LUCiDE 10413/03/72 YUNKAI Pendant Light Instruction Manual
- June 12, 2024
- LUCIDE
Table of Contents
LUCiDE 10413/03/72 YUNKAI Pendant Light
Product Information:
Thank you for purchasing a Lucide original!
Lucide is a brand that offers trendy, high-quality, and affordable lighting
solutions. The product in question is the Yunkai model, an indoor ceiling
light fixture. The main material used is rotan, and the ceiling rose material
is metal. The color of the fixture is light wood and black, giving it a
cottage-style look. The dimensions of the fixture are LxWxH: 60 cm x 60 cm x
145 cm, with a weight of 2.40 kg. It comes with a 130 cm cable for
installation.
The Yunkai ceiling light has three light sources and uses E27 lamp sockets. It is dimmable and provides diffuse light in all directions. The fixture is adjustable in height and can be adapted to different installation requirements. It operates on a power supply of 220-240V~50Hz and has a maximum wattage of 60W. The Yunkai model comes with a 2-year warranty. For more detailed specifications, technical drawings, and dimensions of the Yunkai ceiling light, you can visit the Lucide website at www.lucide.com.
Product Usage Instructions
-
Safety Precautions: – The Yunkai ceiling light is designed for indoor use only, excluding bathrooms (unless the product has a higher IP rating suitable for bathroom use). – To ensure proper grounding, connect the green-yellow grounding wire to the designated grounding connection (marked with a symbol) if applicable. – Do not connect the product to an earth wire if it is designed for lower voltage (Class III). – If the
protective glass is damaged or broken, replace it immediately. – Maintain a minimum distance between the lamp and flammable objects. -
Installation: Please refer to the installation drawing specifications provided in the user manual or on the Lucide website for detailed instructions specific to the Yunkai model.
-
Dimming and Control: The Yunkai ceiling light is dimmable. To control the brightness, use a compatible dimmable light switch or system.
-
Maintenance and Cleaning: – Before cleaning the fixture, ensure that it is disconnected from the power source. – Use a soft, dry cloth to remove any dust or debris from the surface. – Avoid using harsh chemicals or abrasive materials that may damage the finish.
Please note that the user manual may contain additional information and instructions specific to the Yunkai ceiling light. For any further assistance or inquiries, please contact Lucide customer support or visit their website.
Item number: 10413/03/72
EAN code: 5411212105714
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!
Visit our website and discover our entire collection
CURIOUS ABOUT OUR BRAND?
Our brand video gives you a glimpse behind the scenes at Lucide
#ILLUMINATESYOURWORLD
Take a look at how others around the world use Lucide products
RECOMMENDED LUCIDE LIGHT SOURCE
49032/05/62 Dimmable: Yes Included: No
General
- Dimensions LxWxH: 60cm x 60cm x 145cm
- Height minimum: 50cm
- Height maximum: 145cm
- Main material: Rotan
- Ceiling rose material: Metal
- Color: Light wood and Black
- Style: Cottage
- Shape: Half-Round
- Weight: 2,40kg
Specifications
- Dimmable: Yes
- Light direction: Around (Diffuse)
- Adjustable in height: Adjustable In Height (Before Installation)
- Directional: Not Directional
- Cable: Yes, Cable On Product
- Cable length: 130cm
- Sensor: Without Sensor
- Control: Light Switch Control
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 2
- Number of light sources: 3
- Lamp socket: E27
- Maximum wattage: 60W
- Power requirements: 220-240V~50Hz
- Warranty: 2 Years
TECHNICAL DRAWING & DIMENSIONS
For more specifications or dimensions of this product please visit www.lucide.com
INSTALLATION DRAWING SPECIFICATIONS
Item number: 10413/03/72 EAN code: 5411212105714
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or
repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor,
outdoor, bathroom (for outdoor and bathroom installa-tion, please see
further). Indoor items cannot be used in humid places. Do not put the item in
contact with water or any liquids or inflammable products. Always respect the
minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged
by sharp edges. If the external flexible cable is damaged, it needs to be
replaced exclusively by the manufacturer, his service agent, or a qualified
electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must
cool down before being touched. Always use the correct bulb (respect type and
maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating
separate collection of such equipment must be returned to a municipal waste
collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.
For more specifications or dimensions of this product please visit www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com
tel: +32(0)3 366 22 04
www.lucide.com