QAZQA Athens WL Indoor Modern Wall Lamp Instruction Manual
- June 12, 2024
- QAZQA
Table of Contents
QAZQA Athens WL Indoor Modern Wall Lamp
Product Information
- Product Name: Athens WL
- Input Voltage: 220-240V~
- Frequency: 50Hz
- Maximum Wattage: 2x G9 Max.28W
- Suitable Light Source: G9, Halogen Max 28W
- Manufacturer (Netherlands): FittinQ B.V., Smaragdweg 52, 5527 LB Hapert
- Manufacturer (United Kingdom): FittinQ LTD, 55 Baker Street, London, W1U 7EU
Product Usage Instructions
- Ensure the power supply is switched off before installing or replacing the light source.
- Carefully remove the glass shade and net wire shade from the fixture.
- Insert the suitable light source (G9, Halogen Max 28W) into The socket. Make sure it is securely in place.
- Reattach the glass shade and net wire shade onto the fixture, ensuring they are properly aligned and secured.
- Connect the fixture to a suitable power source with an input voltage of 220-240V~ and a frequency of 50Hz.
- Switch on the power supply and test the light fixture to ensure it is functioning correctly.
- If necessary, adjust the positioning or angle of the Athens WL to achieve the desired lighting effect.
Note: For any further information or troubleshooting, refer to the instruction manual or contact the manufacturer.
Safety Precautions
Athens WL
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come
into contact with any areas of the terminal connections or voltage control parts. -
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution
box, before any installation, maintenance, or repair work is undertaken. -
Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Meaning of symbols:
-
Take note of the symbols when connecting wires:
- Live conductor
- Earth
- conductor
- Neutral
- conductor
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl