boAt Airdopes 141 Neo Wireless Earbuds User Manual

boAt Airdopes 141 Neo Wireless Earbuds

AIRDOPES 141 Neo
Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 141 Neo. Please consider this manual as your guiding map towards the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTENTS

• 1x Pair of TWS Earbuds
• 1x Type-C Charging Cable
• 2x Pair of Extra Earmuffs
• 1 FAQ Card
• 1x Charging Case
• 1x User Manual
• Warranty Card
• Catalogue

OVERVIEW

• CTC (Capacitive Touch Control)/ Power Button

POWER ON (FIRST TIME USER):

• Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when the earbuds are inside). Courtesy of our IP™M (Insta Wake N’ Pair) technology, the earbuds power on automatically. get connected and enter the connection mode OR Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds

• Step 2: After powering on, the earbuds enter the Connection Mode, Indicated by alternate red and blue LED flashes on the primary earbud and blue LED flashes once every 5 seconds on the secondary earbud
  CONNECTION MODE:

• Step 3: Turn on the Bluetooth functionality on your phone/media device and scan

• Step 4: Search for “Airdopes 141 Neo and pair accordingly. Congratulations Your earbuds aro now connected successfully via Bluetooth

Note

• Paining mode lasts for 3 minutes. IF the pairing time is missed then you will need to reconnect the ear-buds and follow the above mentioned procedure
• Airdopes 141 Neo remembers previously connected devices, once switched on, the ear-buds automatically reconnect to the previously connected devices

QUICK GLANCE ON FUNCTIONALITIES

SINGLE EARBUD USAGE

• Step 1; Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired earbud
• Step 2: The selected earbud will automatically enter the connection mode indicated by red and blue LED flashes
• Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 141 Neo’ to connect

Notes:

• To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage You cannot skip tracks or return to the previous tracks in Mono (single-earbud) mode

CHARGING THE EARBUDS

• Step 1: Please insert the earbuds back Inside the charging case in the correct orientation and close the lid
• Step 2: During charging, the earbuds LED indicator stays solid red
• Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power and earbuds’ red LED turns off

Notes:

• When the earbuds’ remaining battery is low, Red LED blinks 3 times when case lid gets opened When the remaining earbuds’ battery is between 30%-70%, blue LED blinks 3 times when the case lid gets opened
• Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging

CHARGE THE CASE

Step. To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adaptor/power bank, etc

REMAINING CASE BATTERY INDICATIONS

CASE-LED INDICATION WHEN EARBUDS ARE GETTING CHARGED FROM THE CASE
This is to indicate that the earbuds are getting charged from the case (when case lid gets closed)

• CYAN for 5 seconds to indicate LEFT bud is charging from the Case
• PURPLE for 5 seconds to indicate RIGHT bud is charging from the
• + If both are properly charged, BLUE for 5 seconds

BASIC FUNCTIONS

Voice Assistant: Long touch the left CTC for 3 seconds to activate defauit volce assistant.

• Answer: Single tap the CTC on either earbud to answer an incoming call.
• Hang Up / Reject Call: Double tap the CTC on either earbud to end / reject call,
• Play/Pause Music: Single tap either earbud’s CTC to play or pause music.
• Next Track: When playing music, doubie tap the right earbud’s CTC to skip to the next song
• Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song.

Note: Volume can only be controlled via the media device

BEAST™ MODE
Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST'” Mode. Once switched on, it gets notified via a sound prompt. Long touch the right CTC for 3 seconds once again, to turn it off and return to Music Mode. Made for the Gamers – By Gamers, BEAST™* Mode reduces the latency significantly and improves the overall gaming experience,

ENX™ TECH
Our ENx™ tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. Ono need not activate ENx™ as the mic is equipped with the same and activated by default. Deliver your voice without interruptions anywhere – traffic, railway stations, airports, work space; literally anywhere!

VOICE ASSISTANT

• Step 1: Long touch the CTC on left earbud for 3 seconds to activate default smart voice assistant.
• Step 2: The respective voice assistant screen pops up and you may place your commands at ease.

Tips: You may try the following commands,

• What is the weather?
• Play a song
• Set a reminder

Note: If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via vour media device settings.

SMART POWER OFF

• Step 1: After usage, remove both earbuds from your ears
• Stop 2: Place the earbuds back into the charging case in the correct orientation and close the lid The earbuds automatically switch off and enter charging mode).

MANUAL POWER OFF

• Step 1: Long-touch both CTs for 5 seconds to manually power off the earbuds.
• Step 2. Once the earbuds get turned off, place them back inside the case and close the lid

FACTORY RESET

Perform the factory reset in case you feel any difficulty while operating your Airdopes.

NOTE: Before performing reset, clear “Airdopes 141 Neo* from pairing device history by forgetting device

• Step 1: Take out both tho earbuds from the case and tap 5 times on both the CCs; red LED blinks quickly for 5 times on the earbuds
• Step 2: Place the earbuds inside the case and close the lid
• Step 3. After a few seconds take the earbuds out from the case and perform a fresh connection

The reset functionality gets completed once all the above 3 steps are performed. Congratulations! Your Airdopes 141 Neo has been Reset

SPECIFICATIONS

WARNING:

Please follow the Instructions to operate

• Please don’t use the ear-buds in extreme temperatures
• Please don’t use the product near water
• Please keep the product away from heat sources, as the heat may damage it Don’t iam the ports such as charder port LED port tc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life

Advisable: The earbuds start at a 100% volume and it may need to be reduced whon the earbuds are switched on at first. This can be done by using the phone/media device

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>