LUCiDE 45274/02/02 TYCHO Wall Light or Lamp Instruction Manual

LUCiDE 45274/02/02 TYCHO Wall Light or Lamp

Product Information

• Brand: Lucide
• Model: Tycho
• Item Number: 45274/02/02
• EAN Code: 5411212450937
• Dimensions (LxWxH): 12cm x 15cm x 24.5cm
• Main Material: Steel
• Ceiling Rose Material: Steel
• Color: Matt Gold/Brass and Smoke Grey
• Style: Retro
• Shape: Other
• Weight: 0.41kg
• Dimmable: Yes
• Light Direction: Around (Diffuse)
• Adjustable in Height: Not Adjustable
• Directional: Not Directional
• Cable: No Cable On Product
• Sensor: Without Sensor
• Control: Light Switch Control
• Power Supply: Adapter/Power Grid
• IP- Class: 20
• Electric Class: 2
• Number of Light Sources: 2
• Lamp Socket: G9
• Maximum Wattage: 28W
• Power Requirements: 220-240V~50Hz
• Warranty: 2 Years

Product Usage Instructions

1. Ensure that the product is suitable for indoor use only, excluding the bathroom.
2. Before starting the installation, make sure to collect all the necessary tools and equipment.
3. Follow the installation drawing specifications provided in the manual to properly install the Tycho light fixture.
4. The product does not come with a cable on the product, so you will need to connect it to an existing electrical cable or hire a professional electrician for installation.
5. The Tycho light fixture is dimmable, allowing you to adjust the brightness according to your preference.
6. The light direction is around (diffuse), providing a uniform illumination in all directions.
7. The height of the fixture is not adjustable, so ensure to choose a suitable location for installation.
8. The Tycho light fixture is not directional, meaning it provides an ambient lighting effect.
9. The lamp socket used in this fixture is G9, which is compatible with G9 bulbs with a maximum wattage of 28W.
10. It is important to respect the minimum distance between the bulb and any flammable objects to ensure safety.
11. In case the protective glass is damaged or broken, it should be immediately replaced.
12. The product has an IP-Class of 20, offering protection against touch with a finger.
13. For any additional specifications or dimensions, refer to the technical drawing and dimensions provided in the manual or visit the Lucide website.

Please note : The text contains some additional information in different languages, which can be ignored for the purpose of this response.

RECOMMENDED LUCIDE LIGHT SOURCE

• 49026/03/31
• Dimmable: Yes
• Included: No

General

• Dimensions LxWxH: 12cm x 15cm x 24,5cm
• Main material: Steel
• Ceiling rose material: Steel
• Color: Matt Gold / Brass and Smoke Grey
• Style: Retro
• Shape: Other
• Weight: 0,41kg

Specifications

• Dimmable: Yes
• Light direction: Around (Diffuse)
• Adjustable in height: Not In Height Adjustable Directional: Not Directional
• Cable: No Cable On Product
• Sensor: Without Sensor
• Control: Light Switch Control
• Power supply: Adapter/Power Grid
• IP-Class: 20
• Electric Class: 1
• Number of light sources: 1
• Lamp socket: G9
• Maximum wattage: 28W
• Power requirements: 220-240V~50Hz Warranty: 2 Years

TECHNICAL DRAWING & DIMENSIONS

INSTALLATION DRAWING SPECIFICATIONS

Safety Instructions

• Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
• Always isolate the power before commencing installation, maintenance or repair.
• In case of doubts, please contact a qualified electrician.
• Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
• During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
• This is to avoid all risks.
• Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

• This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
• Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
• Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
• Class II: The item is double insulated and must not be connected to the earth wire.
• Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
• IP 20: Protection against contact with a finger
• If the protection glass is damaged or broken, it needs to be replaced immediately.
• Please respect the minimum distance from the bulb to inflammable objects.

DISCOVER OUR COLLECTION!
Visit our website and discover our entire collection
CURIOUS ABOUT OUR BRAND?
Our brand video gives you a glimpse behind the scenes at Lucide #ILLUMINATESYOURWORLD
Take a look at how others around the world use Lucide products

LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM [email protected] tel: +32(0)3 366 22 04
www.lucide.com

References

• Lucide lighting - Illuminates your world.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>