into slow !nothing green LED
Fully Chargrad| LED stays off| Solid green LED
Case LED indication when Earbuds are getting charged from the case
This is to indicate the earbud getting charged from the case (when case lid
gets closed):
- CYAN for S seconds to indicate LEFT bud is charging from the Case
- PURPLE for 5 seconds to indicate RIGHT bud is charging from the Case
- If both are property charged, BLUE for 5 seconds
BASIC FUNCTIONS
- Voice Assistant: Long touch either CTC for 3 seconds to activate default voice assistant
- Answer: Single tap the CTC on either earbud to answer an incoming call
- Hang Up / Reject Call: Double tap the CTC on either earbud to end / reject call
- Play/Pause Music: Single tap either earbud’s CTC to play or pause music
- Next Track When playing music, double tap the right Garbutt’s CTC to skip to the next song
- Previous Track When playing music, double tap the left earbucts CTC to return to the previous song
Note:
- Volume can only be controlled via the media device
VOICE ASSISTANT
Step is Long touch the CTC on either earbud for 3 seconds to activate the
smart voice assistant Step 2. The respective voice assistant screen pops up
and you may place your commands at ease
Tips: You may try out the following commands,
- What Is the weather?
- Play a song
- Set a reminder
Note: If the voice assistant doesn’t get triggered, then the
functionality has to be first enabled via your media device settings.
ENx™ TECH
Our ENx” tech algorithm cancels out the background noise so that you can be
heard crystal clear via voice calls. One need not activate ENx'” as the quad
mics are equipped with the same and activated by default
Deliver your voice without interruptions anywhere – traffic, railway stations,
airports, work space; literally anywhere!
SMART POWER OFF
Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in correct
orientation and close the lid The earbuds automatically switch off (and enter
charging mode)
MANUAL POWER OFF
Step 1: Long touch either CTCs for 5 seconds to manually power off the
earbudr.
Step 2: Once the earbuds get turned off, place them back inside the case
and close the lid
FACTORY RESET
Perform the factory reset in case you feel any difficulty while operating your
Airdopes.
NOTE: Before performing reset, clear “Airdopes Zing” from pairing device
history by forgetting device.
Step 1: Take out the earbuds from the charging case, and icing touch the
CTC for 5 seconds on both the earbuds
Step 2: Place the earbuds Inside the Case (Earbuds will automatically
power-off in the charging case)
Step 3: Close the lid, wait for 5 seconds. After successful factory
reset, Red LED blinks quickly 5 times on Case and Earbuds.
Step 4: Take out the earbuds from the charging case and perform a fresh
connection
Note: To complete the factory reset, all of the above steps should be
performed Congratulations! Your Airdopes Zing has been Reset
SPECIFICATIONS
| Headphone Type | TWS |
|---|---|
| Bluetooth Version | V5.3 |
| Music Playtime | Up to 10 MRS per charge; Up to 65HRS additional with Case (at |
60% volume)
Standby Time| 6 months
Transmission Range| 10m
Driver Size| 13mm2
ENe4| Yes
ASAP”‘ Charge| Yes
Frequency| 20HZ-20KHZ
Battery| 500mAh (Case), 35mAh2 (Earbuds)
Charging Time| 40min (Earbuds); 1H 40min(Case)
Charging Interface| USB Type C
Water Resistance| IPXS
WARNING
- Please follow the instructions to operate
- Please don’t use the earbuds in extreme temperatures
- Please don’t use the product near water
- Please keep the proouct away from heat sources, as the heat may damage it
- Don’t jam the ports such as charger port. LED port, etc.
- It is recommended to utiltze the proouct below the maximum volume in order to protect hearing and extend the ear-buds: service life
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>