REDNECK BLINDS 6X6 Buck Palace Support Bracket Instruction Manual
- June 4, 2024
- REDNECK BLINDS
Table of Contents
REDNECK BLINDS 6X6 Buck Palace Support Bracket
Installation
Supplied with your 6X6 Redneck Blind are two support brackets that are used to
provide additional support to the rear portion of the blind. Please follow the
instructions for assembling your hunting blind and refer to these instructions
when needed. Before tightening the 3/8″x 2″ bolts that attach your 6X6 Buck
Palace to the Base Platform, slide the braces between the blind and platform
as shown in Figure 1.1. Slide the braces toward the rear of the platform until
the hook catches on the 3/8″x 2″bolt. Ensure that the vertical leg of the
brace indicated in Figure 1.2 is flush with the side of the platform. Fasten
the hardware.
The hole in the brace is for manufacturing purposes only and will not be used for blind assembly.
Should you have any questions about the assembly, installation, or use of this product, or any other Redneck Manufacturing product, please call one of our customer service representatives toll-free at 877-523-9986. READ THESE INSTRUCTIONS IN ENTIRETY PRIOR TO ASSEMBLING THIS PRODUCT.