moulinex BY883D10 Majestic Kettle Instruction Manual

: June 12, 2024
: moulinex

Table of Contents

Moulinex BY883D10 Majestic Kettle
Product Information
Product Usage Instructions
SAFETY INSTRUCTIONS
BEFORE USING FOR THE FIRST TIME
USE
RECOMMENDED TEMPERATURES
CLEANING AND MAINTENANCE
CLEANING THE FILTER
DE-SCALING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Moulinex BY883D10 Majestic Kettle

Product Information

The Majestuo Kettle is a versatile and efficient kitchen appliance designed for indoor, domestic use. It features a sleek and modern design with a convenient handle for easy pouring. The kettle includes various safety features such as an automatic shut-off function and a removable anti-scale filter to ensure a safe and enjoyable user experience. With its large capacity and rapid boiling capabilities, the Majestuo Kettle is perfect for making hot beverages quickly and easily.

Product Usage Instructions

Before using the kettle for the first time, carefully read the instructions for use are provided in the user manual.
Remove all packaging materials, stickers, and accessories from both the inside and outside of the kettle.
Place the base on a flat, stable, and heat-resistant surface away from water splashes and any sources of heat.
Position the kettle on its base and plug it into a mains socket.
To start the kettle, place it on the base. All the lights will illuminate for 1 second, and then the water temperature in the kettle will be displayed on the screen.
The kettle will switch off automatically once the keep warm function ends.
To clean the kettle, carefully clean the lid and the removable filter regularly. The filter helps retain particles of scale and should be cleaned when it becomes clogged.
If any problems occur with the kettle, such as it not starting heating or the control panel lights being off, refer to the malfunction description in the user manual for possible causes and solutions.
If descaling is required due to stubborn scale build-up, follow the descaling instructions provided in the user manual or consult a professional service center.
Always follow the safety instructions provided in the user manual to prevent accidents and ensure the safe use of the kettle.

Temperature selection: 40°- 50 °- 60°- 70°- -80°- 85°- 90°- 95°- 100 ° The previously selected temperature is stored in memory
Button to increase the selected temperature Button to decrease the selected temperature
The button to start/stop heating process the lighted text means the available action
Keep warm is activated automatically once the heating process is finished
Read the instructions for use carefully before using your appliance for the first time: This product has been designed for indoor, domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.

SAFETY INSTRUCTIONS

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Keep the appliance and its power cord out of reach of children under 8 years of age.
This appliance may be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, provided they are supervised or have received instruction to use the appliance safely and understand the dangers.
Children should not use the appliance as a toy.
This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved. Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
Your appliance was designed for domestic use only.
It is not intended to be used in the following cases, which are not covered by the guarantee.
In kitchens reserved for staff use in shops, offices and other professional environments;
On farms;
By hotel or motel clients, or on other residential premises;
In bed and breakfast accommodation and other similar environments.
Never fill the kettle past the maximum water level mark, nor below the minimum water level mark.
If the kettle is too full, some water may spray out.
Warning: Never open the lid when the water is boiling.
Your kettle should only be used with its lid locked, with the base and the anti-scale filter supplied.
Never immerse the kettle, its base or the power cord and plug in water or any other liquid.
Never use the kettle if the power cord or the plug are damaged. Always have them replaced by the manufacturer, its after-sales service or similarly qualified persons in order to avoid danger.
Children should be supervised to ensure that they do not play with the appliance.
Children should not clean or perform maintenance procedures on the appliance unless they are supervised by a responsible adult.
WARNING: Be careful to avoid any spillage on the connector during cleaning, filling or pouring.
Always follow the cleaning instruction to clean your appliance;
Unplug the appliance.
Do not clean the appliance while hot.
Clean with a damp cloth or sponge.
Never immerse the appliance in water or put it under running water.
WARNING: Risks of injuries if you do not use this appliance correctly.
Only use your kettle for boiling drinking water.
WARNING: The heating element surface is subjected to residual heat after use.
Be sure to manipulate only the handle during heating until completely cool.
Your appliance is intended for domestic use inside the home only at an altitude below 1000 m. With the increase of height above 500m, the corresponding injection volume should be reduced in proper capacity to prevent boiling water splashing out
The preselected temperatures are given for a product use below an altitude of 1000m. Above this altitude, the maximum temperature displayed at end of cycle on the product will be the boiling temperature matching with the altitude of use.
For your safety, this appliance meets applicable standards and regulations (Directives on Low Voltage, Electromagnetic Compatibility, Materials in contact with food articles, Environment, etc.).
Only plug the appliance into an earthed mains outlet. Check that the voltage indicated on the rating plate of the appliance corresponds to that of your electrical installation.
Any connection error will invalidate your guarantee.
The guarantee does not cover kettles that fail to operate or operate badly due to a failure to descale the appliance regularly.
Do not let the power cord hang where children may reach it.
Never disconnect the plug by pulling on the power cord.
Any intervention other than normal cleaning and maintenance by the customer must be performed by an Approved Service Centre.
All appliances are subject to strict quality control procedures. These include actual usage tests on randomly selected appliances, which would explain any traces of use.
Never use scouring pads for cleaning purposes.
To remove the scale filter, remove the kettle from its base and leave it to cool down. Do not remove the filter when the appliance is filled with hot water.*
Do not use any method to descale the kettle other than that recommended.
Keep the kettle and its power cord away from any source of heat, from any wet or slippery surface and away from sharp edges.
Never use the appliance in a bathroom or close to a water source.
Never use the kettle when your hands or feet are wet.
Always unplug the power cord immediately if you observe any anomaly during operation.
Never pull on the power cord to remove it from the wall socket.
Always remain vigilant when the appliance is on, and in particular be careful of the steam coming out of the spout which is very hot.
Never leave the power cord hanging from a table top or kitchen counter to avoid any danger of it falling to the floor.
Never touch the filter* or the lid when the water is boiling.
Also be careful as the body of stainless steel kettles becomes very hot during operation. Only touch the handle of the kettle.
Never move the kettle when it is in operation.
Protect the appliance from damp and freezing conditions.
Always use the filter* during heating cycles.
Never heat the kettle when it is empty.
Place the kettle and its power cord on a stable, heat proof and water resistant surface.
The guarantee covers manufacturing defects and domestic use only. Any breakage or damage resulting from a failure to comply with these instructions for use is not covered by the guarantee.

BEFORE USING FOR THE FIRST TIME

Remove all of the various packaging, stickers or accessories from both the inside and outside of the kettle.
Adjust the length of the cord by winding it under the base. Wedge the cord into the notch. (fig 1) Throw away the water from the first two/three uses as it may contain dust. Rinse the kettle.

USE

TO OPEN THE LID

Press on the locking system and the lid lifts automatically. (fig 2) To close, press down firmly on the lid.

PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM WATER SPLASHES AND ANY SOURCES OF HEAT.

The kettle is only to be used with the base provided.
FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. (fig 3)
Never fill the kettle when it is on its base.
Do not fill it above the maximum level, or below the minimum level. If the kettle is too full,
boiling water may spill out.
Do not use without water.
Check that the lid is closed properly before use.
POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.

TO START THE KETTLE

When the kettle is placed on the base, all the lights illuminate for 1 second. Then the water temperature in the kettle is displayed on-screen and the , and button illuminate.

TO HEAT WATER: (fig 4)

Select the temperature by pressing and . 9 possible settings: 40°- 50 °- 60°- 70°- -80°- 85°- 90°- 95°- 100 ° – press the lighted start button or wait for 5 blinkings, the kettle starts heating process. Once the heating process begins, start button turns off and stop button illuminates.
Every time the heating process begins, the selected temperature is stored in the memory. And when you next put the kettle on the power base for the next heat, it is possible to heat it using the last selected temperature by pressing the . You can monitor the live temperature of the water on the screen.
Once the selected temperature is reached, the kettle beeps twice and enter into keep warm mode automatically for 30 min.
If you wish to turn off the heating programs, just press the lighted stop button.

PLEASE NOTE

After 90°C, the kettle will boil water, stop, then restart boiling water. This circulation will happen several times and continue to the end of the heating process. This is a normal phenomenon, not a mal function.

KEEP WARM MODE

The kettle enters into Keep warm mode automatically after the selected temperature is reached.
No need other manual action. The keep warm mode lasts 30 min for the selected temperature, the count down timing and the selected temperature show on the screen alternatively. Once the keep warm mode reaches its cycle, the kettle beeps twice.
If you select 100°C, the keep warm function will keep the temperature at 95°C for 30 min.
During the keep warm mode, if the kettle is taken away and then put back on the base, it is possible to continue the keep warm mode by pressing the button.
If you wish to turn off the keep warm program within 30 min, please press the lighted stop button

PLEASE NOTE

The screen automatically switches off after 30 seconds without touching the buttons, but pressing the white dot between Start and Stop buttons will turn the screen on again at anytime.
You can also press the white dot button for 2 seconds to stop the ongoing process and switch off the screen immediately.
If the temperature of the water in the kettle is higher than the temperature you select when pressing , the heating won’t start.
For instance, if the water temperature is 90°C, you won’t be able to launch the heating by selecting 40°C, 70°C or 80°C.

RECOMMENDED TEMPERATURES

40°C: baby milk
70°C : white tea
80°C : green tea
90°C : freshly ground coffee
100°C: boiling water/infusions

THE KETTLE WILL SWITCH OFF AUTOMATICALLY ONCE THE KEEP WARM FUNCTION ENDS

Do not leave water in the kettle after use as this quickens the formation of scale.

CLEANING AND MAINTENANCE

CLEANING YOUR KETTLE Unplug it.

Let it cool down and clean it with a damp sponge.
Never immerse the kettle, its base, the cord or the electric plug in water: the electrical connections or the switch must not come into contact with water.
Do not use scouring pads.
Do not wipe the display while plugged in, it may cause unexpected start-up.
Please note that the silicone seal on the lid is not removable, do not pull on the seal when cleaning the lid.

CLEANING THE FILTER

(fig 5)

The removable filter consists of a mesh to retain the particles of scale and prevent them falling into your cup when pouring. This filter neither treats nor removes the hardness of the water. It thus conserves all the qualities of the water. With very hard water, the filter can clog very quickly (10 to 15 uses). It is important to clean it regularly. Sometimes the scale will not detach itself; it will then need descaling.

DE-SCALING

De-scale regularly, preferably at least once a month or more frequently if your water is very hard.
Temperature detection in the kettle may be affected by limescale.

To de-scale your kettle:

Using white vinegar which can be bought from hardware stores:
Fill the kettle with ½ litre of white vinegar,
Leave to stand for 1 hour without heating.

Using citric acid:

Boil ½ litre of water,
Add 25 g of citric acid and leave to stand for 15 min.
Empty your kettle and rinse 5 or 6 times. Repeat if necessary.

To de-scale your filter:

Soak the filter in white vinegar or diluted citric acid.
Never use a de-scaling method other than that recommended.

IN THE EVENT OF PROBLEMS THERE IS NO EVIDENT DAMAGE TO YOUR KETTLE

The kettle does not work
Check that your kettle is properly connected.
The kettle has been switched on without water or an accumulation of scale has caused the overheat cut-out to operate: allow the kettle to cool and fill it with water. Descale first if scale has accumulated.
Switch it on: the kettle should start working again after about 15 minutes.
IF YOUR KETTLE HAS BEEN DROPPED, IF IT LEAKS OR IF THERE IS VISIBLE DAMAGE TO THE POWER CORD, THE PLUG OR THE BASE OF THE KETTLE
Return your kettle to your After-Sales Service Centre, only they are authorised to carry out repairs. See the guarantee conditions and list of centres in the booklet supplied with your kettle. The type and serial number are shown on the bottom of your kettle.
This guarantee covers manufacturing defects and domestic use only. Any breakage or damage resulting from failure to comply with the instructions for use is not covered by the guarantee.
The manufacturer reserves the right to modify the characteristics or components of its kettles at any time in the interests of the consumer.
Do not use the kettle if damaged. No attempt must be made to dismantle the kettle or its safety devices.
If the supply cord is damaged, it must be replaced by the manufacturer, its after-sales service centre or a similarly qualified person, in order to avoid any danger.

PREVENTION OF DOMESTIC ACCIDENTS

For a child, a burn or scald, even if slight, can sometimes be serious.
As they grow up, teach your children to beware of hot liquids to be found in the kitchen. Position the kettle and its supply cord well to the rear of the work surface, out of the reach of children.
If an accident does occur, run cold water over the scald immediately and call a doctor if necessary.
In order to avoid any accident: do not carry your child or baby at the same time as drinking or carrying a hot drink.

ENVIRONMENT PROTECTION FIRST!

Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) requires that all used household appliances are not disposed of along with ordinary household waste. Used appliances must be collected separately in order to maximize recovery and recycling of their constituent parts and thus reduce their impact on health and the environment.