LUCiDE 47506/81/38 RAMZI Table Lamp Instruction Manual

June 12, 2024
LUCIDE

LUCiDE 47506/81/38 RAMZI Table Lamp

Product Information

Thank you for purchasing a Lucide original! Our brand offers trendy, high- quality, and affordable lighting. Explore our entire collection on our website and get inspired by how others around the world use Lucide products. Stay updated with the latest lighting trends by following us on social media.

Recommended Lucide Light Source

  • Dimmable: Yes
  • Included: No
  • Item Number: 47506/81/38
  • EAN Code: 5411212470171

General Information

  • Dimensions (LxWxH): 18cm x 18cm x 26cm
  • Main Material: Ceramics
  • Color: Cream
  • Style: Cottage
  • Shape: Round
  • Weight: 0.50 kg

Specifications

  • Dimmable: No
  • Light Direction: Up light & Downlight
  • Adjustable in Height: Not In Height Adjustable
  • Directional: Not Directional
  • Cable: Yes, Cable With Plug On Product
  • Cable Length: 130 cm
  • Sensor: Without Sensor
  • Control: On/Off Switch – In The Cord
  • Power Supply: Adapter/Power Grid
  • IP-Class: 20
  • Electric Class: 1
  • Number of Light Sources: 1
  • Lamp Socket: E14
  • Maximum Wattage: 40 W
  • Power Requirements: 220-240 V~50 Hz
  • Warranty: 2 Years

Technical Drawing & Dimensions

  • Item Number: 47506/81/38
  • EAN Code: 5411212470171

Installation Drawing Specifications

  • Item Number: 47506/81/38
  • EAN Code: 5411212470171

Safety Instructions

This item is only suitable for indoor use, excluding the bathroom unless a higher IP degree permits its usage in the bathroom.

IP 44 refers to the item’s protection against solid objects greater than 1mm and water splashes from any direction. Legislation requires the collection and recycling of all electrical and electronic equipment. Items marked with the symbol for separate collection should be returned to a municipal waste collection point. Class I indicates that the product is grounded. The grounding wire (green-yellow) must be connected to the mass connection marked with the symbol.

Class III indicates that the product is suitable for lower voltage supply and should not be connected to the grounding wire.
IP 20 provides protection against contact with a finger.
If the protective glass is damaged or broken, it must be replaced immediately.
Respect the minimum distance between the lamp and flammable objects.
For more specifications, dimensions, and information about this product, please visit www.lucide.com.

Product Usage Instructions

  1. Ensure that the product is suitable for indoor use and meets  the necessary safety requirements.
  2.  Check the recommended Lucide light source specifications. The product is designed to accommodate an E14 lamp socket with a maximum wattage of 40 W.
  3.  Before installation, carefully unpack the product and verify that all components are included.
  4. Identify a suitable location for installation. Keep in mind the dimensions of the product (18cm x 18cm x 26cm) and the desired lighting direction (uplight and downlight).
  5. Connect the cable with plug on the product to a power source. The cable length is 130 cm.
  6.  If applicable, adjust the height of the product according to your preference.
  7. Use the on/off switch located on the cord to control the lighting.
  8.  Ensure that the protective glass is intact and undamaged. If it is damaged or broken, replace it immediately.
  9. Maintain a safe distance between the lamp and any flammable objects.
  10. Enjoy your Lucide original and the illumination it brings to your space!

Lu C D E

General
Dimensions LxWxH: 18cm x 18cm x 26cm Main material: Ceramics

  • Color: Cream
  • Style : Cottage
  • Shape: Round
  • Weight: 0,50kg

Specifications

  • Dimmable : No
  • Light direction : Uplight & Downlight Adjustable in height: Not In Height Adjustable Directional: Not Directional
  • Cable: Yes, Cable With Plug On Product Cable length : 130cm
  • Sensor : Without Sensor
  • Control : On/Off Switch – In The Cord
  • Power supply : Adapter/Power Grid
  • IP-Class : 20
  • Electric Class : 1
  • Number of light sources : 1
  • Lamp socket : E14
  • Maximum wattage : 40W
  • Power requirements: 220-240V~50Hz Warranty : 2 Years

For more specifications of this product please visit www.lucide.com

RAMZI

For more specifications or dimensions of this product please visit www.lucide.com

RAMZI

Safety Instructions
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks.Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

 This item is only suitable for indoor use, exclusive bathroom(except if a higher IP degree permits that the item can be used in the bathroom).
   Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
Class I : The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III : The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20 : Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration
Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.

Exclusions for the warranty

  1. Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
  2.  Normal wear and tear, discoloring as a result from normal use.
  3.  Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product. For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.

Further explanations can be found on our website.www.lucide.com

DISCOVER OUR COLLECTION!
Visit our website and discover our entire collection
LUCIDE-49006-05-30-original-Dimmable-01 CURIOUS ABOUT OUR BRAND?
Our brand video gives you a glimpse behind the scenes at Lucide
LUCIDE-49006-05-30-original-Dimmable-02 #ILLUMINATESYOURWORLD
Take a look at how others around the world use Lucide products
LUCIDE-49006-05-30-original-Dimmable-03

LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM info@lucide.com tel: +32(0)3 366 22 04 www.lucide.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals