LUCiDE 45200/01/33 BONNI Wall Lamp Instruction Manual

: June 12, 2024
: LUCIDE

Table of Contents

LUCiDE 45200/01/33 BONNI Wall Lamp
Product Usage Instructions
General
Specifications
TECHNICAL DRAWING & DIMENSIONS
INSTALLATION DRAWING SPECIFICATIONS
Safety Instructions
Explanation of the symbols which can appear on the fixture
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUCiDE 45200/01/33 BONNI Wall Lamp

LUCiDE-45200-01-33-BONNI-Wall-Lamp-product-image

Product Information

Brand: Lucide
Model: Bonni
Style: Retro
Shape: Rectangle
Main Material: Steel
Color: Green and Opal
Dimensions (LxWxH): 24 cm x 12.5 cm x 12 cm
Weight: 0.69 kg
Dimmable: Yes
Light Direction: Around (Diffuse)
Adjustable Height: Not Height Adjustable
Directional: Not Directional
Cable: No Cable On Product
Sensor: Without Sensor
Control: Light Switch Control
Power Supply: Adapter / Power Grid
IP-Class: 20
Electric Class: 1
Number of Light Sources: 1 -Lamp
Socket: G9
Maximum Wattage: 28W
Power Requirements: 220-240V~50Hz
Warranty: 2 Years

Product Usage Instructions

Ensure that the product is suitable for indoor use only, excluding bathrooms (unless a higher IP degree permits bathroom use).
Make sure to properly collect and recycle electrical and electronic equipment, as required by legislation.
For products with this symbol, connect the grounding wire (green-yellow) to the mass connection.
For products classified as Class III, ensure that they are only connected to lower power voltage and not to the grounding wire.
The product has an IP 20 protection against contact with a finger.
If the protective glass is damaged or broken, it should be immediately replaced.
Respect the minimum distance between the lamp and flammable objects.

For more detailed specifications, dimensions, technical drawings, and warranty information, please visit the Lucide website at www.lucide.com.

RECOMMENDED LUCIDE LIGHT SOURCE

49026/03/31
Dimmable: Yes
Included: No

General

Dimensions LxWxH: 24cm x 12,5cm x 12cm Main material: Steel
Color: Green and Opal
Style: Retro
Shape: Rectangle
Weight: 0,69kg

Specifications

Dimmable: Yes
Light direction: Around (Diffuse)
Adjustable in height: Not In Height Adjustable Directional: Not Directional
Cable: No Cable On Product
Sensor: Without Sensor
Control: Light Switch Control
Power supply: Adapter/Power Grid
IP-Class: 20
Electric Class: 1
Number of light sources: 1
Lamp socket: G9
Maximum wattage: 28W
Power requirements: 220-240V~50Hz Warranty: 2 Years

TECHNICAL DRAWING & DIMENSIONS

INSTALLATION DRAWING SPECIFICATIONS

Safety Instructions

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.

DISCOVER OUR COLLECTION!
Visit our website and discover our entire collection
LUCiDE-45200-01-33-BONNI-Wall-Lamp-01 CURIOUS ABOUT OUR BRAND?
Our brand video gives you a glimpse behind the scenes at Lucide #ILLUMINATESYOURWORLD
Take a look at how others around the world use Lucide products