HIGH LIFTER FS-RZRPRO-01 Frame Stiffener Sub Frame Gusset Kit Installation Guide
- June 12, 2024
- HIGH LIFTER
Table of Contents
HIGH LIFTER FS-RZRPRO-01 Frame Stiffener Sub Frame Gusset Kit
Product Information
- Product Name: FS-RZRPRO-01
- Product Description: 79-1 5030 POLARIS RZR Pro XP 1000 Sub-Frame Support Kit
- Manufacturer: High Lifter Products, Inc.
- Contact Information: Phone: 1-800-699-0947, Email: sales@highlifter.com
- Address: 7455 Atkinson Drive, Shreveport, LA 71129
PRODUCT DISCLAIMER
Please install any warning labels provided with the product in a visible
location for yourself and all passengers. Notify all passengers of the
modifications made to your vehicle before operating it. Modifying your vehicle
with this product may affect your insurance coverage. Check with your
insurance carrier to ensure your coverage remains sufficient. Installing this
product may also void your vehicle warranty. If this is a concern, contact the
manufacturer or dealer before purchasing or installing the product. The
installation of products sold or manufactured by High Lifter Products, Inc.
including, but not limited to suspension components such as lift kits, gear
reduction lifts, frame stiffener kits, snorkels, and tires that exceed the
original specifi cations for the vehicle, may change the vehicle’s center of
gravity and handling characteristics both on- and off-road. You are aware that
the installation of tires that are larger than original vehicle
specifi cations may reduce the effectiveness of the braking system. Use of
these products may place added stress to the original factory vehicle
components which could cause them to weaken or possibly fail.
Products sold or manufactured by High Lifter Products, Inc. are intended for
off-road use only. Operation of a vehicle modifi ed with these products on a
road could result in serious bodily injury or death, and such operation may
violate the laws of your state or municipality. You agree to operate your
vehicle exclusively in the manner intended by the vehicle manufacturer. You
agree that failure to safely and reasonably operate your vehicle could result
in serious bodily injury or death, and that, as a result of installation of
this product(s) to your vehicle, extreme care must be taken to prevent vehicle
rollover or loss of control, which may be more likely to occur as
a result of said modifi cations. You will avoid unsafe maneuvers, including
sudden sharp turns or other abrupt maneuvers, which could make a vehicular
accident more likely. You understand that High Lifter Products, Inc.
is not responsible or liable for any damages or any injuries to yourself or
your passengers that could occur
upon possible accidents due to driver error, incorrect installations, bad
judgment, incompatibility with other aftermarket accessories or natural
disasters to the fullest extent allowable by law.
You will have all vehicle occupants fasten seatbelts, if equipped, and wear
proper safety equipment, such as
DOT approved helmet and eye protection prior to operating the vehicle. You
understand and acknowledge that failure to wear proper safety equipment may
increase the risk of serious bodily injury or death to yourself and any
passengers.
Proper installation of products sold or manufactured by High Lifter Products,
Inc. requires knowledge of the factory recommended procedures for removal and
installation of original equipment components. Installation
of these products without proper knowledge and experience may affect the
performance of these components and the safety of the vehicle and cause
serious bodily injury or death. It is strongly recommended that a certifi ed
mechanic familiar with the installation of similar components perform the
product(s) installation.
Prior to installing any products sold or manufactured by High Lifter Products,
Inc., you will perform or cause
to be performed an inspection of their vehicle to confi rm its condition is
suitable for the installation of these products. A proper inspection of the
vehicle includes confi rmation that the vehicle has not been in a collision and
is free of corrosion. If the vehicle is suspected to have been in a collision
or misused, or is otherwise unsuitable for modifi cation, you will not install
the product(s). You will continue to inspect the vehicle prior to each use to
confi rm its condition is suitable for its intended use, and you acknowledge
that the failure to do so may result in serious bodily injury or death, as
well as damage to the vehicle itself.
You will install any warning labels provided with the product so it may be
prominently seen by yourself and all passengers. You will notify all
passengers of the modifi cations performed to your vehicle prior to operation.
Insurance companies may handle coverage of a modifi ed vehicle differently.
Please check with your insurance carrier prior to modifying the vehicle to
ensure your coverage remains suffi cient.
Installation of this product(s) may void your vehicle warranty. If this is a
concern, please check with the manufacturer or dealer before purchase or
installation of this product(s).
High Lifter Products, Inc., 7455 Atkinson Drive, Shreveport, LA 71129 – Phone:
1-800-699-0947
Read Before Installation:
If you are a dealer or installer, it is your responsibility to inform your customers and end users about the potential hazards of operating a side-by- side equipped with this component. Owners should notify anyone operating the vehicle, as well as any passengers, that the vehicle has been modified. By purchasing and installing High Lifter products, user agrees that should damages occur, High Lifter will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. High Lifter will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from High Lifter. The total liability of seller to user for all damages, losses, & causes of action, shall not exceed the total purchase price paid for the product that gives rise to the claim.
DEALERS AND INSTALLERS
You are responsible for informing your customer and end user of the
information contained above and the increased potential hazards of operating a
side-by-side equipped with this component. All owners need to be informed that
it is their responsibility to notify anyone operating the vehicle, as well as
any passengers, that said vehicle is modified.
PARTS DIAGRAM
FRAME STIFFENER & HARDWARE
FRAME STIFFENER & HARDWARE FS-RZRPRO-01
- Frame Stiffener (1ea) – Part Number: 79-14824
- M12x80mm Flange Head Bolt (2ea) – Part Number: 54-96123
- M12x120mm Flange Head Bolt (2ea) – Part Number: 54-96125
- M12x1.75 Lock Nut (4ea) – Part Number: 54-96126
REMOVING STOCK COMPONENTS
- Remove the factory bolts connecting the lower control arms to the frame.
- Position the frame stiffener plate 79-14824 to align the tab holes with the frame.
PASSENGER SIDE
- For safety, ensure that the unit is supported with jack stands before working under it and removing the lower control arm bolts. Refer to step 2 images for proper jack placement.
- Remove the factory bolts connecting the lower control arms to the frame.
STIFFENER
Replace the factory hardware with 12mmx80mm bolts (front), 12mmx120mm bolts (back), & 12mm lock nuts.
FASTEN HARDWARE TO FACTORY SPECIFICATIONS.
Installing the Frame Stiffener:
- Position the frame stiffener plate (Part Number: 79-14824) to align the tab holes with the frame.
- Replace the factory hardware with 12mmx80mm bolts (front), 12mmx120mm bolts (back), and 12mm lock nuts.
- Tighten the hardware to factory specifications.
HIGH LIFTER LIMITED LIFETIME WARRANTY
High Lifter offers a Limited Lifetime Warranty to the original purchaser that our product shall be free from defects in material and workmanship for the life of the product if utilized in accordance with the manufacturer’s instructions for installation and operation of said products. The product is warranted to be free from defects in material and workmanship for the life of the product if utilized in accordance with the manufacturer’s instructions for installation and operation. The warranty extends to various product lines, including lift kits, control arms, trailing arms, radiator relocation kits, portal gear lifts, wheel spacers, tow hooks, and control arm link kits. This warranty is exclusive and replaces any implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality, except for the warranty of title.
LIMITED LIFETIME WARRANTY EXTENDS TO THE FOLLOWING PRODUCT LINES:
- Lift Kits (Signature, Standard and Big Lifts)
- Control Arms
- Trailing Arms
- Radiator Relocation Kits
- Portal Gear Lifts
- Wheel Spacers
- Tow Hooks
- Control Arm Link Kits
Damages to vehicle or any other object during the installation, use, or
removal of High Lifter products are not covered under this warranty. Normal
wear items included with any of the products covered under this Limited
Lifetime Warranty are excluded from coverage. These items include, but are not
limited to heim joints, tie rods, bearings, bushings, seals, gaskets, zinc
plating, painted and powder coated fi nishes. Other exclusions of coverage
under this warranty include, but are not limited to: damage or product failure
due to improper installation, lack of maintenance, product modifi cation,
abuse, collision or use on vehicles for which product was not designed,
repairs performed by anyone other than approved High Lifter personnel or made
using non-High Lifter components. This warranty is valid for the original
purchaser only and is non-transferable. High Lifter reserves the right to
inspect any product before determining if the claim is valid and covered under
this warranty. Claims determined to be caused by reasons other than a
manufacturer defect will be rejected and an estimate for repair or cost of a
replacement product if a repair is not possible, will be provided.
This warranty is exclusive and is in lieu of any implied warranty of
merchantability, fi tness for a particular purpose or other warranty of
quality, whether express or implied, except the warranty of title.
Warranty Processing:
If you suspect your product is defective, do not disassemble it without prior approval, as it may void your warranty status. Contact the warranty team at warrantycare@highlifter.com to begin the claim process and include the following information in the email:
- Your contact information
- Proof of purchase
- Description of the issue
- Photos or videos showing the defect
- Photos of the product installed, and vehicle product is installed on
- Proof of Purchase (Required for all warranty claims and you must be the original purchaser)
Once a claim is created, you will receive a return authorization number (RMA). Write this number on the outside of the box containing your defective product and include it along with your name and contact information inside the box. Product must be returned in the original box or a box of equal strength and packaging. Product sent without an RMA number visible on the outside of the box or sent COD will be refused. Ship your product to the following address:
High Lifter Products, Inc.
Attn: Returns 7455 Atkinson Drive, Shreveport, LA 71129
Once your product is received, we often have your replacement or repaired
product shipped back to you within 3-business days of receiving it. Please
note that High Lifter is not responsible for shipping charges on product
returned for warranty or repair, including duties and fees required by those
residing outside the United States.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>