LUCIDE 45386-20-62 Maloto Pendant Lamp Installation Guide

June 12, 2024
LUCIDE

LUCIDE 45386-20-62 Maloto Pendant Lamp

LUCIDE-45386-20-62-Maloto-Pendant-Lamp-product

Product Information

  • Brand: Lucide – Model: MALOTO
  • Style: Retro
  • Shape: Cylinder
  • Color: Amber and Matt Gold/Brass – Main
  • Material: Glass
  • Ceiling Rose Material: Metal
  • Weight: 1.50 kg
  • Dimensions (LxWxH): 20 cm x 20 cm x 150 cm
  • Minimum Height: 50 cm
  • Maximum Height: 150 cm
  • Dimmable: Yes – Light Direction: Around
  • (Diffuse) – Adjustable
  • Height: Yes, adjustable before installation
  • Directional: Not directional
  • Cable: Yes, cable on the product
  • Cable Length: 114 cm
  • Sensor: Without the sensor
  • Control: Light switch control
  • Power Supply: Adapter/Power Grid
  • IP-Class: 20 (Protected against solid objects over 12.5 mm in size, no
  • protection against water)
  • Electric Class: 1 (Requires grounding)
  • Number of Light Sources: Lamp Socket: E27 –
  • Maximum Wattage: 40 W
  • Power Requirements: 220-240 V~50 Hz
  • Warranty: 2 Years

Product Usage Instructions

  1. Safety Precautions: This product is suitable for indoor use only, excluding bathrooms unless a higher IP rating allows for bathroom use.
  2. Ensure proper disposal of electrical and electronic equipment according to local regulations.
  3. The product is Class I, meaning it requires grounding. Connect the green-yellow grounding wire to the designated grounding point.
  4. The product is Class III and should only be used with lower voltage power supplies.
  5. Do not connect to the grounding wire.
  6. Installation: – Refer to the installation drawing specifications provided in the manual or visit the Lucide website for more details.
  7. Follow the provided technical drawing and dimensions to install the product correctly.
  8. Maintenance: If the protective glass is damaged or broken, replace it immediately.
  9. Maintain the minimum distance between the lamp and flammable objects to prevent accidents
  10. For more detailed specifications or dimensions, please visit the Lucide website at www.lucide.com.

Thank you for purchasing a Lucide original! This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality, and affordable lighting. Welcome to the community of illuminates your world.

RECOMMENDED LUCIDE LIGHT SOURCE
49042/05/62 Dimmable: Yes Included: No

General

  • Dimensions LxWxH: 20cm x 20cm x 150cm
  • Height minimum: 50cm
  • Height maximum: 150cm
  • Main material: Glass
  • Ceiling rose material: Metal
  • Color: Amber and Matt Gold / Brass
  • Style: Retro
  • Shape: Cylinder
  • Weight: 1,50kg

Specifications

  • Dimmable: Yes
  • Light direction: Around (Diffuse)
  • Adjustable in height: Adjustable In Height (Before Installation)
  • Directional: Not Directional
  • Cable: Yes, Cable On Product
  • Cable length: 114cm
  • Sensor: Without Sensor
  • Control: Light Switch Control
  • Power supply: Adapter/Power Grid
  • IP-Class: 20
  • Electric Class: 1
  • Number of light sources: 1
  • Lamp socket: E27
  • Maximum wattage: 40W
  • Power requirements: 220-240V~50Hz Warranty: 2 Years

MALOTO

LUCIDE-45386-20-62-Maloto-Pendant-Lamp-fig-2LUCIDE-45386-20-62-Maloto-Pendant-Lamp-fig-3

Safety Instructions

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance, or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).

Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating a separate collection of such equipment must be returned to a municipal waste collection point.

Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).

Class II: The item is double insulated and must not be connected to the earth wire.

Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.

IP 20: Protection against contact with a finger

If the protection glass is damaged or broken, it needs to be replaced immediately.

Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user if the item is installed and maintained properly as mentioned in the user manual.

Exclusions for the warranty

  1. Broken glass parts of the fixture will only be replaced within 14 days after purchase by the end user.
  2. Normal wear and tear, and discoloring as a result of normal use.
  3. Damage is caused by external causes like fire, water, wrong use/ installation, or maintenance of the product. For warranty claims, the customer needs to hand over the defective fixture/part and the original purchase ticket.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals